FS: Hi flow fuel system for your turbo 3rd gen Protege

[ddogg777]

This is the ultimate fuel system for running however much power you'd like. The Mallory inline pump (model 110FI (http://go.mrgasket.com/pdf/Fuel_System_Products.pdf)) will flow 110gph (over 400lph!!) and has only been used for less than an hour. It will handle any high pressure assignment you give it. You can buy a brand new one for $269.99 (http://www.centuryperformance.com/detail.asp?Product_ID=MAL-5110FI) (retail over $450), or you can buy my entire setup for SOLD!. The billet fuel rail is a MAM fuel rail that is made for RC injector length--check my other thread for RC550s. It will have to be polished again due to some scratching from the engine bay. The high pressure filter is a simple mercedes filter that you can replace for $20 at autozone. The blue fuel lines, fuel pump, aeroquip connectors and filter are all the same age, practically new. The rail has been on my car for a while. You can choose your fuel regulator too; I preferred the mallory, it is a better design, though the aeromotive is more costly. Both can be rebuilt in the future with online parts. The electric fuel pressure sensor is not included, but the gauge is. This has everything you need to hook it up. I even have some pictures of it installed before I took it off.

[ddogg777]

I forgot to mention that the pump comes with an automotive relay and fuse,wire clip so that you can hook it directly to the spare fuse in our relay box.

[ddogg777]

I also have an intake Walbro 255lph pump that was used for about 1000miles. If you'd like to have the Walbro instead of the Mallory and just have a single intake high flow pump, I'll knock off $50. Total: $350

[ddogg777]

price lowered

[ddogg777]

$385 shipped.

[musiclikscreams]

bump for a honest, reliable seller

[ddogg777]

This is good stuff here fellas.

[ddogg777]

This is good stuff here fellas.

[ddogg777]

price reduced...

[ddogg777]

Even more reduced...They will go down steady until someone bites... :)

[big Lou]

hope its still for sale in about a week ill have enough money to glady take it off your hands

[ncsukingpin]

so how much for the setup without the injectors ... i was told the stock can handle plenty of fuel for my setup.

[ddogg777]

I don't know how much you're planning on making but I do know that the stock pumps are small and designed to work at vaccuum. Some of our pumps might handle 6-10psi. Some might not. There is a window of overengineering so that the pump shouldn't fail at normal functioning range, which is not boost.
I upgraded my fuel pump so that I could increase that window. Coiled motors degrade over time, one day I might have started running leaner, and then even more leaner, and then, pop...
It's a security thing... :)

[PHRiSCo]

pm sent!

[ncsukingpin]

um, im confused. I was talking about the injectors, not the fuel pump.

[khaosman]

I've got a question for you... what kind of adapters did you use to hook up to the stock lines?

[ddogg777]

I've got a question for you... what kind of adapters did you use to hook up to the stock lines?

I didn't use stock lines.

[khaosman]

I didn't use stock lines.

I think I worded it poorly, or maybe I understand it wrong. But you have the line going from the new fuel rail to your accessories, and then another custom line going to the stock hard-lines near the firewall, correct?

[ddogg777]

Oh, right! I just used hose clamps. Not the best thing but I couldn't find a better alternative.

[ddogg777]

Reduced!

[PHRiSCo]

Some components SOLD TO ME! The fuel pump /w hose and fuel rail are still available. I guess ddogg777 will have to modify this thread.

PAYPAL SENT!