Strut hats/ mounting plates

[yashart_mp3]

Not sure if that is what they are really called or not, but i included a pic below. When i sold my MP3 suspension setup, I sold the entire assembly. I am ordering a set of Tokico HP's, and need these so that i can mount the spring back on. Thats what i think anyway, unless the new shocks come with them already?

Here they are circled in red. I need them for the front and back. I will most likely need the dust boot as well. Thanks!


http://img.photobucket.com/albums/v168/yashart7/untitled.jpg

[TheMAN]

if you sold them complete as you say, then you need to buy ALL of that shit in that picture... that's at least $200 of parts

protegegarage or montgomery mazda should be able to give you a deal on it

[bagman1]

Not sure if that is what they are really called or not, but i included a pic below. When i sold my MP3 suspension setup, I sold the entire assembly. I am ordering a set of Tokico HP's, and need these so that i can mount the spring back on. Thats what i think anyway, unless the new shocks come with them already?

Here they are circled in red. I need them for the front and back. I will most likely need the dust boot as well. Thanks!


http://img.photobucket.com/albums/v168/yashart7/untitled.jpg

Front strut mounts:
CB0134380 MSRP-58.35ea Website-46.68ea
Front dust boots:
C100340A5 MSRP-9.50ea Website-7.60ea

Rear strut mounts:
RT-B25D28380B MSRP-50.55 Website-40.44
LT-B25D28390B MSRP-50.55 Website-40.44
Rear dust boots:
B01C280A5A MSRP-26.05ea Website-20.84ea

Some of this stuff I have in stock some I do not. Figure 2-4 days to me then shipped to you.

JMBaggie

[TheMAN]

I recommend C145-34-380 over CB01... stiffer rubber bushings; used on MSP
I also recommend BJ3D-28-380 and BJ3D-28-390 over B25D... also slightly stiffer bushings

the "wrong" parts work better and fits, simple as that
since it's apparent he no longer has all the other parts, he will need D-Codes 28-0A1A, 28-019E, 28-243B, 28-809, 28-0A3A, 34-003, 34-381B, 34-341, 34-012, 34-0A3 in addition to the other parts numbers that's been listed

and before we forget, BN7H-34-111 (x4) will also be needed

[yashart_mp3]

I am in the process of ordering these parts online now. For the spring bumper and insulator, i need to select "w/ sport suspension" since its for the MP3 correct?

[bagman1]

I am in the process of ordering these parts online now. For the spring bumper and insulator, i need to select "w/ sport suspension" since its for the MP3 correct?

4-disc sport suspension or MPS suspension will be correct. Sorry for the delay in response.

JMBaggie

[yashart_mp3]

before i place the order, does the mp3/msp have different strut mounts upfront? Are they different from the es? or are they all the same?

[bagman1]

before i place the order, does the mp3/msp have different strut mounts upfront? Are they different from the es? or are they all the same?

Yes the MP3/MSP use the same strut mounts as the ES (sport susp.)

JMBaggie

[zumzumzoom03]

Order through Bagman1. Very good service and the parts are very well priced. He saved me over 100 dollars from what the dealer quoted me on.

[yashart_mp3]

that's at least $200 of parts

Just placed my order. Came out to $200.24, lol

[zumzumzoom03]

Nice thats how much I spent too. The person that put GC Coilovers on there took off a lot of parts and I'm trying to put H & R on and needed to get these parts. Why he took them off I have no idea.

[bagman1]

Just placed my order. Came out to $200.24, lol

I did receive your order. I went ahead and proccessed it from the house so that all the parts will ship to you on Friday instead of Monday.

Thanks for the order,
JMBaggie

[yashart_mp3]

I got the box. Everything was neatly packed & well protected! Thanks!!!!

But, it looks like i need some more parts!

I need the rubber top part that goes in the spring insulator for the front suspension. I have the bottom seat, but do not have the top "seat" or whatever its called. I didnt see it online... what is the part number/ prices?

[bagman1]

I got the box. Everything was neatly packed & well protected! Thanks!!!!

But, it looks like i need some more parts!

I need the rubber top part that goes in the spring insulator for the front suspension. I have the bottom seat, but do not have the top "seat" or whatever its called. I didnt see it online... what is the part number/ prices?

Part# B25D34012 MSRP-5.35ea Website-4.28ea

I would have to order them.

Sorry for the delay in response.

JMBaggie

[TheMAN]

Yes the MP3/MSP use the same strut mounts as the ES (sport susp.)

JMBaggie

yes and no
the MP3 has the same strut mounts as all the regular proteges
like I've mentioned in my other post, the MSP had uprated strut mounts (stiffer rubber bushings) and is listed as "MPS2 suspension" in the EPC

[yashart_mp3]

Another order placed. hopefully I got everything I need to finish my front suspension this time around :)

Thank both of you for all of your help!