FS: FMIC, Hardpipes, BOV

[butter5784]

SOLD THANKS FOR THE OFFERS AND COMMENTS




I'm selling my old FMIC, Hardpipes, and BOV. None of these items have brand names. They were on my wife's car when we bought it. We installed a full Perrin FMIC kit and have no need for this one.

Now some details.

The pipe comming off the Turbo is the stock pipe. There is a large hole in the pipe were something was removed. They had covered that whole with a peice of coupling to keep it from leaking. The BOV was poorly mounted with screws. I would imagine a peice could be easily welded to be right or you can reinstall it the way it is. The front bumper beam was cut for the installation. I'll include the two end peices so you don't have to cut yours if you choose to intall it the same way. Other than that the puctures speak for themselves.

I'm looking for $300 plus shipping. I would prefer local pick up but can figure out shipping.
http://www.msprotege.com/members/butter5784/100_6217.jpg

http://www.msprotege.com/members/butter5784/100_6221.jpg

http://www.msprotege.com/members/butter5784/100_6222.jpg (http://www.msprotege.com/members/butter5784/100_6221.jpg)

[sandspeed]

If your looking for a nice exhaust for the msp check out this corksport exhaust. It used to be mine then i sold it to fredo...check it out.

[butter5784]

I need somthing with a cat..


If your looking for a nice exhaust for the msp check out this corksport exhaust. It used to be mine then i sold it to fredo...check it out.

[sandspeed]

right on...just trying to help out a friend. You could always weld in a high flow cat;)

[ho bag]

Do you have any pics of it installed on the car?

[kamon8404]

What intake were you running with this set up?

[butter5784]

What intake were you running with this set up?

I think any intake will work expcept for the factory. When I got it it was a generic pipe comming off the turbo with a universal cone filter. I still have the filter if you would want it included but I used the pipe with my current setup..

I'll try and find some pictures....

[butter5784]

Here are some pictures of the FMIC when it was installed. I sent links because these pictures are big like the ones above.

http://www.msprotege.com/members/butter5784/Old%20FMIC/30642034-23sm.jpg

http://www.msprotege.com/members/butter5784/Old%20FMIC/30642034-2sm.jpg

http://www.msprotege.com/members/butter5784/Old%20FMIC/30642034-64sm.jpg

http://www.msprotege.com/members/butter5784/Old%20FMIC/30642034-66sm.jpg

[butter5784]

Bump.

[dannyboy17]

Selling the intake pipe? Ill take it :)

[butter5784]

Only selling what's in the pictures. I reused the intake pipe on my current set up. I used it to extent the Perrin intake so the filter wasn't directly under the vents in my hood.

[butter5784]

Metallic36...... Shipping Quote Sent..

[butter5784]

Bump

[butter5784]

Bump again...

I know someone could use this setup.

[kys10x]

good job on getting the perrin! it looks to me like the guy who had the car before you did the ebay job. and please make sure that nasty lower grill is taken out. it ruins how nice your car is.... oh ya bump

[Boosted03MSP]

Hmm, i may consider it. I am in Joppatown so not that far from you :)

[butter5784]

The picture is of the car the way I bought it. The Grill is long gone. The perrin is great quality but the directions sucked. The car has had many changes in the two months we've owned it. It doesn't look or run the same at all.


good job on getting the perrin! it looks to me like the guy who had the car before you did the ebay job. and please make sure that nasty lower grill is taken out. it ruins how nice your car is.... oh ya bump

[butter5784]

Sold

Thanks for all the intrest and offers.