PDA

View Full Version : Mazdaspeed 3 LSD part # and when avaliable?


FlipandFunk
08-07-2006, 11:17 AM
When can I buy this part and how would it be?

thanks

jmv
08-07-2006, 11:21 AM
well considering the cars aren't out yet.... and the fact that no one actually knows if its a good piece or not..... i would say you'll prolly be waiting a while. And buying from the dealer will prolly be really expensive.

FlipandFunk
08-07-2006, 11:24 AM
its the similer one to the RX8/MSP. It worked well on my protege. This will be going in my Speed6.

bagman1
08-07-2006, 11:51 AM
its the similer one to the RX8/MSP. It worked well on my protege. This will be going in my Speed6.

As soon as this is info is available from Mazda I will make a post on it. It should be a direct bolt in just expensive.

JMBaggie

FlipandFunk
08-07-2006, 12:02 PM
isn't the Tochigi Fuji LSD on the protege about 450dollars from the dealer?? I'm thinking it will be priced about the same.

bagman1
08-07-2006, 12:11 PM
isn't the Tochigi Fuji LSD on the protege about 450dollars from the dealer?? I'm thinking it will be priced about the same.

Actually the one for the MS is 615.00 and it isn't even an LSD, so figure 1.5 times that(at least) for the LSD.

JMBaggie

TheMAN
08-07-2006, 08:06 PM
it won't bolt in.... the A26M-R is way different from the G35M-R... its probably the same tranny as that getrag that was used in the svt focus... 3 shafts instead of 2 which makes for 2 different final drives

you have a better chance of adapting the MSP's LSD into the G35M-R as it is also a G tranny which basically has the same design

FlipandFunk
08-07-2006, 08:19 PM
mazdaspeed 3/6 tranny is all NEW and they are exactly the same.

mp3josh
08-07-2006, 08:31 PM
I think Edwin would know more about it than you would, he is like the god of mazda parts info.

FlipandFunk
08-07-2006, 08:43 PM
the ms6 tranny is not a getrag, focus does not have triple cone syncros. This tranny is a all new design by mazda and shared with the ms3.

"MAZDASPEED6 also has a completely new six-speed manual transmission" - Ford press release

http://media.ford.com/newsroom/feature_display.cfm?release=19650

TheMAN
08-07-2006, 08:57 PM
ok, so it's not a getrag... I said "probably", which doesn't merit an argument in the first place, so lighten up!

since you seem to know more about this than I do, why don't you spend at least $1000 on the *special order part* and make it work?

oh yeah, most places don't take returns on special order parts btw

FlipandFunk
08-07-2006, 09:15 PM
no no no, yer the one spewing tranny model numbers and what not. So don't get pissed at me. I'm just going by press release from ford confirming that the ms3 and ms6 shares the same new tranny.

Captain KRM P5
08-07-2006, 09:32 PM
you don't suppose the fact that the ms6 and the ms3 are all wheel versus front wheel drive will affect fitment of said differential? just posing a question.

and how does one figure the differential in a mazdaspeed protege is not a limited slip differential?

TheMAN
08-07-2006, 09:42 PM
no no no, yer the one spewing tranny model numbers and what not. So don't get pissed at me. I'm just going by press release from ford confirming that the ms3 and ms6 shares the same new tranny.

you damn right I'm "spewing tranny model numbers"... if you searched, you'd know what a G35M-R is and what's its used in... and common sense says its NOT the same as the ms3's tranny

you were asking for the ms3 LSD, and we can only assume that:
-you have an MSP and want to put that shit in
OR
-you have a normal mazda3 and want to put that shit in

we can ONLY assume because you're either lazy or secretive in putting down what car you drive in your profile/sig

do you want to try to fit it in the ms6's tranny which is the "same" as you said (and its MOSTLY is) when it has an LSD?

FlipandFunk
08-07-2006, 09:52 PM
you damn right I'm "spewing tranny model numbers"... if you searched, you'd know what a G35M-R is and what's its used in... and common sense says its NOT the same as the ms3's tranny

you were asking for the ms3 LSD, and we can only assume that:
-you have an MSP and want to put that shit in
OR
-you have a normal mazda3 and want to put that shit in

we can ONLY assume because you're either lazy or secretive in putting down what car you drive in your profile/sig

and why the fuck do you want to try to fit it in the ms6's tranny which is the "same" as you said (and its MOSTLY is) when it has an LSD?

are you retarded?? mazda expert?? lol stop it man. Ms6 doesn't have a front limited slip. I was trying to be nice by not being harsh but really man, your making yerself look even more retarded. just stop.

This isn't your thread, and your not bringing anything usuful. You are also not proving anything but that your are a douchebag that got his panties wet because i proved you wrong.

TheMAN
08-07-2006, 10:27 PM
how suppose are you going to cram a front LSD into the A26MX-R (ms6 tranny) when the front differential is ALSO the transfer case? it's NOT your traditional 4x4 shit where you have a transfer case bolted onto the outside of the tranny and have a dedicated driveshaft/differential for the front wheels and for the rear wheels

bagman1
08-08-2006, 08:11 AM
I am going to make this short an as sweet as possible.

I always want my threads to open peoples questions and opinions without the need of other forum members to start down a path of calling each other out.

1-If there is need to correct somebody for a flawed statement please do it in such a way that you would want yourself to be corrected.

2-If you are not 100% on your information do not post, unless you announce that you may be talking out your ass about something.

3-The primary person to answer a question should be me unless you can follow #2. If you cannot the your input is not needed. Remember people when we answer a persons question we are giving that forum member advice in which way he is planning to spend his money on his next modification, upgrade or repair. So if you are not 100% on the answer then do not answer.


This is not to piss any body off. This is to tell you that this is unacceptable on my section of this forum. If you find somebody you don't agree with or have an issue with you have 2 choices, 1- PM me with the issue and I will take care of it or, 2- ignore it, sometimes a non comment is more powerful than getting dragged into a pissing match.

These are my rules please abide by them.

JMBaggie