quater
10-22-2006, 10:36 PM
VF10 good upgrade for GTX about 156-200Eur depends what i can get them for at the time of order
http://www.thepicplace.com/images/quarter/28755819full.jpg
GTX Manifold with EX Wastegate Flange Still working on a price but a rough (very high side) price is 556.859 Eur
length to get the best possible power gains for a good price. Takes a VJ20
These manifolds are not imported they are all hand made in New Zealand with top quality materials
We use heavy walled (2.9mm) stainless steel bends for the best possible strength and durability and all come highly polished unless otherwise arranged
These manifolds are made to order and can take up to two weeks to make
http://www.thepicplace.com/images/quarter/28135074full.jpg
http://www.thepicplace.com/images/quarter/28135063full.jpg
http://www.thepicplace.com/images/quarter/28135044full.jpg
GTX intercoller kit. With what you see
318.205 Euro+ freight
600x300x76 intercooler...
100% Aluminum construction
Fully polished side tanks
End to end: 780mm
Inlet/outlet 75mm (3 inch) O/D
Bar and plate construction
Support: 300-700ps
Compressed air flow rate:572CFM/300HP 858CFM/500HP
Pressure Drop: 1.5~2.5psi@35psi;0.1~0.3psi@15psi
Hot Air Temp: 0~150C
Top pressure: up to 80 psi
INTERCOOLER INCLUDED...
12 month warranty against faulty workmanship
http://www.thepicplace.com/images/quarter/24417433.jpg
http://www.thepicplace.com/images/quarter/19826532.jpg
Please drop me a pm for faster replys
Cheers Dave
http://www.thepicplace.com/images/quarter/28755819full.jpg
GTX Manifold with EX Wastegate Flange Still working on a price but a rough (very high side) price is 556.859 Eur
length to get the best possible power gains for a good price. Takes a VJ20
These manifolds are not imported they are all hand made in New Zealand with top quality materials
We use heavy walled (2.9mm) stainless steel bends for the best possible strength and durability and all come highly polished unless otherwise arranged
These manifolds are made to order and can take up to two weeks to make
http://www.thepicplace.com/images/quarter/28135074full.jpg
http://www.thepicplace.com/images/quarter/28135063full.jpg
http://www.thepicplace.com/images/quarter/28135044full.jpg
GTX intercoller kit. With what you see
318.205 Euro+ freight
600x300x76 intercooler...
100% Aluminum construction
Fully polished side tanks
End to end: 780mm
Inlet/outlet 75mm (3 inch) O/D
Bar and plate construction
Support: 300-700ps
Compressed air flow rate:572CFM/300HP 858CFM/500HP
Pressure Drop: 1.5~2.5psi@35psi;0.1~0.3psi@15psi
Hot Air Temp: 0~150C
Top pressure: up to 80 psi
INTERCOOLER INCLUDED...
12 month warranty against faulty workmanship
http://www.thepicplace.com/images/quarter/24417433.jpg
http://www.thepicplace.com/images/quarter/19826532.jpg
Please drop me a pm for faster replys
Cheers Dave