PDA

View Full Version : banjo leak



king air
10-18-2006, 04:27 PM
I am leaking coolant from the front banjo fitting on my turbo, I am unsure if I can get this repaired under warranty so I am wondering if it is a easy fix or should I try for the warranty work.
I am also wondering if this is a common problem, I did search but was unable to find this type of coolant leak.

evilmonkeyMSP
10-18-2006, 04:28 PM
if your warranty is still good...take it in...you wont know unless you try

Yellow MSP
10-18-2006, 08:23 PM
I am leaking coolant from the front banjo fitting on my turbo, I am unsure if I can get this repaired under warranty so I am wondering if it is a easy fix or should I try for the warranty work.
I am also wondering if this is a common problem, I did search but was unable to find this type of coolant leak.

It should have a copper crush washer on there, so tightening it up now will probably not do you much good. You most likely could just unbolt it and put a new washer on there. That's what I would do anyways.