Fog Light Instructions

[h69]

Hi Everyone,

I was wondering if anyone has the factory fog light installation instructions they would like to share. I am interested in installing some fog lights on my Mazda 5 and was wondering how hard is it to do and what I need to make it work. Any advice or information is appreciated.

HT

[Benfolio]

Thank your friendly Mazda Parts Guy! :)

[Jacques]

Hi Everyone,

I was wondering if anyone has the factory fog light installation instructions they would like to share. I am interested in installing some fog lights on my Mazda 5 and was wondering how hard is it to do and what I need to make it work. Any advice or information is appreciated.

HT

Hallo h69,

As a new member of this forum I'm also interested in installing foglights on my MAZDA 5.
Please can you forward any (technical) information how this must be done and what part have to be added on the car?

With kind regards,
Jacques
The Netherlands.

[h69]

Thanks Benfolio,
You are the "Man".

HT

[dfskinner]

thanks for the "how to manual"....... but I believe you can install this without removing the front bumper....... the cover under the front of the car can be removed and the fog light covers will snap out....... I've already taken them out and put them back in without removing the front bumper....... but I'm looking at your comments on the OEM fog lights and I'm thinking of installing some aftermarket fog lights that look OEM.........

[Halo]

For those that have done this:

In the sport, are the wiring harnesses already present behind the front bumper through the firewall etc?

The instructions make it seem as if the harness is already clipped back there waiting to have the lights plugged into them. That seems a bit unusual, but possible I guess if the harnesses are the same for all trim levels as they roll down the assembly line.


-edit:
In fact, the wiring IS back there. It's plugged into a dummy plug on the back of the plastic inserts. Obviously, so is the relay and all the other wiring.

No need to remove the bumper. Just remove 3 philips screws that hold plastic trim on the left and right front of the car behind the bumper. You don't even have to remove said plastic trim, with 3 screws off, you can just bend it back gently. The fogs will fit through that hole. Takes 20 minutes per side TOPS.

[thadon81]

Does anybody have instruction on how to install OEM Fog Light on a 2003 Mazda 6? It would really help me alot.Thanks!

[coolmazda5]

^^ Wrong section, try under the Mazda6 one:

http://www.mazdav.com/forum/forumdisplay.php?f=138