Pics of AEM intake

[hectik1]

AEM intake off of 05 Mazda 6s sold to get the CX7. Cheap, easy, and it sounds good. According to the butt dyno mid and upper rpm power seemed to increase. Throttle reponse has improved also.

Fit is perfect!

http://www.fototime.com/{330EE166-E479-4781-9083-0D0D1B75C09C}/picture.JPG

http://www.fototime.com/{864063F0-32F4-450C-B50B-3D1FD9A6D461}/picture.JPG

[meinp5]

Looks good. Amazing how much they charge for a little piece of metal and a cone filter.

[hectik1]

Looks good. Amazing how much they charge for a little piece of metal and a cone filter.It costs HALF as much as the CPE CAI.(first) Besides that it was free....had it sitting around after the 6 was sold.

[protegeDaryl]

wow.. its soo soo small...

[hectik1]

Couldn't be any bigger. Fits in there perfect now. As you can see, I still have the scoop intact to draw in the cool air.

[protegeDaryl]

looks good.... did you notice any diff in sound on the cx-7?

[hectik1]

looks good.... did you notice any diff in sound on the cx-7?
Finally sounds like a turbo car. You can hear the air being sucked in the intake. The stock BOV is now apparent.

[CJS525]

wow thats awesome.
do you know what the cai part number is? its a lot "more in my price range" than the cp-e intake, but i want to be sure to order the right one.

[hectik1]

wow thats awesome.
do you know what the cai part number is? its a lot "more in my price range" than the cp-e intake, but i want to be sure to order the right one.
http://www.mcx7.com/showthread.php?t=104

Link towards the bottom.

[Byrnie]

you are the man for finding this out :). I <3 short ram intakes :D

[hectik1]

Literally took 10 minutes to install.:)

[CJS525]

thanks for the info! i've never done any engine mods to any cars, and i think this'll be my first! any tips/suggestions would be great.
again, thanks for the info!

[njcx7]

nice, good to know an intake off 05 6 will fit...i think i'd rather have a short intake than a CAI, due to having to worry about a CAI getting water.
so does it really sound nicer...?

[hectik1]

Let me say this....it sounds like a turbo car should sound like.:)

As far as install.....this is straight forward.

[baseballin37]

AEM intake off of 05 Mazda 6s sold to get the CX7. Cheap, easy, and it sounds good. According to the butt dyno mid and upper rpm power seemed to increase. Throttle reponse has improved also.

Fit is perfect!

http://www.fototime.com/{330EE166-E479-4781-9083-0D0D1B75C09C}/picture.JPG

http://www.fototime.com/{864063F0-32F4-450C-B50B-3D1FD9A6D461}/picture.JPG


Ive had my 7 for a few weeks and I just saw your intake. Looks sweet. How is the gas. Ive tried looking for that same intake on AEM and I can find it. Holla back.

[Int3grity]

I would like to see results comparisson withought it and with it on you know to see if it gained anything

[hectik1]

Trying to get to the dyno.(wiggle)

[wongster]

Would this intake work too?
http://cgi.ebay.com/ebaymotors/NEW-Mazda-Intake-Kit-Filter-RX-7-RX-8-FC-FD-CX-7-CX-9_W0QQitemZ200104948042QQihZ010QQcategoryZ38634QQr dZ1QQcmdZViewItem

http://img.auctiva.com/imgdata/2/8/4/2/9/7/webimg/40933393_o.jpg

[StealthWyvern]

It costs HALF as much as the CPE CAI.(first) Besides that it was free....had it sitting around after the 6 was sold.

It wasn't free you just paid for it awhile ago! lol Just bustin your balls man. Looks good btw.

[hectik1]

Would this intake work too?
http://cgi.ebay.com/ebaymotors/NEW-Mazda-Intake-Kit-Filter-RX-7-RX-8-FC-FD-CX-7-CX-9_W0QQitemZ200104948042QQihZ010QQcategoryZ38634QQr dZ1QQcmdZViewItem

http://img.auctiva.com/imgdata/2/8/4/2/9/7/webimg/40933393_o.jpgPlease don't buy that.(boom02)

[StealthWyvern]

Please don't buy that.(boom02)

+1

[jeg0024]

Please don't buy that.(boom02)


What about the asian chick?

[Int3grity]

Lets crack open the fortune cookie

[Killer]

Pass. On both. (rofl2)

[MS6mike]

What about the asian chick?


where can i buy the asian chick? anybody knows please help!(uhm)

[johnson_7773]

AEM intake off of 05 Mazda 6s sold to get the CX7. Cheap, easy, and it sounds good. According to the butt dyno mid and upper rpm power seemed to increase. Throttle reponse has improved also.

Fit is perfect!

http://www.fototime.com/{330EE166-E479-4781-9083-0D0D1B75C09C}/picture.JPG

http://www.fototime.com/{864063F0-32F4-450C-B50B-3D1FD9A6D461}/picture.JPG

just installed AEM intake for 05 Mazda 6s
but there is a small vacuum cap come with the kit, where should I put it?
and after I install the kit, the CEL show up, what should I do?

[erhayes]

My standard CX 7 intake system draws cool air from in-front of the radiator. The picture of the custom system appears to draw hot air from the engine compartment. A'm I missing something ?

[hectik1]

My standard CX 7 intake system draws cool air from in-front of the radiator. The picture of the custom system appears to draw hot air from the engine compartment. A'm I missing something ?There is still cool air coming in from the scoop. The scoop and the lower part of the stock air box is intact.

[wongster]

so were you able to ever get a dyno?

[Brian MP5T]

Cute

[hectik1]

so were you able to ever get a dyno?Well I missed a free dyno....


With us moving into a house, and my daughter's first Bday I have had no time.

I think before I go I might do something with the muffler....(yes)

[wongster]

Well I missed a free dyno....


With us moving into a house, and my daughter's first Bday I have had no time.

I think before I go I might do something with the muffler....(yes)

just installed the aem intake same one as yours this morning.. i can notice the pickup, and i can hear the turbo sound now.. hahaha... but i think i might make a custom heat shield to block the engine heat from the intake.....

[MS6mike]

wow great post pics!

[wongster]

http://photos-c.ak.facebook.com/photos-ak-sctm/v97/79/50/517898213/n517898213_85014_4242.jpg

here ya go

[DeEjAyLiM]

Hey, just wondering if you can take pics inside your engine. I'm trying to figure out how'd you install the whole AEM system. Namely, the support bar for the pipe. I can't figure out a good place to bolt it onto the chassis because the intake tube is crooked when I attached the AEM pipe to it. Did you stretch the intake tube like crazy so that the support bar would bolt on properly?