PDA

View Full Version : Question about splitter support rods


Rob.Tuner
10-20-2006, 09:37 AM
Where would you place them. i have made several crappy mock images of where i would place them, but am trying to get a clean look. i took some ideas from some people and then i made up some of my own from the "standard" locations from other cars and junk.

http://img1.putfile.com/thumb/10/29123284116.jpg (http://www.putfile.com/pic.php?img=3754157)

http://img1.putfile.com/thumb/10/29123284175.jpg (http://www.putfile.com/pic.php?img=3754156)

http://img1.putfile.com/thumb/10/29123284162.jpg (http://www.putfile.com/pic.php?img=3754155)

http://img1.putfile.com/thumb/10/29123284077.jpg (http://www.putfile.com/pic.php?img=3754154)
Pirana
10-20-2006, 10:29 AM
I like the first one.
Rob.Tuner
10-20-2006, 12:30 PM
arite, so i tried the first one, and it doesn't support the splitter that well. only the mid section. so i ended up with this.

http://img1.putfile.com/thumb/10/29210454828.jpg (http://www.putfile.com/pic.php?img=3756496)

http://img1.putfile.com/thumb/10/29210454817.jpg (http://www.putfile.com/pic.php?img=3756495)

http://img1.putfile.com/thumb/10/29210454864.jpg (http://www.putfile.com/pic.php?img=3756494)

and yea, hopefully my front bumper doesn't come flying off at 88mph at which i will end up in the past several years ago.
Pitlab77
10-26-2006, 01:41 AM
question. Why do you even need them?
Aricjm15
10-26-2006, 01:45 AM
question. Why do you even need them?
at anything faster than 40mph the downforce from the lip starts to pull the factory lip off the bumper.
L8R
10-26-2006, 01:47 AM
Looks nice with or without it.
Pitlab77
10-26-2006, 08:34 PM
at anything faster than 40mph the downforce from the lip starts to pull the factory lip off the bumper.

I have a TDR splitter (or had one its in the garage due to CStock) but never seen that happen

even TDR doesnt sell them. I really doubt "normal" speeds pull it down.

www.trackdogracing.com (http://www.trackdogracing.com)
Pitlab77
10-26-2006, 08:37 PM
n/m. I guess it depends on how big the splitter is.
http://www.trackdogracing.com/website/product_photos/radical1.jpg

Mine is the smaller one that does not come with it
justanotheradikt
10-26-2006, 08:40 PM
what did you use as the support bars?