passenger side axle

[OneQuikMSP]

Kinda having a problem getting the passenger side axle out, How does it come out? I'm taken the drivers side one out but the passenger appears to be different.

[MSP Pro]

Don't know if you've solved this yet, but theres a center bearing for the passenger side that is attached to the engine block with 3 bolts. Take them out and the axle can be removed from the transmission. If you need the axle to retract some more to clear the transmission, you can take out the top bolt of the two holding the wheel hub in the MacPherson strut (remove the brake line clip and get the brake line out of the way first) and tilt the hub and rotor down. Now grab the center axle and pull it towards you to get another inch of clearance at the transmission.

See Turfburn's How To remove the transmission and replace the lsd for more detailed instructions (with pics!).

[OneQuikMSP]

Thank you!