PDA

View Full Version : P5 factory stereo with an output for MP3 player


kahn_bat
06-30-2006, 03:01 PM
I am looking for a simple way to install an output for a MP3 player with my factory stereo. It can be a phone jack or a RCA or ipod. I have been looking at the forum for sometime, but I can't find an answer. I am not a tech person to look for the best sound. Simple but worth while investment is the key. I am look into open it up with minimum modification to install the device.

I have looked the dension usa, Blitzsafe and a FM modulator from crutchfield.com.I am not sure which is a best method to do it.

If you have an answer for me, please also provide all of the model numbers and necessary attachement kits for me to track them down.

Thank you for your help.

chuyler1
07-07-2006, 04:09 PM
First, this is the MSP section not the P5 section. They have different stereos so posting in this sub-forum is not going to help you very much. If you don't know the difference between a MSP and a P5 you have some reading to do.

Second, I believe you are looking for a MP3 player INPUT for the stock stereo, not an output. If that is the case, this has been discussed numerous times. Try searching the board for "auxiliary input" or "AUX MOD" and you'll find what you are looking for.

Welcome to the forum and be sure to read the Mazda Forums Rules and Guidelines (http://www.msprotege.com/forum/announcement.php?f=17)

kahn_bat
07-12-2006, 02:04 PM
Thank you! I will look into it.