turbo kit for sale.

[cfpkiller]

hi all have another post for my turbo kit. It is currently still on car but I will included all the parts to make this direct bolt on. parts listed are turbo manifold and t25 turbo and downpipe, FMIC and all pipes, couplers and elbows, modified AEM short ram intake, coolant lines and T's, oil cooler line and oil line T-adaptor to oil pressure sensor. catless midpipe, msp non flashed pnp ecu, stewart warner boost gauge, autometer air fuel meter. a-pillar 2 gauge pod all all electrical connectors and vacuum lines ull need, blow off valve. Install is straight foreward. Ill even throw in lower oil pan with oil return line fitting and oil return line. all this for 1500.00 shipped to most lower 48 states. here are some pics ill have better pics if anyone is serious.NOTE THAT THERE MAY BE PAYPAL FEES

[cfpkiller]

somemore pics, just to add im a mechanic so the install was clean and when its removed it will be cleaned and packaged.

[djarkitek]

how much hp did you get out of it? what psi did you runi t at

[bazooka joe]

nice price!! good luck!

[jomoyo069]

hell yeah thats cheap

[cfpkiller]

nice price!! good luck!

hehe thanks i hope ur not poking fun at the price, but i felt its fair since im including alot of good stuff minus the afc. I didnt get a chance to dyno but it felt like an msp with exhuast, cold air. maybe a bit faster cause i dont have a body kit or audio equipment to weight it down lol:) oh i ran 6 psi for ever then when i got the midpipe i bumped it to 7 lol spiked to 8 hehe im a paraniod bitch.

[cfpkiller]

hell yeah thats cheap
thanks hope someone picks this up, this will be a nice saturday project to deturbo the car. maybe someone will want a low milage protege too, only 19k miles.

[bazooka joe]

thanks hope someone picks this up, this will be a nice saturday project to deturbo the car. maybe someone will want a low milage protege too, only 19k miles.

wow...that is low mileage

[cfpkiller]

wow...that is low mileage
yeah i dont drive it, only to a from work. Bought it brand new in feb 04 for
12k, after 6k in rebates. car was turboed after 6k miles. heres some more shots of my setup. was nice a clean and very discreet. no one knew i had a turbo(glare) i also forgot another thing the kit will come with a apexi turbo timer. turbo timer has voltage readings, air fuel ratio readings, o2 sensor voltage. ill even throw in a non fouler for second o2 sensor.

[bumpin_p5]

If only you had this up for sale about a month or so ago. That is a sick price what you are giving. Too bad I already have one.

[cfpkiller]

If only you had this up for sale about a month or so ago. That is a sick price what you are giving. Too bad I already have one.
hehe thanks man, i had my fun with it. no point making a profit. just want it gone so i can move on.

[kamon8404]

so you wanna trade for my msp turbo kit?

jk. Nice setup for a nice price

BUMPO!

[cfpkiller]

hehe ty, i keep forgeting things in my 1st post, im including a voodoo boost MBC with ceramic ball upgrade it is set at 7 psi. if someone is really serious ill throw in dsm afc at the kit for a total of 1700.00 just to put someone at ease
if u buy this kit i will need the entire amount 1st before i start taking everything off.

[JoseProte83]

i would take it aout from your hands of it wasn't cause i broke rim yesterday and had to replace some parts of the suspension cause a dam hole and ill b have to replace my rims for new ones since the ones i got arent made anymore.

[cfpkiller]

, just adding that if paying by paypal there may be a slight charge. i dont want to add to the price but i dont want to loose alot to paypal and there gay fees. can someone tell me what to expect from them if it goes for 1500?

[gone_fishin]

It would be beneficial to both you, and your potential buyer if you had the entire kit removed from your vehicle first. It sounds like you have alternate modes of transportation until you can complete the N/A conversion after the turbo removal anyway. I'm sure you're a stand up guy, but I know for a fact that it would be much easier for someone to fork over 1700 if they were loose parts.

[cfpkiller]

very good point, but i dont want to remove all this stuff if someone isnt serious. i was also playing with the idea of selling the whole car as it sits.
including all the stock parts to make it stock again. But thats another deal.
Ill deff keep it in mind, shoot someone may be able to come see it installed.

[gone_fishin]

Just trying to prevent you from raising any eyebrows, that's all.

[cfpkiller]

no prob im really considering taking it off tomorrow if i dont have anything better to do.

[AznXstazy]

how much hp did you get out of it? also where are you located?

[cfpkiller]

i never dynoed it, but like i said it felt more powerfull than a stock msp. I raced a 2004 spec v with cold air and nismo exhuast and beat him by 2 car lengths. thats the best i can tell you about how much power ur gona get. like i siad i have been really conservative on boost and it never went past 8 psi and that was spiked. im in charlotte nc btw

[ebmp5]

DAMN I WISH I HAD THE MONEY, well i did A WHILE BACK GOOD PRICE MAN
but i got one coming hopefully.

some buy this!!!!!!!!

bump for a good price!(first)

[cfpkiller]

wow near bottom bump.....anybody? this is all u need. It fit my lx bumper and it was tight install would be alot easier in a p5 or mp3 since u have alot more room. If your local i may be able to help install:)

[Keegz]

I want it, but I'm in Canada, and I'd hate to think what kind of shipping and duties I'd hafta pay on top of everything.

[cfpkiller]

:) hmmmm not sure how much shipping would be to canada, im not even sure what it would be to other 48 states, im just hoping it wont be to bad when i get to post office. when shipping i was planning on leaving sections of the ic piping intact to help with install and not have as box full of pipes for someone
to figure out where it all goes. i was gona number them from 1 to 8. 1 starting from the turbo and 8 ending at the throttle body. but if ur willing to pay extra for shipping i be more than happy to send it.:)

[cfpkiller]

<object width="425" height="350"><param name="movie" value="http://www.youtube.com/v/084XJ029ea8"></param><embed src="http://www.youtube.com/v/084XJ029ea8" type="application/x-shockwave-flash" width="600" height="350"></embed></object>

heres a quick vid of it in running. blow off valve sounds good in person.
alot of people complimented on how the car looks and people didnt even know it was turboed until i reved engine. I have been to small forums meets with this car in va and here in nc and car seems to get alot of attention because it aint a mp5 or speed or even an ES. car is a real sleeper and caught many honda's, acrura's, etc.... by suprise. Id embarass
them more if id just turn the boost up to 8 or 9. also if kit sells I got a walbro fuel pump and wagner front and rear motor mounts that will be for sale soon.

[Drake13]

whoa!!! this is a sweet ass offer. I think I might be highly interested depending on the outcome of my ride with Mazda. See form below

http://www.mazdas247.com/forum/showthread.php?t=123657849

This appears to be a straight forward direct bolt on setup with little to no modding. Are you still running the stock injectors? Why are you selling your kit?

[njaremka]

sorry, a little off topic - what fog lights are those?

[cfpkiller]

dam sorry about ur engine. im selling it because i dont dirv emy mazda anymore, I got too many cars, i have an 07 benz E350, 06 mazda 6i, 92 chevy s10 truck, 05 zx6r 636. just got too many toys and only me and my wife to drive em. plus I had my fun with my protege now im going back to stock and my be trading it in or selling it in the near future for a ms3, ms6 or
C280 benz. also may be ditching the mazda 6i to my sister inlaw who can take over paymnts. heres some pics i took while i was in garage. kit will be uninstalled by me and maticulasly unistalled and pcked for shipment. like i siad ill be including alot of nice stuff so price is firm. heres the pics dont worry about the paint on the manifold, ill its high temp paint and has been repainted in almost a year, ill shoot it again and run car so it bakes on nice. ill even give ya repl heatsheild bolts. shoot ill even throw in can of high temp paint.

[cfpkiller]

sorry, a little off topic - what fog lights are those?
eh some pepboys cheapo light that fit nicely but not really fucntional when lit cause it bounces when u go over bumps so i dont use them. looks good tho.

[cfpkiller]

whoa!!! this is a sweet ass offer. I think I might be highly interested depending on the outcome of my ride with Mazda. See form below

http://www.mazdas247.com/forum/showthread.php?t=123657849

This appears to be a straight forward direct bolt on setup with little to no modding. Are you still running the stock injectors? Why are you selling your kit?
oh a forgot ull need to trim or stock bumper were intercooler goes. bumper will not fit with intercooler installed. no biggie i just trimed 1/4 inch were bumper mounts to bumper support.

[Drake13]

So you had to trim the bumper support beam? Did you see my questions from my previous post?

[cfpkiller]

oh about injectors? yeah they r stock. thats all i needed with the boost i was running. and not the support beam just the inner part of bumper when intercooler would go. But that beacuse i have an lx bumper and not that huge msp or p5 bumper that has a large opening airdam.

[Drake13]

oh okay.. i should be good with my buddyclub2 then. How about what kind of oil are your running and whats the demintions/brand on the intercooler?


Why you selling your kit?

[cfpkiller]

oh okay.. i should be good with my buddyclub2 then. How about what kind of oil are your running and whats the demintions/brand on the intercooler?


Why you selling your kit?
i was using mobil 1, 5w30 i dont know the dimensions off the top of my head buy ill give ya ball park firgure. im selling it because im returning my car to stock and may be trading it in or selling it. anybody want to buy a 03 turbo
lx with 19k miles. 10k? here was my install btw, I installed the turbo in nov of 04, last pic was taken last feb 06 with bike

[Drake13]

haha i'd start a new post on that one dude. I'm sure there are TONES of questions people are going to ask you. As i got tone on the turbo itself.. like:

How does it start cold/hot?
I noticed you arn't running any other fans has it overheated on you before?
Is that a turbo timer in the pic with the gauges? If so is it included?

[cfpkiller]

haha i'd start a new post on that one dude. I'm sure there are TONES of questions people are going to ask you. As i got tone on the turbo itself.. like:

How does it start cold/hot?
I noticed you arn't running any other fans has it overheated on you before?
Is that a turbo timer in the pic with the gauges? If so is it included?

hehe yeah i hear that. just to answer ur mock questions, it starts fine hot or cold, i do have fans and i never overheated, and yes if u buy car for 10k u get all this stuff, icuding car, turbo all stock parts to make in completly stock again. hehe:)

[Drake13]

lol i'm not interested in the car as a whole.. just the turbo :). Once I hear word my new engine is installed with no issues.. well start talking business.

[cfpkiller]

yeah like i said all the work has already been done. (parts wise) all u needs extra is oil, coolant, permaseal gasket maker for lower oil pan, and u can reuse
ur exhuast dunut for downpipe. ill need mine for remounting my stock exhuast back on. msp ecu install is staight forward, apexi turbo timer is tricky tho. When i take it off ill let u know what wire i tapped into.

[cfpkiller]

lol i'm not interested in the car as a whole.. just the turbo :). Once I hear word my new engine is installed with no issues.. well start talking business.
i know ur not i was just saying itll save me alot of work and time if someone just took the car off my hands:)

[Drake13]

ya.. i bet it would.. how much you letting it go for?

[bluewater87]

pm sent...

[cfpkiller]

pm replied. hope this goes thru, i can walk u thru via phone or pm if u have trouble. u shouldnt tho, turbo and piping itslef is self explanitory, the turbo timer is gona be the tricky part, since intructions were unversal and it was trail and error to get it to work. all work out tho.

[Drake13]

sold?

[cfpkiller]

maybe.

[Drake13]

NOOO!!! damnit lol i just need 2 weeks.

[cfpkiller]

hey it still may be, hes just interested. i got a call him in a few minutes.

[Drake13]

is that a kawasaki 636 you got in your pic?

[cfpkiller]

is that a kawasaki 636 you got in your pic?
yup, thats another reason y need need to sell the turbo kit. I bought it and havent done nothing to it. i may get a yosh slip on and flush mounts

[Drake13]

i got a 06 zzr 600.. slip on yosh exhaust, frame sliders (must have) and led front blinkers.
http://a775.ac-images.myspacecdn.com/images01/38/l_09ed1923fb4283beb8f31dcdb293ae06.jpg

here is a site where i got mine.. the cheapest prices you'll find dude

http://www.motorcycleproshop.com/detail.asp?product_id=ZX649SOX

[cfpkiller]

cool, its a little better than local but ill check again. thanks buddy

[Drake13]

ya no problem.. just keep that kit attached to the car for me until i get my motor put in :)

[cfpkiller]

hehe:)

[Akaveli]

NOOOO!!!!! Say it ain't so!!!
I can vouch(sp) for cfpkiller. I met him in person several times at a number of different Mazda meets. Hes a cool and excellent person. :) His car is truely a sleeper. I've seen his car before and after the turbo kit was installed. One sick sleeper. Good luck with the sale.(first)

Free Bump!

[cfpkiller]

lol, thanks bro, long time no seee!!!!!!!!! im still keeping the car but turbo is gona go. thanks for having the time to talk to me AJ!! I remember when i bought the turbo kit i got out the cc and my heart was pumping.

[bluewater87]

cant wait for the booooooooost! thanks for all the info

[Akaveli]

lol, thanks bro, long time no seee!!!!!!!!! im still keeping the car but turbo is gona go.

lol it feels like its been decades since I last saw your car at the mazda meet we had in richmond.

[cfpkiller]

lol it feels like its been decades since I last saw your car at the mazda meet we had in richmond.
hehe i know bro those were fun days!! meeting at ihop in newport news.hehe:) u seen my new ride? 07 E350 sport with 18 inches of mb bling

[Akaveli]

hehe i know bro those were fun days!! meeting at ihop in newport news.hehe:) u seen my new ride? 07 E350 sport with 18 inches of mb bling

I donn't mean to thread jack reminiscing on old mazda meets. lol Your ride looks HAWT! I'm currently in the process of getting a new ride myself. I'm trying to decide bwt RSX, MS3 or a regular 3.

[cfpkiller]

I donn't mean to thread jack reminiscing on old mazda meets. lol Your ride looks HAWT! I'm currently in the process of getting a new ride myself. I'm trying to decide bwt RSX, MS3 or a regular 3.
hehe np bro, the kit might be sold anyways! get a MS3 you know you want it!!

[Akaveli]

hehe np bro, the kit might be sold anyways! get a MS3 you know you want it!!

yea I'm leaning more towards the MS3. My brother lives in your area, next time I visit him I could stop by.

[cfpkiller]

yea I'm leaning more towards the MS3. My brother lives in your area, next time I visit him I could stop by.
yeah bro, it would be nice to see ya again. give me a holla when ur in town. phone number is 704 685 1930

[Akaveli]

yeah bro, it would be nice to see ya again. give me a holla when ur in town. phone number is 704 685 1930

No problem. again good luck with the sale. (headbang)

[Drake13]

hey let me know how the "maybe" goes...

[cfpkiller]

SOLD 75% payment recieved

[Drake13]

F$%vk!!

[cfpkiller]

wow i accomplished alot tonite. in 2 hrs i got all this removed. now all i got left is the lower oil pan, gauges, mam midpipe and turbo timeroh and oil pressure line with fitting. note that mass air flow sensor in not included in this kit, it is still on for show to see what it looks like all together.

[Drake13]

dude DON'T SELL IT!

[cfpkiller]

i also forgot to mention that with this downpipe ur gona have to extend both o2 sensors, sorry for not bringing that up, no big deal i just cut 1 wire at a time and got wire 8 inches longer and then move on, sorry aj.

[cfpkiller]

dude DON'T SELL IT!
im sorry bro, bluewater payed 75% already . its his call to give it up. and if he does ur call to come up with cash lol:)

[cfpkiller]

heres a pic with info on parts. and heres my engine bay without turbo:(
not bad turbo kit sold in less than a week.(first)

[cfpkiller]

turbo is all out and ready to go AJ, im gona box it all up and when the rest of the payment is sent its gona be shipped. heres the kit as it sits on my garage floor.

[Drake13]

Don't do it AJ.. you know you want that BIG SCREEN TV instead!!!