T25 on MSP manifold?

[ho bag]

Well my search for a stock gt25 is not going so well, im about a month away from saying fawk it and using a regular t25.

Will the regular t25 work on the msp manifold and also the s and j pipe? I already have these parts so i woudl like to use them as well.

Oh if you have a GOOD WORKING gt25 turbo u wanna sell me for a REASONABLE price let me know asap!

[jeffmsp]

you will need a new manifold or some creative work getting a dsm or nissan t25 to fit on the callaway manifold, at the least you would need an adaptor plate and a=then grab a ebay sr20 downpipe and do some negotiating with a hammer to make it all fit by the AC.

[ho bag]

A regular old garrett t25 should have the same flange. Bolting it to the manifold should not be hard.

[msp35]

Then why did you ask on the forum if you had the answer?

[jeffmsp]

ya dont believe it has the same flange, the dsm flange, nissan flange are both different then the T25R i believe. If that was the case a dsm T28 would be a direct drop in on the msp..theres a reason i dont have a t28 on my car man lol i wish

[ho bag]

ffs....What about using a gt25rs hotside and regular t25 center section/coldside? Could be a cheap replacement....

[PlatinumMSP]

Well my search for a stock gt25 is not going so well, im about a month away from saying fawk it and using a regular t25.

Will the regular t25 work on the msp manifold and also the s and j pipe? I already have these parts so i woudl like to use them as well.

Oh if you have a GOOD WORKING gt25 turbo u wanna sell me for a REASONABLE price let me know asap!

why not go for a gt28rs?

[Sleepy]

So a T25 flange isn't always a T25 flange? I'm interested in this because I'm trying to put together an MSP based turbo kit.

[PlatinumMSP]

So a T25 flange isn't always a T25 flange?

to my knowledge the gt28rs directly bolts up to the stock msp manifold and s-pipe

[69RMSP]

http://www.mazdas247.com/forum/showthread.php?t=123665210


Well my search for a stock gt25 is not going so well, im about a month away from saying fawk it and using a regular t25.

Will the regular t25 work on the msp manifold and also the s and j pipe? I already have these parts so i woudl like to use them as well.

Oh if you have a GOOD WORKING gt25 turbo u wanna sell me for a REASONABLE price let me know asap!

[ho bag]

http://www.mazdas247.com/forum/showthread.php?t=123665210
Im confused... I dont need a manifold, i have the manifold/s/j pipe already. i need a turbo that will let me use all these parts together.

[69RMSP]

woops


Im confused... I dont need a manifold, i have the manifold/s/j pipe already. i need a turbo that will let me use all these parts together.

[djarkitek]

i have a turbo but it's been drilled to fit a bigger oil out tap. and it needs to be cleaned

[ho bag]

i have a turbo but it's been drilled to fit a bigger oil out tap. and it needs to be cleaned
How much?

[HondaEat-R]

A older T25 SHOULD fit w/ no problem. All the companies that have a lot of experience w/ selling turbos advertise that the gt25r is a great and easy replacement for older T25's and T28's, and that the gt28rs is a drop in replacement for the T25's and T28's that came on different years of Nissan Silvias. If that info is correct, than you should be able to use a T25 or T28 on our mani w/ no problems. The bolt patterns should be exactly the same.

[719prottege]

I have the stock Gt25r on my car right now, but im thinking of going back NA so i can get my friends 240sx. PM me and we'll talk