Spicy Msp Engine Setup Pics

[SergMSP]

Hey All,

Finally got some pics of my setup to post for anyone's opinions, likes, and dislikes. I am looking to add some mods and would like your suggestions and I would like to see if any vendors can sell me parts that will work with my setup. Thanks to all!

Serg

[rocketr2]

Looks good. How it running ? any stalling issue ? how about the turkey, is it still present ?

[SergMSP]

Looks good. How it running ? any stalling issue ? how about the turkey, is it still present ?

Yes sir, I used to have Stalling issues when the BOV was first installed. But with help from the tech, we were able to tune the soft/hard setting on the bov and raise the level of the Idling so that it wouldn't turn off. Now, it doesnt turn off on me at all. The turkey, yes, i still get it, but it depends, if im accerlating hard i'll hear the sweet whistle sound from the greddybov venting...

[SergMSP]

Hey all, I've seen a lot of MSP's with a hardpipe where I still have the stock rubber one. Can someone help me identify what the name of it is? Where can i buy a better one, steel one? What exactly are the pros/cons of changing this pipe or leaving it the way it is?
Sorry...still newb, Thanks

[MSP#735]

http://www.***************/MSP_Hard_Piping_p/sumspcp.htm enjoy!

[SergMSP]

http://www.***************/MSP_Hard_Piping_p/sumspcp.htm enjoy!
Thanks dude, that explained everything. I am also looking into purchasing a SMIC, I was looking into the CustomMSP, or the Corksport Power Series.
If I buy the SMIC, will the steetunit pipe still be ok with it? Or do I have to replace it to match the SMIC?

Not sure if I should just buy the pipe or wait to save up for the SMIC...maybe that pipe comes with the SMIC???.......

[Chilledboost]

get the custom msp one corksport is overpriced

[540James]

*************** will be able to supply you with the whole system, 2 pipes and SMIC

[SergMSP]

*************** will be able to supply you with the whole system, 2 pipes and SMIC

Yea but I want to stay with my setup or else I'll lose the Greddy BOV I already have on there, you know? Not only that, it's 795$ kid...mucho son...

Do you know if I just get the coldpipe alone, if i'll have problems ?? Is it wierd that I have my BOV on my hot pipe? All the setups I've seen the BOV is on the cold pipe....Pls correct me if im wrong..

[rocketr2]

Yea but I want to stay with my setup or else I'll lose the Greddy BOV I already have on there, you know? Not only that, it's 795$ kid...mucho son...

Do you know if I just get the coldpipe alone, if i'll have problems ?? Is it wierd that I have my BOV on my hot pipe? All the setups I've seen the BOV is on the cold pipe....Pls correct me if im wrong..

I also have the bov on the hot side, check it out.
http://www.msprotege.com/forum/showpost.php?p=2470493&postcount=1

If you run the BOV on the cold side, the turkey should disappear.

[SergMSP]

I also have the bov on the hot side, check it out.
http://www.msprotege.com/forum/showpost.php?p=2470493&postcount=1

If you run the BOV on the cold side, the turkey should disappear.

But don't you get the turkey on either pipe? Does the BOV sound/perform better on the cold pipe???

Do you know where I could get a cold pipe besides **********'s $200 one?

Thx again, Serg

[jeffmsp]

fyi there isnt a performance improvement from the cold side hard pipe. It doesnt expand really since the IC cools the charge. ive had it and sold it. Corky bell found no gains with it either. they do look nice though.

[Dugg E Fresh]

...

Do you know where I could get a cold pipe besides **********'s $200 one?

Thx again, SergI picked up only the hotpipe from a forum member. Keep a lookout in the FS section. Personally, I've only seen Cullen selling the new pipes separate.
Somebody else can chime in to let us know if there are others?

[BlueBeast22]

Just go with a FMIC, you will love it :)

[SergMSP]

decided to go with custommsp SMIC and hardpipe from SU..

[Dugg E Fresh]

That's a dual setup then? One recirculating and one venting? Turkey? Stalling?

[SergMSP]

That's a dual setup then? One recirculating and one venting? Turkey? Stalling?

actually i am only venting! no stalling but have the BOV setting on pretty hard...waiting on reflex bpv i ordered to finish dual valve setup...keep you posted

[Brian MP5T]

Nice!