gonna need some parts shortly....

[boostdprotegelx]

well i just picked up a MSP front/rear/sides... the rear fit fine. the front and sides, clearly haven't yet. well first off.. here's what I'll need in the motor area

Alternator bolts
Intake Manifold bolts
exhaust manifold bolts

new timing/alternator belts

trunk light covers
trunk keyhole


MSP front conversion parts..
-bumper bar
-fender wells
w/e else.

also, i'll need random clips for the interior parts. and the front/rear bolts/clips to put on the body.

let me know if you have any idea what I'm talking about. and how much this stuff will cost. thanks.

[bagman1]

well i just picked up a MSP front/rear/sides... the rear fit fine. the front and sides, clearly haven't yet. well first off.. here's what I'll need in the motor area

Alternator bolts
Intake Manifold bolts
exhaust manifold bolts

new timing/alternator belts

trunk light covers
trunk keyhole


MSP front conversion parts..
-bumper bar
-fender wells
w/e else.

also, i'll need random clips for the interior parts. and the front/rear bolts/clips to put on the body.

let me know if you have any idea what I'm talking about. and how much this stuff will cost. thanks.

Sorry for the delay in response.

Alternator bolts
997241000 MSRP-2.00 Website-1.60
997940840 MSRP-2.95 Website-2.36
997961020 MSRP-3.20 Website-2.56
997950880 MSRP-3.20 Website-2.56
FP0118363 MSRP-8.70 Website-6.96 This is the adjusting block

Intake bolts
9YA020802 MSRP-3.00ea Website-2.40ea (need 5)

Exhaust bolts
9YA010801 MSRP-3.00ea Website-2.40ea (need 8)

T-belt
FSY112205 MSRP-48.60 Website-38.88

Alt belt and PS/AC belt
FS1218381A MSRP-15.45 Website-12.36
FS1215909A MSRP-23.10 Website-18.48

Trunk light cover- I am assuming the cover for the lamp in the trunk.
B10051441 MSRP-5.35 Website-4.28

Trunk keyhole---?????? Are you talking about the the little door flap on the cylinder?

Front reinforcement
BP7H50070 MSRP-394.85 Website-315.88 If I am not mistaken though the front reinforcement for the P5 will also work for this conversion and it is a lot cheaper, BN7H50070A MSRP-247.11 Website-197.69. Someone please correct me if I am wrong on this one just don't jump down my throat about it.:)

Fender liners
RT B30P56130A MSRP-80.55 Website-64.44
LT B30P56140A MSRP-80.55 Website-64.44
Fasteners- BC1D56145 MSRP-1.10ea Website-.88ea (23 in all)

Interrior trim fasteners
B46768AC302 MSRP-1.50ea Website-1.20ea (25)
GJ2168885B02 MSRP-1.20ea Website-.96ea (8)

Front and rear hardware?????
Are we talking everything to hang the fron and rear covers?

JMBAggie

[boostdprotegelx]

Sorry for the delay in response.

Alternator bolts
997241000 MSRP-2.00 Website-1.60
997940840 MSRP-2.95 Website-2.36
997961020 MSRP-3.20 Website-2.56
997950880 MSRP-3.20 Website-2.56
FP0118363 MSRP-8.70 Website-6.96 This is the adjusting block

Intake bolts
9YA020802 MSRP-3.00ea Website-2.40ea (need 5)

Exhaust bolts
9YA010801 MSRP-3.00ea Website-2.40ea (need 8)

T-belt
FSY112205 MSRP-48.60 Website-38.88

Alt belt and PS/AC belt
FS1218381A MSRP-15.45 Website-12.36
FS1215909A MSRP-23.10 Website-18.48

Trunk light cover- I am assuming the cover for the lamp in the trunk.
B10051441 MSRP-5.35 Website-4.28

Trunk keyhole---?????? Are you talking about the the little door flap on the cylinder?

Front reinforcement
BP7H50070 MSRP-394.85 Website-315.88 If I am not mistaken though the front reinforcement for the P5 will also work for this conversion and it is a lot cheaper, BN7H50070A MSRP-247.11 Website-197.69. Someone please correct me if I am wrong on this one just don't jump down my throat about it.:)

Fender liners
RT B30P56130A MSRP-80.55 Website-64.44
LT B30P56140A MSRP-80.55 Website-64.44
Fasteners- BC1D56145 MSRP-1.10ea Website-.88ea (23 in all)

Interrior trim fasteners
B46768AC302 MSRP-1.50ea Website-1.20ea (25)
GJ2168885B02 MSRP-1.20ea Website-.96ea (8)

Front and rear hardware?????
Are we talking everything to hang the fron and rear covers?

JMBAggie


wow..you're the man. and with the front and rear hardware, yes i am. because i'm sick of using bolts I find..due to all of the different places my car has been, we've lost some bolts and what not. i figured it best just to get a bunch new.If the protege 5 will fit, i'd rather that one i believe.. what's the difference? also, do you know what modifications will be needed to make it fit? or will it bolt up to the same bolts as my stock LX?

also, with the trunk, i meant the actual pieces of plastic that you put the BULBs for the trunk lisence plate into.

[bagman1]

wow..you're the man. and with the front and rear hardware, yes i am. because i'm sick of using bolts I find..due to all of the different places my car has been, we've lost some bolts and what not. i figured it best just to get a bunch new.If the protege 5 will fit, i'd rather that one i believe.. what's the difference? also, do you know what modifications will be needed to make it fit? or will it bolt up to the same bolts as my stock LX?

also, with the trunk, i meant the actual pieces of plastic that you put the BULBs for the trunk lisence plate into.

Give me a little time on the front reinforcements and front and rear cover hardware and I will get back to you it may be in the morning before I can answer these questions.

JMBaggie

[bagman1]

Give me a little time on the front reinforcements and front and rear cover hardware and I will get back to you it may be in the morning before I can answer these questions.

JMBaggie


As far as I can see the reinforcements should be a direct swap. The only thing that I can think is different is possibly the weight between the two of them, someone please correct me if I am wrong on this but I believe that I am correct.

As for the mounting hardware:

Front items have a website price of 17.92.
B30D500Z5---2EA
B45556135---4EA
9CS600520---4EA
998650516---2EA
9YA590602A---2EA
9YB310603---2EA

Rear items have a website price of 27.12
9CF600516B---4EA
999100501---4EA
BC1M500Z5---2EA
9CS600520---2EA
9YA010502---2EA
GD7A50EA1---2EA
BF6750033---2EA
9YAB40601---2EA

I hopr this helps,
JMBaggie

[boostdprotegelx]

As far as I can see the reinforcements should be a direct swap. The only thing that I can think is different is possibly the weight between the two of them, someone please correct me if I am wrong on this but I believe that I am correct.

As for the mounting hardware:

Front items have a website price of 17.92.
B30D500Z5---2EA
B45556135---4EA
9CS600520---4EA
998650516---2EA
9YA590602A---2EA
9YB310603---2EA

Rear items have a website price of 27.12
9CF600516B---4EA
999100501---4EA
BC1M500Z5---2EA
9CS600520---2EA
9YA010502---2EA
GD7A50EA1---2EA
BF6750033---2EA
9YAB40601---2EA

I hopr this helps,
JMBaggie


awesome man. this definatly helps. i will most definatly come to you when i get the cash for this stuff. and, i'll prolly go with the MP5 reinforcement bar if it'll work...anything on the trunk lights? the holder things?


and btw, D-rock240 is the one that signed me on to you..soo maybe you wanna hook him up next time:)

[bagman1]

awesome man. this definatly helps. i will most definatly come to you when i get the cash for this stuff. and, i'll prolly go with the MP5 reinforcement bar if it'll work...anything on the trunk lights? the holder things?


and btw, D-rock240 is the one that signed me on to you..soo maybe you wanna hook him up next time:)

Sorry I forgot about those
Part# NA0151270B MSRP-45.80ea Website-36.64ea

JMBaggie

[boostdprotegelx]

Sorry I forgot about those
Part# NA0151270B MSRP-45.80ea Website-36.64ea

JMBaggie
really? HOLY CRAP..why are they so expensive..lol. it's just 2 small square pieces of plastic

[bagman1]

really? HOLY CRAP..why are they so expensive..lol. it's just 2 small square pieces of plastic

As for the reason they are so expensive.... I could come up with a real smart assed thing to say but I don't want to offend anybody.:)

I really don't know why....
JMBaggie

[boostdprotegelx]

As for the reason they are so expensive.... I could come up with a real smart assed thing to say but I don't want to offend anybody.:)

I really don't know why....
JMBaggie
bahahaha. it's all good man. thanks. i appreciate your help. i'll get back to you asap w/ money and stuff. thanks again.

[boostdprotegelx]

bahahaha. it's all good man. thanks. i appreciate your help. i'll get back to you asap w/ money and stuff. thanks again.
OH YEAH...drivers side front, brake dust shield...i think is what it is..got completely fucked up and ripped off somehow...

[bagman1]

OH YEAH...drivers side front, brake dust shield...i think is what it is..got completely fucked up and ripped off somehow...

Part# B25D33271 MSRP-8.20 Website-6.56

JMBaggie

[boostdprotegelx]

oh yeah, and i'll need the parts that hold the console in.. there are 2 brackets that attach to the floor, well someone took them out during my stripping of the car..so i'll need both the front and rear. thanks man.

[bagman1]

oh yeah, and i'll need the parts that hold the console in.. there are 2 brackets that attach to the floor, well someone took them out during my stripping of the car..so i'll need both the front and rear. thanks man.

Front bracket
B30D64416 MSRP-4.85 Website-3.88
Rear bracket
GE4T64436 MSRP-2.25 Website-1.80

JMBaggie

[D-rock240]

awesome man. this definatly helps. i will most definatly come to you when i get the cash for this stuff. and, i'll prolly go with the MP5 reinforcement bar if it'll work...anything on the trunk lights? the holder things?


and btw, D-rock240 is the one that signed me on to you..soo maybe you wanna hook him up next time:)

Thanks boostd :)

The reinforcement that I got was the BN7H-50-070A and as you can see it fits fine.

[bagman1]

Thanks boostd :)

The reinforcement that I got was the BN7H-50-070A and as you can see it fits fine.

Thanks for the assist to my memory on this one.

JMBaggie

[boostdprotegelx]

Thanks for the assist to my memory on this one.

JMBaggie
not to be a bother, but can you get me a picture of the msp bumper bar?

[bagman1]

not to be a bother, but can you get me a picture of the msp bumper bar?

Here you go.
Protege reinforcement
http://i87.photobucket.com/albums/k129/mazdapart/PROREIN.jpg

P5/MP3/MSP reinforcement
http://i6.tinypic.com/29yh008.jpg

JMBaggie

[boostdprotegelx]

well then..what is this?

[bagman1]

well then..what is this?

That looks like the one for the P5/MP3/MSP.

JMBaggie

[D-rock240]

Thanks for the assist to my memory on this one.

JMBaggie

NP Jason ;)

Here's a pic of the reinforcement I got:

[boostdprotegelx]

NP Jason ;)

Here's a pic of the reinforcement I got:
hmm..ok do i need the bumper bar, and the reinforcement?

[bagman1]

hmm..ok do i need the bumper bar, and the reinforcement?

I believe we are talking about the same part just calling it by different names.

JMBaggie

[boostdprotegelx]

need...prices again...p5 antenna, and wiring for antenna to front.


and i need, interior pieces for the msp. ...all plastic panels.

[bagman1]

need...prices again...p5 antenna, and wiring for antenna to front.


and i need, interior pieces for the msp. ...all plastic panels.

Take a look at the picture below and parts list to see which parts you will need.

http://i87.photobucket.com/albums/k129/mazdapart/P5ANTENNA.jpg

66-935 #1
BN5V66940A MSRP-76.95 Website-61.56
66-935 #2
BN5W66940 MSRP-40.35 Website-32.28
66-930 #1
B25H66930B MSRP-45.35 Website-36.28
66-930 #2
B25T66930 MSRP-41.30 Website-33.04

As for the interior pieces are you talking about all the plastic trim that is off-Black?

JMBaggie

[boostdprotegelx]

Take a look at the picture below and parts list to see which parts you will need.

http://i87.photobucket.com/albums/k129/mazdapart/P5ANTENNA.jpg

66-935 #1
BN5V66940A MSRP-76.95 Website-61.56
66-935 #2
BN5W66940 MSRP-40.35 Website-32.28
66-930 #1
B25H66930B MSRP-45.35 Website-36.28
66-930 #2
B25T66930 MSRP-41.30 Website-33.04

As for the interior pieces are you talking about all the plastic trim that is off-Black?

JMBaggie


awesome about the wiring..a nd interior pieces..the msp black...i have a black console..so i'd like to match it up w/ black door panels and interior trim.

oh yeah, and POSSIBLY SOME MSP CARPET, and a MSP headliner. that will match these. the color i'm referring to is attached.you can barely see it. but you get the idea i presume.

[bagman1]

awesome about the wiring..a nd interior pieces..the msp black...i have a black console..so i'd like to match it up w/ black door panels and interior trim.

oh yeah, and POSSIBLY SOME MSP CARPET, and a MSP headliner. that will match these. the color i'm referring to is attached.you can barely see it. but you get the idea i presume.

Give me a little time. I will post the part#'s pictures and Pricing later today.

JMBaggie

[boostdprotegelx]

Give me a little time. I will post the part#'s pictures and Pricing later today.

JMBaggie
sounds good. you sir, are the man. i will purchase all of this from you...well all that i can, to make your time worth while.

[boostdprotegelx]

do you have any idea if you can get a resistor of some sort for the air bag module? i don't want the light to be taken out. and i don't want it winking at me. i just want it done the right way...

[boostdprotegelx]

do you have any idea if you can get a resistor of some sort for the air bag module? i don't want the light to be taken out. and i don't want it winking at me. i just want it done the right way...
oh yeah, i'll need the msp pedals and dead pedal....pirana has these...

[bagman1]

oh yeah, i'll need the msp pedals and dead pedal....pirana has these...


As for the air bag resistor, I do not know of anything. I will add the dead pedals into the pricing.

JMBaggie

[boostdprotegelx]

As for the air bag resistor, I do not know of anything. I will add the dead pedals into the pricing.

JMBaggie
awesome.and you ...if you wanna..can give me an "i'm ordering to much shit to pay for, but here's savings for you" discount...or something:)(peep)

[bagman1]

awesome.and you ...if you wanna..can give me an "i'm ordering to much shit to pay for, but here's savings for you" discount...or something:)(peep)

Here goes the lists:

Lower B-pillars
RT side B30D6622065 40.40/32.32
LT side B30D6823065 40.40/32.32

Scuff and kick panels:

http://i87.photobucket.com/albums/k129/mazdapart/PROTEGESCUFF.jpg

68-230
BL8E683A0A65 210.80/168.64
68-761
B25D68760B65 34.70/27.76
68-761Z
B25D68770B65 34.70/27.76
68-716
B25F68730A65 10.25/8.20
68-716Z
B25F68740A65 10.25/8.20
68-711
BP7H68710A65 98.55/78.84
68-711Z
BP7H68720A65 98.55/78.84
68-371
BJ0E6837065 13.75/11.00
68-371Z
BJ0E6839065 16.85/13.48

All the part#'s above are for picture above them.

Door panels
Rt Front- BN5V68420B65 418.35/334.68
pull handle- B25D68D61C65 33.45/26.76
Lt Front- BL8G68450B65 457.48/365.98
pull handle- BJ0E68D81B65 33.45/26.76
Rt Rear- B30J6852065 347.75/278.20
pull handle- 30.10/24.08
Lt Rear- B30J6855065 347.75/278.20
pull handle- 30.10/24.08

Center audio surround
BP6B5521025 324.85/259.88

Total for all parts listed 2592.08/2073.66 Depending on what is ordered is depending on what additional help I can give on pricing. If you where to order everything at 1 time I would sell the whole lot of it for 1900.00 shipped.

JMBaggie

[Kansei]

WOW that is a lot of parts. I don't even want to know how much it would cost at the local dealership.. plus they'd want you to know the part numbers

[bagman1]

WOW that is a lot of parts. I don't even want to know how much it would cost at the local dealership.. plus they'd want you to know the part numbers

Actually I think I might have left something out but I will leave it to you guys to let me know that.

JMBaggie

[boostdprotegelx]

Here goes the lists:

Lower B-pillars
RT side B30D6622065 40.40/32.32
LT side B30D6823065 40.40/32.32

Scuff and kick panels:

http://i87.photobucket.com/albums/k129/mazdapart/PROTEGESCUFF.jpg

68-230
BL8E683A0A65 210.80/168.64
68-761
B25D68760B65 34.70/27.76
68-761Z
B25D68770B65 34.70/27.76
68-716
B25F68730A65 10.25/8.20
68-716Z
B25F68740A65 10.25/8.20
68-711
BP7H68710A65 98.55/78.84
68-711Z
BP7H68720A65 98.55/78.84
68-371
BJ0E6837065 13.75/11.00
68-371Z
BJ0E6839065 16.85/13.48

All the part#'s above are for picture above them.

Door panels
Rt Front- BN5V68420B65 418.35/334.68
pull handle- B25D68D61C65 33.45/26.76
Lt Front- BL8G68450B65 457.48/365.98
pull handle- BJ0E68D81B65 33.45/26.76
Rt Rear- B30J6852065 347.75/278.20
pull handle- 30.10/24.08
Lt Rear- B30J6855065 347.75/278.20
pull handle- 30.10/24.08

Center audio surround
BP6B5521025 324.85/259.88

Total for all parts listed 2592.08/2073.66 Depending on what is ordered is depending on what additional help I can give on pricing. If you where to order everything at 1 time I would sell the whole lot of it for 1900.00 shipped.

JMBaggie


does that include the belts/bolts etc. i priced up earlier. MINUS the bumper bar/support?

[bagman1]

does that include the belts/bolts etc. i priced up earlier. MINUS the bumper bar/support?

No the price quoted is just for the interior items the other items would be additional.

JMBaggie

[boostdprotegelx]

does that include the belts/bolts etc. i priced up earlier. MINUS the bumper bar/support?
ok so..1900.00..and around 300.00 for the other stuff...and this is all the msp stuff? w/ the black?

[bagman1]

ok so..1900.00..and around 300.00 for the other stuff...and this is all the msp stuff? w/ the black?

That is correct.


Sorry for the delay in response I got busy as hell.


JMBaggie

[Kansei]

Is this the largest order someone from this site has ever placed? It's gotta be close to it at least. crazy.

[boostdprotegelx]

That is correct.


Sorry for the delay in response I got busy as hell.


JMBaggie
glad to hear it. works for me.

[D-rock240]

Go Damian! Do I get anything since I referred him? ;)

I may need a tan 3rd brake light housing. One of the plastic tabs broke off and it rattles when the system is on.

Also, can you price out the black rubber stripping that lines the inside of the drivers door? I'll try and take a pic tonight of what I mean.

[bagman1]

Is this the largest order someone from this site has ever placed? It's gotta be close to it at least. crazy.

When it comes through yes it will be the largest to date from this site.

JMBaggie

[bagman1]

Go Damian! Do I get anything since I referred him? ;)

I may need a tan 3rd brake light housing. One of the plastic tabs broke off and it rattles when the system is on.

Also, can you price out the black rubber stripping that lines the inside of the drivers door? I'll try and take a pic tonight of what I mean.

3rd brake light:
B25D51580A80 MSRP-72.30 Website-57.84
Seaming welt
BJ0E6891280 MSRP-22.25 Website-17.80

I would have to order them.

JMBaggie

[boostdprotegelx]

good. well to add to that list. i'll need the under fender splash guards, and msp fenders. and all the under the motor guards.. along w/ the clips to all the parts i want. if they aren't already involved in the price. thanks.

[bagman1]

good. well to add to that list. i'll need the under fender splash guards, and msp fenders. and all the under the motor guards.. along w/ the clips to all the parts i want. if they aren't already involved in the price. thanks.

Total for these items 696.38 / 557.10. When you are ready to order all this stuff just give me a call.


JMBaggie

[boostdprotegelx]

Total for these items 696.38 / 557.10. When you are ready to order all this stuff just give me a call.


JMBaggie
thanks. when placing this order..what do i need to have ready? and can i paypal pay? or what's the deal?

[bagman1]

thanks. when placing this order..what do i need to have ready? and can i paypal pay? or what's the deal?

When you call me just have the CC info and shipping address I will take care of the rest.

JMBaggie

[boostdprotegelx]

alright. one last thing. i think. the passenger side MM BAR..connects to the frame of the engine bay i think. guess it's for extra support.

is there any way you could(doesn't matter how long it takes) put the full list together of all I'm ordering, so we can get it straight?


also, just to give yous ome kind of idea. I'll be placing the actual order after I close on my condo on the 16th. so, take a week from that date..that's probably when it'll happen. thanks for your time.

also, how long will shipping take? to MD 21102

[bagman1]

alright. one last thing. i think. the passenger side MM BAR..connects to the frame of the engine bay i think. guess it's for extra support.

is there any way you could(doesn't matter how long it takes) put the full list together of all I'm ordering, so we can get it straight?


also, just to give yous ome kind of idea. I'll be placing the actual order after I close on my condo on the 16th. so, take a week from that date..that's probably when it'll happen. thanks for your time.

also, how long will shipping take? to MD 21102

"MM BAR" stands for?

Shipping will be 2-3 days at the most to MD.

I will work on the list and PM it to you. Do you have MS EXCEL?

JMBaggie

[boostdprotegelx]

"MM BAR" stands for?

Shipping will be 2-3 days at the most to MD.

I will work on the list and PM it to you. Do you have MS EXCEL?

JMBaggie
yes i do. and passenger motor mount. i guess it connects to the top of the motor mount, and also to the body of the car(in the engine bay)

[bagman1]

yes i do. and passenger motor mount. i guess it connects to the top of the motor mount, and also to the body of the car(in the engine bay)

PM me your e-mail address and when I get done with the list I will e-mail you the list in excel format.

For the mount take a look at this picture and tell me which one you are looking for.

http://i87.photobucket.com/albums/k129/mazdapart/PROTEGE2.jpg

JMBaggie

[boostdprotegelx]

PM me your e-mail address and when I get done with the list I will e-mail you the list in excel format.

For the mount take a look at this picture and tell me which one you are looking for.

http://i87.photobucket.com/albums/k129/mazdapart/PROTEGE2.jpg

JMBaggie
my e-mail is open to everyone lol. Boostdprotegelx@hotmail.com

and if you would, make sure you include the bolts/belts/ ETC..basically EVERYTHING that we've spoke about up till now. i would GREATLY appreciate it. thanks a lot.

also, i attached a picture to what i was talking about.looks like 39-0A1

i'll need the bolts also. thanks.!!!

[bagman1]

my e-mail is open to everyone lol. Boostdprotegelx@hotmail.com

and if you would, make sure you include the bolts/belts/ ETC..basically EVERYTHING that we've spoke about up till now. i would GREATLY appreciate it. thanks a lot.

also, i attached a picture to what i was talking about.looks like 39-0A1

i'll need the bolts also. thanks.!!!

That is part# B26K390A1 MSRP-2.85 Website-2.28

I will add this to the list.

I will email you the list any and all pictures.

This will take me some time to compile so please bear with me. At the worst you will get this info on Monday.

JMBaggie

[boostdprotegelx]

That is part# B26K390A1 MSRP-2.85 Website-2.28

I will add this to the list.

I will email you the list any and all pictures.

This will take me some time to compile so please bear with me. At the worst you will get this info on Monday.

JMBaggie
I'm gonna bear with you. you're doing me a great service. thank you very much. can't wait to get all of it. and, it's all ready to go when ordered? i"m excited.

[bagman1]

I'm gonna bear with you. you're doing me a great service. thank you very much. can't wait to get all of it. and, it's all ready to go when ordered? i"m excited.

Once you place the order I will have to order a majority of the items so figure 2-3 days to me then 2-3 days to you. So worst case will be a 1 week turn.

JMBaggie

[boostdprotegelx]

sounds great. thanks.

[boostdprotegelx]

sounds great. thanks.
loooking at today for an e-mail possibly? btw, did you have carpet, and headliner in that?

[bagman1]

loooking at today for an e-mail possibly? btw, did you have carpet, and headliner in that?

You will have the list today.

I will add them to the list.

JMBaggie

[boostdprotegelx]

You will have the list today.

I will add them to the list.

JMBaggie
w/ the interior parts, this includes ALL of the clips and what not to put the parts on the car correct?

[bagman1]

w/ the interior parts, this includes ALL of the clips and what not to put the parts on the car correct?

That is correct.

The parts list that you will get from me will be all the parts that you will need. If you need anything that does not come as part of an asy. it will be listed also.

JMBaggie

[boostdprotegelx]

That is correct.

The parts list that you will get from me will be all the parts that you will need. If you need anything that does not come as part of an asy. it will be listed also.

JMBaggie
very well sir.

[Kansei]

I'm pretty sure when you get the parts in you'll be able to build a full new car with them :P

[boostdprotegelx]

I'm pretty sure when you get the parts in you'll be able to build a full new car with them :P
that's kind of what i'm going for.:)

[D-rock240]

You pretty much need to, interior wise. Those shops really tortured your car :(

[boostdprotegelx]

ahem...need something else...

all the clips for the msp side skirts, both sides. added. please.

[bagman1]

ahem...need something else...

all the clips for the msp side skirts, both sides. added. please.

I will send you a new list with them added at the bottom.

JMBaggie

[boostdprotegelx]

I will send you a new list with them added at the bottom.

JMBaggie
more adding at the bottom, if you don't mind... all 4 doors weather seals.(black rubber pieces go aroudn the door to keep cold out) trunk too.

[bagman1]

more adding at the bottom, if you don't mind... all 4 doors weather seals.(black rubber pieces go aroudn the door to keep cold out) trunk too.

I'll get it to you shortly.

JMBaggie

[boostdprotegelx]

I'll get it to you shortly.

JMBaggie
grrrr...as i tried putting on the greasable bushings and collar clamps for my AXR clunk fix, the sway wouldn't fit on stock lx rear cross member...sooo. i need the msp setup..... also, i'm going to need the wiriring harness/trunk latch for a msp. so, if you could..add these..thanks. and i guess if i'm gonna do it. price up the front msp cross section for me. thanks.

[bagman1]

grrrr...as i tried putting on the greasable bushings and collar clamps for my AXR clunk fix, the sway wouldn't fit on stock lx rear cross member...sooo. i need the msp setup..... also, i'm going to need the wiriring harness/trunk latch for a msp. so, if you could..add these..thanks. and i guess if i'm gonna do it. price up the front msp cross section for me. thanks.

Front MSP cross section?

I will get you a list with the others added to the bottom.

JMBaggie

[boostdprotegelx]

Front MSP cross section?

I will get you a list with the others added to the bottom.

JMBaggie
isn't the msp cross member(subframe) different? i think that's what i meant. the msp subframe..front/rear.

[bagman1]

isn't the msp cross member(subframe) different? i think that's what i meant. the msp subframe..front/rear.

Yes you are correct it is. I will get you an updated list very shortly.

JMBaggie

[boostdprotegelx]

Yes you are correct it is. I will get you an updated list very shortly.

JMBaggie
ahh right on. i can imagine these parts are gonna be expensive...:(

[bagman1]

ahh right on. i can imagine these parts are gonna be expensive...:(

Yeah they're gonna sting alittle.

[boostdprotegelx]

Yeah they're gonna sting alittle.
figured.. include the mounting bolts too please!!

[bagman1]

figured.. include the mounting bolts too please!!
get this to you shortly.

[boostdprotegelx]

get this to you shortly.
just out of curiosity..for all the interior pieces...since i will be ordering them, what's cost on a new dash, and how hard is it to take it out?

[bagman1]

just out of curiosity..for all the interior pieces...since i will be ordering them, what's cost on a new dash, and how hard is it to take it out?

I will add it to the list.

As for ease of install I would say @ a 6 out of 10 on the install-o-meter.

JMBaggie

[boostdprotegelx]

I will add it to the list.

As for ease of install I would say @ a 6 out of 10 on the install-o-meter.

JMBaggie
gotcha. what is it like...a bunch of bolts to take out?

[bagman1]

gotcha. what is it like...a bunch of bolts to take out?

Yeah it is just removing about 12 bolts and screws and the components.

Do you need all the items or just the primary dash itself.

JMBaggie

[boostdprotegelx]

Yeah it is just removing about 12 bolts and screws and the components.

Do you need all the items or just the primary dash itself.

JMBaggie
umm...dash itself....i think..what all items comes w/ it?

[bagman1]

umm...dash itself....i think..what all items comes w/ it?

Here is a picture let me know what d-codes you'll need.


http://i87.photobucket.com/albums/k129/mazdapart/PROTEGEDASH.jpg

[boostdprotegelx]

Here is a picture let me know what d-codes you'll need.


http://i87.photobucket.com/albums/k129/mazdapart/PROTEGEDASH.jpg
ok..umm.. the dash, all vents, radio surround,...all panels.. glove box.
basically, the msp dash.

i don't need any bolts.

[bagman1]

ok..umm.. the dash, all vents, radio surround,...all panels.. glove box.
basically, the msp dash.

i don't need any bolts.

I 'll add them to the list, in there own section.

JMBaggie

[boostdprotegelx]

I 'll add them to the list, in there own section.

JMBaggie
cool man. thanks.

[boostdprotegelx]

all paid up buddy. thanks for the help.

[bagman1]

all paid up buddy. thanks for the help.

Anytime.

[marshall-BJ-VE]

hey dude, how much for part 64-640 and 64-620 (Z) tray,ash-inner in the pic? available in gray?.

[bagman1]

hey dude, how much for part 64-640 and 64-620 (Z) tray,ash-inner in the pic? available in gray?.

You'll love this one.

Ashtray Assy 64-620:
Part# B25G64610C65 MSRP-21.00 Website-16.80
Ashtray insert 64-640:
Part# B25G64630C65 MSRP-39.05 Website-31.24

Part# listed is for Off-Black(65). Grey is 05 and beige is 80.

[marshall-BJ-VE]

You'll love this one.

Ashtray Assy 64-620:
Part# B25G64610C65 MSRP-21.00 Website-16.80
Ashtray insert 64-640:
Part# B25G64630C65 MSRP-39.05 Website-31.24

Part# listed is for Off-Black(65). Grey is 05 and beige is 80.

PM sent for additional info about it...

[bagman1]

PM sent for additional info about it...

I have not received the PM yet.

[boostdprotegelx]

I"M BACKKKKK..


ok well as it goes right now, there's a couple things that i need.

First off i need the exterior of the trunk thing, circled in pictures, along w/ the light bulb assemblies.

and on the inner part of the trunk, i need the trunk latch(that attaches to the trunk). let me know how much and if you have some pictures of this, show me. thanks.

[boostdprotegelx]

bump!!!

[bagman1]

I"M BACKKKKK..


ok well as it goes right now, there's a couple things that i need.

First off i need the exterior of the trunk thing, circled in pictures, along w/ the light bulb assemblies.

and on the inner part of the trunk, i need the trunk latch(that attaches to the trunk). let me know how much and if you have some pictures of this, show me. thanks.

Extremely sorry but I am just now getting a chance to check my websites. I should know better than to take a weekend off.

Trunk latch:
Part# BL8E56820 MSRP-37.10 Website-29.68

As for the light assy you need I can't locate the picture that you speek of.

[boostdprotegelx]

Extremely sorry but I am just now getting a chance to check my websites. I should know better than to take a weekend off.

Trunk latch:
Part# BL8E56820 MSRP-37.10 Website-29.68

As for the light assy you need I can't locate the picture that you speek of.
do you have a cost for me? for the light assembly?

[bagman1]

do you have a cost for me? for the light assembly?

I am assuming that you need the license plate lamp.

Part# NC1051270C MSRP-45.80ea Website-36.64ea Shipping-4.25

[boostdprotegelx]

I am assuming that you need the license plate lamp.

Part# NC1051270C MSRP-45.80ea Website-36.64ea Shipping-4.25
well, i need the whole assembly thing.. what's in the picture. the silver trim piece, that comes on the trunk, and the light lamp or w/e..

btw, does the trunk latch have wires coming from it?

[bagman1]

well, i need the whole assembly thing.. what's in the picture. the silver trim piece, that comes on the trunk, and the light lamp or w/e..

btw, does the trunk latch have wires coming from it?

That trim piece is available one of to ways:
1- Chrome - BK2H50810 MSRP-152.05 Website-121.64
or
2- Prepainted - B25F50810BXX MSRP-123.95 Website-99.16 (XX is not actually the part# but are replaced with the color part#).

Yes the latch priced is for with interior trunk lamp.

[boostdprotegelx]

That trim piece is available one of to ways:
1- Chrome - BK2H50810 MSRP-152.05 Website-121.64
or
2- Prepainted - B25F50810BXX MSRP-123.95 Website-99.16 (XX is not actually the part# but are replaced with the color part#).

Yes the latch priced is for with interior trunk lamp.
a primer would be fine for mine. i don't need anything special. certainly not chrome.!! lol.


100.00 plus about 40.00 for the latch. ok. lemme work it out. thanks.

[bagman1]

a primer would be fine for mine. i don't need anything special. certainly not chrome.!! lol.


100.00 plus about 40.00 for the latch. ok. lemme work it out. thanks.

No problem. Anytime.

[boostdprotegelx]

No problem. Anytime.
lastly, i need the hinges for the hood, that mount to the frame!! mine broke off..don't ask why. anyways, if you would, add this, and send all in the format as done before to my e-mail if you could. thank you jason.

[boostdprotegelx]

bump?

[bagman1]

bump?

I will get to you ASAP.

[boostdprotegelx]

I will get to you ASAP.
got it, however, the format sent, i can't get into. the google w/e... :)

[steve_protege]

I think Im going to need some parts as well!!

Here is what I think Im going to need. If anything else, I'll let you know:

1) 03.5 rear lip

2) (4) sets of Mazda locking lug nuts

If you can get it.... an OEM EGR valve from the 99-00 Protege DX sedan. 1.6 liter ZM-DE engine and BJ tranny. My valve is faulty and needs to be replaced to get rid of my CEL. Thanks.

[bagman1]

I think Im going to need some parts as well!!

Here is what I think Im going to need. If anything else, I'll let you know:

1) 03.5 rear lip

2) (4) sets of Mazda locking lug nuts

If you can get it.... an OEM EGR valve from the 99-00 Protege DX sedan. 1.6 liter ZM-DE engine and BJ tranny. My valve is faulty and needs to be replaced to get rid of my CEL. Thanks.

Sorry for the delay. I just now got this site to come up for me.

Rear lip spoiler: 00008YC3200 MSRP-250.00 Website-200.00 shipping-45.00

Lock set: 000088120CBP MSRP-31.00 Website-24.80 Shipping-4.25

EGR Valve: BP4W20300A9U MSRP-269.70 Website-215.76 shipping- 0.00 within the US

Sorry again for the delay.

[boostdprotegelx]

Sorry for the delay. I just now got this site to come up for me.

Rear lip spoiler: 00008YC3200 MSRP-250.00 Website-200.00 shipping-45.00

Lock set: 000088120CBP MSRP-31.00 Website-24.80 Shipping-4.25

EGR Valve: BP4W20300A9U MSRP-269.70 Website-215.76 shipping- 0.00 within the US

Sorry again for the delay.
lol, again...more... i have been intersted in the msp pedals-brake,clutch,accel/dead...what's cost on these, and, are they overlays or do you have to remove your old ones and put these on?(i hope this way)_

[Kansei]

MSP has no deadpedal, and they are overlays sorta.. you have to pull the rubber off your clutch and brake, and you have to drill two little holes in the accelerator pedal to bolt it on. When you find out what size the little hole is, let me know. that's the only pedal I haven't installed yet.

[boostdprotegelx]

MSP has no deadpedal, and they are overlays sorta.. you have to pull the rubber off your clutch and brake, and you have to drill two little holes in the accelerator pedal to bolt it on. When you find out what size the little hole is, let me know. that's the only pedal I haven't installed yet.
lol. there is a dead pedal i'm pretty sure..i thought i saw that.

[Kansei]

lol. there is a dead pedal i'm pretty sure..i thought i saw that.

nope, there isn't. It's just the plastic/rubber molded to the carpet just like on my P5. If you saw a deadpedal that matches the pedals, then someone had it custom made.

[D-rock240]

03msp.com had them a couple years ago.

[bagman1]

lol, again...more... i have been intersted in the msp pedals-brake,clutch,accel/dead...what's cost on these, and, are they overlays or do you have to remove your old ones and put these on?(i hope this way)_

Sorry for the delay in response. I was at a race all weekend.

I will add these to the list.

[boostdprotegelx]

Sorry for the delay in response. I was at a race all weekend.

I will add these to the list.
didja win?

[bagman1]

lol, again...more... i have been intersted in the msp pedals-brake,clutch,accel/dead...what's cost on these, and, are they overlays or do you have to remove your old ones and put these on?(i hope this way)_

The pedal set is just a simple slip on.

00008RC19 MSRP-60.00 Website-48.00

There is not a MSP special deadpedal that I can find in any of my information.

[boostdprotegelx]

The pedal set is just a simple slip on.

00008RC19 MSRP-60.00 Website-48.00

There is not a MSP special deadpedal that I can find in any of my information.
hmm.. does that include all pedals?

[bagman1]

hmm.. does that include all pedals?

That kit contains clutch, brake and accel pedals.

[zumzumzoom03]

That kit contains clutch, brake and accel pedals.


Damn that's not a bad price. I actually think it's reasonable and it's from the factory. Strange

[boostdprotegelx]

That kit contains clutch, brake and accel pedals.
kcool. add to list. e-mail me. kthx.

[bagman1]

kcool. add to list. e-mail me. kthx.

I will get the list to you ASAP.

It's a Monday from Hell!

[boostdprotegelx]

I will get the list to you ASAP.

It's a Monday from Hell!
take your time. i'm good to go. you always come through.

[bagman1]

take your time. i'm good to go. you always come through.

Just sent the list. Sorry it took so long.

[steve_protege]

Sorry for the delay. I just now got this site to come up for me.

Rear lip spoiler: 00008YC3200 MSRP-250.00 Website-200.00 shipping-45.00

Lock set: 000088120CBP MSRP-31.00 Website-24.80 Shipping-4.25

EGR Valve: BP4W20300A9U MSRP-269.70 Website-215.76 shipping- 0.00 within the US

Sorry again for the delay.

Prices aren't too bad. The EGR valve is cheaper thru you than from AutoZone, Discount Auto Parts etc... They wanted 221 dollars and change to order the part. Is the 24.80 plus shipping for the 4 sets or just one? I'll be getting in touch with you again about these in the next couple weeks. Thanks.

[bagman1]

Prices aren't too bad. The EGR valve is cheaper thru you than from AutoZone, Discount Auto Parts etc... They wanted 221 dollars and change to order the part. Is the 24.80 plus shipping for the 4 sets or just one? I'll be getting in touch with you again about these in the next couple weeks. Thanks.

The 24.80 is per set. The shipping is 4.25 until the whole order is over 100.00, once over 100 shipping is free.

[chaos4]

How about the Mazdaspeed Cold Air Intake, PN GMRS-8M-L29? Price and expected availability? Also Cat Back PN GRMS-8M-L26?(dunno)
Thanks

[bagman1]

How about the Mazdaspeed Cold Air Intake, PN GMRS-8M-L29? Price and expected availability? Also Cat Back PN GRMS-8M-L26?(dunno)
Thanks


I know of which you speak. They will not be available until early March. I was going to make an announcement Monday on these and a couple of other items that are specific to the MS3.

As it currently sits I will be offering the CAI for an introductory price of 310.00 and the exhaust at 575.00 shipped. I will make all this official as of Monday.

[chaos4]

I know of which you speak. They will not be available until early March. I was going to make an announcement Monday on these and a couple of other items that are specific to the MS3.

As it currently sits I will be offering the CAI for an introductory price of 310.00 and the exhaust at 575.00 shipped. I will make all this official as of Monday.


wooo hoo!! Thanks Bagman! Looks like a quick 30 hp+ and all street legal.
I will watch for the announcement and place my order right up front!!(eekdance)

[boostdprotegelx]

hey man, just out of curiousity...can i order a new speedo guage(JUST the speedo) and, would it be able to set the mileage back to ZERO?(just got a new motor, easier to deal with.


umm. yeah. thanks.

ALSO, i'll need driver and passanger pillars. cuz mine are in the shittiest condition known to man.

[bagman1]

hey man, just out of curiousity...can i order a new speedo guage(JUST the speedo) and, would it be able to set the mileage back to ZERO?(just got a new motor, easier to deal with.


umm. yeah. thanks.

You cannot get the speedo seperately of the unit.

Part# BL8S55471A MSRP-552.11 Website-441.69

But when you plug it in your odo would be 000000's

BTW- everything is shipping today UPS to the address everything else went to.

[boostdprotegelx]

You cannot get the speedo seperately of the unit.

Part# BL8S55471A MSRP-552.11 Website-441.69

But when you plug it in your odo would be 000000's

BTW- everything is shipping today UPS to the address everything else went to.
ok cool. WOW, that's some money. what about pillars?

[bagman1]

ok cool. WOW, that's some money. what about pillars?

A, B or C ?

[boostdprotegelx]

A, B or C ?
a pillars.

[FSCatalyst]

Might as well slip this in since everyone is asking for pricing and what not.

I haven't really looked into it but I took a look at the MAZDASPEED brochure and in the MX-5 Roadster section there is a really sexy looking CF Shiftknob wit Mazdaspeed written on top and a matching E-Brake lever. Just wondering if these would fit on the Protege's. and is the e-brake lever a cover or somesort? If so then it might not fit the proteges if its different lengths and stuff. Hmm...

thanks

[bagman1]

Might as well slip this in since everyone is asking for pricing and what not.

I haven't really looked into it but I took a look at the MAZDASPEED brochure and in the MX-5 Roadster section there is a really sexy looking CF Shiftknob wit Mazdaspeed written on top and a matching E-Brake lever. Just wondering if these would fit on the Protege's. and is the e-brake lever a cover or somesort? If so then it might not fit the proteges if its different lengths and stuff. Hmm...

thanks

Regretfully the CF shifter knob will not fit the Protege shifter as the the Protege shifter is a larger diameter than the MX-5. As for the Parking brake lever it will fit the Protege.

[bagman1]

a pillars.

Rt side BL8D6816003 MSRP-45.20 Website-36.16
Lt side BL8D6817003 MSRP-45.20 Website-36.16

[boostdprotegelx]

Rt side BL8D6816003 MSRP-45.20 Website-36.16
Lt side BL8D6817003 MSRP-45.20 Website-36.16
woot thanks. man this thread shows a lot of interest from people...tracking #?

[bagman1]

woot thanks. man this thread shows a lot of interest from people...tracking #?

I noticed the amount of traffic on this thread yesterday.

Your tracking# is 1Z2189940247564233

My guy left out the pedal set so they are getting USPS'ed out today you will see them on Sat.

[boostdprotegelx]

I noticed the amount of traffic on this thread yesterday.

Your tracking# is 1Z2189940247564233

My guy left out the pedal set so they are getting USPS'ed out today you will see them on Sat.
woohoo. very awesome man. i'm excited. no worries on the pedal.

if you're shipping them out today, and they haven't gone out yet, ...pming you on a different shipping address.

[bagman1]

woohoo. very awesome man. i'm excited. no worries on the pedal.

if you're shipping them out today, and they haven't gone out yet, ...pming you on a different shipping address.


Send it to me and I will mail them to it.

[boostdprotegelx]

Send it to me and I will mail them to it.
couple things..i still have parts lying around from you, that i ended up not using..what can i do about this?

also, i went to put in the glove box, and the surround, that connects the glove box to the dash,...i can't get it to fit..i'm not sure it's the right one.Unless there's a special way to do it. it just doesn't seem like it's the right one.


my next order will consist of the pillars, 5th gear(both), and prolly the cluster.

i was wondering if you knew how much the plastic piece costs that holds the cluster in place.(it's the part that you screw the metal bracket(the one on the cluster) to the dash. I don't have that piece for some reason.

[bagman1]

couple things..i still have parts lying around from you, that i ended up not using..what can i do about this?

also, i went to put in the glove box, and the surround, that connects the glove box to the dash,...i can't get it to fit..i'm not sure it's the right one.Unless there's a special way to do it. it just doesn't seem like it's the right one.


my next order will consist of the pillars, 5th gear(both), and prolly the cluster.

i was wondering if you knew how much the plastic piece costs that holds the cluster in place.(it's the part that you screw the metal bracket(the one on the cluster) to the dash. I don't have that piece for some reason.

As for the parts that you did not use PM me the part #'s and I will let you know.

Glove box install directions:

http://i87.photobucket.com/albums/k129/mazdapart/GLOVEBOXINSTALL.jpg

Cluster picture: let me know what item you are missing.

http://i87.photobucket.com/albums/k129/mazdapart/PROTEGEINSTR.jpg

[boostdprotegelx]

As for the parts that you did not use PM me the part #'s and I will let you know.

Glove box install directions:

http://i87.photobucket.com/albums/k129/mazdapart/GLOVEBOXINSTALL.jpg

Cluster picture: let me know what item you are missing.

http://i87.photobucket.com/albums/k129/mazdapart/PROTEGEINSTR.jpg
99865-0516B- you see that screw? pointing up? that screw, goes into the piece i'm talking about.




those install directions on the glove box don't show what i mean, i'll check out d-rocks tomorrow.

the other parts, i'll pm you this weekend. thanks man.

[bagman1]

99865-0516B- you see that screw? pointing up? that screw, goes into the piece i'm talking about.




those install directions on the glove box don't show what i mean, i'll check out d-rocks tomorrow.

the other parts, i'll pm you this weekend. thanks man.

Part# BH0V55468 MSRP-5.70 Website-4.56

I would have to order it.

[boostdprotegelx]

Part# BH0V55468 MSRP-5.70 Website-4.56

I would have to order it.
picture?

that sounds right.

[boostdprotegelx]

picture?

that sounds right.
also, the lisence plate thing i just got, worked great, however, i need the light holder assembly or w/e...lmk.


so, next order,..

2 pillars, fifth gear, rear lisence plate light assembly, the plastic piece we spoke about....send me in e-mail please. and, i'll need the msp bracket for the head unit.

[bagman1]

also, the lisence plate thing i just got, worked great, however, i need the light holder assembly or w/e...lmk.


so, next order,..

2 pillars, fifth gear, rear lisence plate light assembly, the plastic piece we spoke about....send me in e-mail please. and, i'll need the msp bracket for the head unit.

I will work this list up and get it to you by Monday am.