which wideband to get

[twistiert]

Hey guys whats goin on Im just wondering what wideband display to go with either the plx m300 http://cgi.ebay.com/ebaymotors/PLX-M-300-Wideband-O2-Controller-w-Sensor-and-Display_W0QQitemZ290102399127QQihZ019QQcategoryZ10 7063QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

or the ngk afx http://cgi.ebay.com/ebaymotors/PLX-M-300-Wideband-O2-Controller-w-Sensor-and-Display_W0QQitemZ290102399127QQihZ019QQcategoryZ10 7063QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

alrite thanks guys

[Speed3.5]

hmmmm
you should've snatched one from members that sold them cheaper than that
but other wize its up to you imo about plx m-300 wb , nothing new on em so .........

now ngk afx link shows plx m-300 so fix that too

[twistiert]

sorry heres the link for the ngk one http://cgi.ebay.com/ebaymotors/NGK-NTK-Wide-Band-Powerdex-AFX-Air-Fuel-Gauge-Wideband_W0QQitemZ180103715824QQihZ008QQcategoryZ3 8650QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[Speed3.5]

like it says in the ngk cover box "affortable ....."
it's cheaper than the other one but more than that is just a wb w/ different output box instead of aem that comes like most gauges .
you're pick man

[Kansei]

The NGK is really nice, and plus we have an awesome, awesome place to mount the NGK AFX in our cars..

http://farm1.static.flickr.com/185/443040098_ea71a45951_b.jpg

it sits right in the spot where the ashtray was, and even without the included velcro (installed since that picture was taken) it fits nice and tight and doesn't rattle. Plus it's crazy stealthy there :)

Oh and don't waste your time on eGay for the NGK..

http://www.boostcontroller.com/index.php?category=150

like 5 bucks more and from a reputable company that is an authorized NGK reseller so you will have a warranty on it :)

[Speed3.5]

i have the Greddy TT there kansei but what ever works that's all it matters

[twistiert]

thanx kansei you just made my decision alot easier Im going with the ngk one how does it look lit up down there

[Kansei]

Looks great.. I'll see if I have a pic of that online somewhere.

Edit: I don't have one, but I'm leaving in a couple minutes and my car is in the garage so I can turn off the lights and snap a pic.

[low_psi]

I've been really happy with the PLX M300 I've used but just like you I've also been trying to decide whether to buy my own PLX or a NGK. I think that picture above just sealed the deal for the NGK.

[Kansei]

I took a bunch of pics with the NGK turned on but my camera is in the garage and it's snowing so screw you guys I'm staying warm haha

[twistiert]

lol thanx I see how it is

[503MSP]

so those of you that are getting or have an WB installed are you guys getting a second o2 bung installed on your mid-pipes? Sorry for the newb question and thread invasion

[Prodigy]

I have mine welded at the end of my downpipe.

Bump for night pics!

[Kansei]

end of the downpipe works for me too. the corksport has a bung there, that's the one I'm using (since the one in my midpipe is used for my post-cat sensor.

[twistiert]

the factory j pipe has a bung in it if your not using it or corksport has one it and what not