Either of these two possible?

[B1GHAM]

well I had 2 thoughts for my car that Im going to seriously start researching now.

ONE (and probably the easiest)

I want to change my passenger window switch on the drivers console to auto down. Im soo used to having a car with auto fronts and auto driver only is kind of annoying. I figured it should be as simple as replacing the switch with another auto? or is there anything that Im missing?

TWO

I want to do one of 2 things IF possible. I was thinking about switch my key/fob over to a new flip-key design on the current mazda 6/rx8/cx7/ etc. Now the one big issue is getting the current flip-key circuitry to work with my MSP alarm. I was hoping its just a frequency change but Im curious to know if anyone else knows if I would need to do anything else... otherwise I was thinking about just changing the key to the standard mazda3 design.

both the flip-key and the auto front windows were features on my old jetta. I can live without them but if there is any feasible/reasonably priced way to do either of the above listed I definately want those features back

[GhostMercury]

im subbin cause i would like to know this stuff too

[orng1]

Just reading through this, I have the 1 touch windows at the drivers switch. My friend installed an alarm for me with remote start and windows up and down, from the remote I can start the car and the windows will go up as the car starts. I can roll them down to hear the music. Just need to wire in a relay, I bought it at a sound shop that does alarms.

[B1GHAM]

hmmm.... looks like no answers yet.... I might be having to try this out and just seeing if it will work..

[orng1]

The key thing? I don't know anyone that has tried it.

[B1GHAM]

well Im almost 100% positive that I could get the window switches to work with very little work.... the key IS what Im worried about a little bit...

[GhostMercury]

bringing this back to life cause i want a flip key