PDA

View Full Version : Strut bar installation


ImANerdyPunk
03-22-2007, 12:07 AM
How difficult is it to attach a strut bar? Just a few bolts? Any advice from anyone who's done it would be appreciated.
D-rock240
03-22-2007, 12:42 AM
Which strut bar?
IukekiniProtege
03-22-2007, 01:10 PM
for mine, all i had to do was remove the 4 bolts per strut on top and place the brackets on and bolt them back down, think i torqued them to 34ft.lbs i believe, and then just attached the bar, for other strut bars idk how hard it is, i know that the MSP/P5 one has a special bracket for cruise control or w/e, besides that its probably the same...Just make sure when you are taking the bolts off the strut to be on level ground, wheels straight, and car not on a jack...

quick pic of what mine looks like..
http://www.webxdesigns.net/ROTM/DSCF4495.JPG
ImANerdyPunk
03-22-2007, 10:02 PM
Which strut bar?


Front.
D-rock240
03-23-2007, 09:41 AM
I meant which brand strut bar. The OEM one bolts on using brackets, but the aftermarket ones bolt up differently.
ImANerdyPunk
03-23-2007, 05:33 PM
I meant which brand strut bar. The OEM one bolts on using brackets, but the aftermarket ones bolt up differently.

I'm looking at the Corksport one.