Looking for MZ3 to protype motor mount

[SLSPERFORMANCE]

We here at SLS are looking to open up our current line and add the MazdaSpeed 3 motor mount to the card. We are actively looking for a Speed 3 to protype a Rear Motor mount on. The cost is FREE and we will need your car for 1-2 days. Please send me a PM.

Our motor mounts are second to none. The custom bushings we make offer some of the best vibration dampening on the market. Do a search and see what others are saying.

[shalezoom3]

Make a #3 motor mount for the regular 3!!! lol. good luck

[SLSPERFORMANCE]

We are looking for a Regular 3 as well.

[shalezoom3]

ohh man...if you could make a #3 (Passenger Side, by coolant tank) that would be F*cking Awesome!!....keep me posted. And if you need a car, I can easily make a trip up north.

[Boother]

There are already several rear mounts to choose from for the MS3. What we need much more is a replacment for the tranny mount and the passenger side mount!

[SLSPERFORMANCE]

There are already several rear mounts to choose from for the MS3. What we need much more is a replacment for the tranny mount and the passenger side mount!

Get us a car and we can see what we can do for those mounts.

[shalezoom3]

There are already several rear mounts to choose from for the MS3. What we need much more is a replacment for the tranny mount and the passenger side mount!


ahh the dreaded tranny mount....have they put out a recall yet..lol.

[nondual]

There are already several rear mounts to choose from for the MS3. What we need much more is a replacment for the tranny mount and the passenger side mount!
And the driver's side mount!

[oatmealboy]

And the driver's side mount!

The tranny mount IS the driver side mount. IIRC, the engine is supported by only three mounts.

[ptperformance]

We are working on the tranny mount right now. The fluid filled piece of crap that it is really needs some work but the real problem is if you replace one you may have to replace the other (passenger side) due to all the movement getting transferred over to the passenger mount. Working on a fix guys.

[808Mazda3]

Hopefully someone does make the passagner side one soon.. I broke my not to long ago, and had the dealership fix it. Good thing it was under warrenty still.

But if there is a tranny and the passagner side mount i would love to know so i get replace them. Only bad thing is i cant drive over the ocean, to get test parts since i live in hawaii. But i wouldnt mind buying once its fixed and works good. Keep me informed on this.

[tsunami]

yeah the bottom/rear mount is in abundance as it was probably the easiest to do with out cuasing other issues as well.... but the two side mounts would be great to hold it tight and take some of the stress off of the transmission as that is where it goes with just a rear mount...

[zumzumzoom03]

yeah the bottom/rear mount is in abundance as it was probably the easiest to do with out cuasing other issues as well.... but the two side mounts would be great to hold it tight and take some of the stress off of the transmission as that is where it goes with just a rear mount...

I hate to go off topic a little... but why can't Mazda make a damn engine mount! There are cars out there with way more power than ours but never have any problems with engine mounts.

[jhowey]

PTP are you working on it for the Speed 3 or the regular 3?

I dont know why but Mazda cant make Motor Mounts if there life depended on it all Mazda's mounts give, but the 2.0 at 626 is by far the worse of them all, giving after 4 years on almost every one and over 400 for factory new ones.

[jhowey]

SLS i dont know if im aloud to on this forum but I can sell you factory mounts at a descent price if it was okay per the rules so you can have the mounts to fabricate the top trans and eng mnt on a Speed 3