PDA

View Full Version : o2 sensors and simulators

RevLimitLaunch
02-18-2007, 02:13 PM
alright gettin ready to do a custom catless downpipe on the ms6, lookin to see how many o2 sensors there are and if anyone has a recomended place to get some simulators for them ((fu) to cel's) thanks
jcgemt2003
02-18-2007, 04:43 PM
alright gettin ready to do a custom catless downpipe on the ms6, lookin to see how many o2 sensors there are and if anyone has a recomended place to get some simulators for them ((fu) to cel's) thanks
2 o2 sensors one before the cat and one after....not aware of any ghost o2s....
4DRHTRD
02-18-2007, 05:51 PM
Just put a diode on the 2nd O2 sensor, piece of cake and costs $1.99.
http://www.audiworld.com/tech/eng53.shtml
Works wonders on mine.
RevLimitLaunch
02-19-2007, 03:21 AM
nice and thanks. this seems like the easiest least $$$ project. are the wire colors the same for the ms6 tho?




also i've found this tech on spark plug foulers being used..just wondering what anyone thinks of them



http://forums.evolutionm.net/showpost.php?p=1505717&postcount=2
jdub260
02-19-2007, 09:02 AM
2 o2 sensors one before the cat and one after....not aware of any ghost o2s....

I didn't get pictures but when I had my exhaust done there was only one before the cat. I didn't have one after my cat, I almost removed it but decided against it.
4DRHTRD
02-19-2007, 11:05 AM
Nope, use the diode, same color wire.
Mike
RevLimitLaunch
02-19-2007, 12:34 PM
oh ok, and you only needed to do it on the 2nd o2 sensor? works for me i guess. thanks alot, great help!
RevLimitLaunch
02-27-2007, 06:15 PM
alright so one other question, what is the thread size on the o2 sensors? lookin for bungs lol.
4DRHTRD
02-28-2007, 10:42 AM
oh ok, and you only needed to do it on the 2nd o2 sensor? works for me i guess. thanks alot, great help!
Only 2nd O2 sensor, DO NOT TOUCH the 1st O2!!!!
I have no idea what size the threads are but email info@atpturbo.com and they can sell you the right sized bungs.
RevLimitLaunch
02-28-2007, 12:37 PM
i guess i should've edited my post earlier, found out its m18x1.5 which i guess is pretty universal to almost all cars.
Booster
05-17-2007, 03:54 PM
Do I only need to put the diode on the black cable or a diode in each cable.

My sensor have 4 cables 2 whites 1 black and 1 grey.

I understand i have to put the diode only in the black cable, is that correct?

TIA

Nope, use the diode, same color wire.
Mike
RevLimitLaunch
05-17-2007, 06:16 PM
i'd use a spark plug fouler type trick if i were you, check ebay, its an m18x1.5 like other cars. just search 'o2 simulator' and pages upon pages will come up.

mazda will extremely frown upon seeing a hacked up o2 wire lol. i do believe it is that wire though, but i'd wait to find out for sure.
Chris-BE
05-17-2007, 07:29 PM
Do I only need to put the diode on the black cable or a diode in each cable.

My sensor have 4 cables 2 whites 1 black and 1 grey.

I understand i have to put the diode only in the black cable, is that correct?

TIA

Black= Signal wire, White wires= heater, Grey= Ground.

Connect the diode to the Black wire, with the white stripe on the diode facing AWAY from the sensor.

You can also get a non-fouler kit at the autoparts store. Just drill out the last half to fit the o2 sensor.

http://i21.photobucket.com/albums/b273/focaljet/non-fouler%20o2cheat/1.jpg
Booster
05-26-2007, 07:51 PM
Hi!

Just to let you know that I did the diode trick on the black wire, and with the ATP 3071R turbo kit and of course the ATP DP do not have a cat.

I have no CEL's.

I am happy!



i'd use a spark plug fouler type trick if i were you, check ebay, its an m18x1.5 like other cars. just search 'o2 simulator' and pages upon pages will come up.

mazda will extremely frown upon seeing a hacked up o2 wire lol. i do believe it is that wire though, but i'd wait to find out for sure.