GHL, HiBoost, Unichip For SALE!!!

[PlatinumMSP]

EVERYTHING IS SOLD!!! Injen CAI and Greddy Type RS Up for Sale Soon!!!


Buy some the of the best mods ever made for your MSP here! Each one of these added HUGE gains. All parts are in perfect condition and you will love them right out of the box. All prices include shipping and paypal fees.

First up...

GHL Turboback Exhaust - $900 SOLD
The best exhaust ever made for the MSP. True 3" turboback stainless steel, comes with a flex pipe and a hi-flow catalytic converter. The power and torque gain is tremendous throughout the entire rpm range and sound is just pure bliss. GHL also provides a lifetime warrenty on all its products.


MSP HiBoost FMIC Kit w/ MAF Relocation and Greddy BOV Flange - $600SOLD
The most popular fmic kit on the market. Massive gains and efficiency. I gained +2 psi from bolting on this kit and heat soak was completely eliminated. You cant beat the looks either, its just bad ass. Requires no cutting of the frame. Comes with everything needed for MAF Relocation and a Greddy BOV flange that will fit a Greddy Type S or Type RS Blow off Valve. I had no stalling problems ever with this kit.

Unichip Plug and Play EMS (Almost Brand NEW!) - $650 SOLD!
The best Piggyback EMS on the market. I only had the Unichip plugged in for 4 days, the boost controller and switches were never hooked up. The warrenty card was never filled out and will be included. Gains are just awesome right out of the box. It plugs directly into your ecu harness and does not require any splicing. It comes loaded with the base map which will not only increase smoothness and drivability but it will also increase fuel economy!

[Bala]

Buy some the of the best mods ever made for your MSP here! Each one of these added HUGE gains. All parts are in perfect condition and you will love them right out of the box. All prices include shipping and paypal fees.

First up...

GHL Turboback Exhaust - $900
The best exhaust ever made for the MSP. True 3" turboback stainless steel, comes with a flex pipe and a hi-flow catalytic converter. The power and torque gain is tremendous throughout the entire rpm range and sound is just pure bliss. GHL also provides a lifetime warrenty on all its products.


MSP HiBoost FMIC Kit w/ MAF Relocation and Greddy BOV Flange - $600
The most popular fmic kit on the market. Massive gains and efficiency. I gained +2 psi from bolting on this kit and heat soak was completely eliminated. You cant beat the looks either, its just bad ass. Requires no cutting of the frame. Comes with everything needed for MAF Relocation and a Greddy BOV flange that will fit a Greddy Type S or Type RS Blow off Valve. I had no stalling problems ever with this kit.

Unichip Plug and Play EMS (Almost Brand NEW!) - $650
The best Piggyback EMS on the market. I only had the Unichip plugged in for 4 days, the boost controller and switches were never hooked up. The warrenty card was never filled out and will be included. Gains are just awesome right out of the box. It plugs directly into your ecu harness and does not require any splicing. It comes loaded with the base map which will not only increase smoothness and drivability but it will also increase fuel economy!
pm sent

[yashart_mp3]

does the GHL have an extra 02 bung in it?

[Pyr0TeK]

Damn I want that FMIC... take payments? (flash)

[kickerMSP]

ya, take payments on the UC or FMIC????

[PlatinumMSP]

paypal or cash only, full amount required, if you dont have the money now, just put it on the credit card, i'm heading out of town for 2 days, i'll be back friday, you guys have your offers pm'd to me before I come back, first come first serve, money talks and dibs dosnt do shit, thanks everyone

[PlatinumMSP]

no it dosnt have an extra o2 bung, you dont need it for anything, the car dosnt throw a CEL with the exhaust because it has a hi-flow cat and the stock o2 plugs right in

[yashart_mp3]

no it dosnt have an extra o2 bung, you dont need it for anything, the car dosnt throw a CEL with the exhaust because it has a hi-flow cat and the stock o2 plugs right in


i need one for my wideband...

[Rnajera]

bump for a great seller.

[Black_Protege_5]

You can just weld a bung on there for an O2 sensor. Not hard.

[PlatinumMSP]

i'm back in town

[redlightgo]

If I picked up the exhaust as my next mod would it bogg the engine down with a lak of back pressure if I did not have any other mods besids a CAI?

[Pyr0TeK]

I am running the full 3" turboback GHL system with a Injen CAI and I have no issies... she is quick... I piad $1150 for my GHL... lifetime warranty. There is no better exhaust for the MSP... no matter what anyone else says...

If I picked up the exhaust as my next mod would it bogg the engine down with a lak of back pressure if I did not have any other mods besids a CAI?

[ChopstickHero]

If I picked up the exhaust as my next mod would it bogg the engine down with a lak of back pressure if I did not have any other mods besids a CAI?

turbocars work best with less back pressure because it allows the turbo to spool up faster.

[Pyr0TeK]

(werd)

turbocars work best with less back pressure because it allows the turbo to spool up faster.

[PlatinumMSP]

If I picked up the exhaust as my next mod would it bogg the engine down with a lak of back pressure if I did not have any other mods besids a CAI?

nope... your car will run like a dream man. Turbo cars run much much better with no back pressure. The exhaust is my favorite and most noticeable mod that I ever bought for my car.

[Pyr0TeK]

bump bump bump... I totally agree... and other locals that know my car... (first)

nope... your car will run like a dream man. Turbo cars run much much better with no back pressure. The exhaust is my favorite and most noticeable mod that I ever bought for my car.

[PlatinumMSP]

I am running the full 3" turboback GHL system with a Injen CAI and I have no issies... she is quick... I piad $1150 for my GHL... lifetime warranty. There is no better exhaust for the MSP... no matter what anyone else says...

you should pick up my fmic man, with the setup you have you'll have insane gains like i did, With my car I was spinning 3rd gear I had so much power and torque.

[Pyr0TeK]

In case you didn't know.... I F'N WANT IT!.... the problem comes in when I pull my wallet out of my back pocket... there is a hole in it and I can't even afford to get a new wallet without holes!

Son is back in school (good local private school) so my funds are done for a while... I wish someone would ship me a fuckin FMIC and let me pay them $100/month ... but noone will so I stopped trying... sucks for me... such is life... (flash)

you should pick up my fmic man, with the setup you have you'll have insane gains like i did, With my car I was spinning 3rd gear I had so much power and torque.

[PlatinumMSP]

In case you didn't know.... I F'N WANT IT!.... the problem comes in when I pull my wallet out of my back pocket... there is a hole in it and I can't even afford to get a new wallet without holes!

Son is back in school (good local private school) so my funds are done for a while... I wish someone would ship me a fuckin FMIC and let me pay them $100/month ... but noone will so I stopped trying... sucks for me... such is life... (flash)

Just so you know man, I'm still in school and I payed for all my mods with my student loans. So if you want something bad enough, you can always have it.

[Pyr0TeK]

Not an option for me. My son is 8. No student loan options for another decade or so. No biggy, love my car anyway.

Just so you know man, I'm still in school and I payed for all my mods with my student loans. So if you want something bad enough, you can always have it.

[PlatinumMSP]

Not an option for me. My son is 8. No student loan options for another decade or so. No biggy, love my car anyway.

Its all good man, you'll have your time, everyone who wants it does.

[PlatinumMSP]

bump, the GHL and HiBoost are still for sale, I also have an Injen CAI going up for sale for $150, I still need to snap some pics

[jmv]

drool and bump for a sweet exhuast.

[PlatinumMSP]

all items sold!!!! I have a Greddy Type RS (needs a replacement ajustment screw) ($100) that will be on sale soon and an Injen Cai for $150, i'll start a new thread for them when I have pictures.