m/t drain plug and fill ???

[dupakupa]

This might sound stupid, but with one is the drain and fill plug on m/trans??
The is one big one on the front and one on the back both use (24mm socket)
But the are also 2 (6mm) Allan ones. I want to fill with Royal Purple syntec..
Do I drain the one 24mm one on the back and fill the one on the front….Or do I use the 2 (6mm) one to do it??
Because tranny is made of 2 housings..
(rtfm)

[SicSpeed]

This might sound stupid, but with one is the drain and fill plug on m/trans??
The is one big one on the front and one on the back both use (24mm socket)
But the are also 2 (6mm) Allan ones. I want to fill with Royal Purple syntec..
Do I drain the one 24mm one on the back and fill the one on the front….Or do I use the 2 (6mm) one to do it??
Because tranny is made of 2 housings..
(rtfm)

Its not the ones with the allen keys. Its the big hex ones. The front is fill , the lower one to drain. I dont recommend RP maxgear, i have it in and the factory stuff is better. Try going with redline mt90

[Chris-BE]

I found this somewhere, I forget.


http://i59.photobucket.com/albums/g307/franchizeracing/untitled.jpg

[dupakupa]

I found this somewhere, I forget.


http://i59.photobucket.com/albums/g307/franchizeracing/untitled.jpg


thanks..That’s what I though ...but wasnt sure 100%% since i ve seen those 6mm ones..hehe(hand)