A few things I can't seem to find...

[mSHOCKERp]

Hello,

I was wondering if you could help me get some pricing and ordering info on a few OEM Mazdaspeed Protege parts:

- Front bumper clips that attach the bumper right under the corners of the headlights (pic attached)
- High pressure AC hose
- Adhesive strips to reattach front bumper lip (if such a thing exists)

Thank you very much in advance, my local dealer isn't too strong on parts knowledge.

Mike

[mSHOCKERp]

Bueller? I am getting really hot with no AC and I have cash in hand, I just want to make sure the local dealer isn't jacking me on the price and I'd like to order from this website to help support a dealership that supports us. Thanks.

Mike

Hello,

I was wondering if you could help me get some pricing and ordering info on a few OEM Mazdaspeed Protege parts:

- Front bumper clips that attach the bumper right under the corners of the headlights (pic attached)
- High pressure AC hose
- Adhesive strips to reattach front bumper lip (if such a thing exists)

Thank you very much in advance, my local dealer isn't too strong on parts knowledge.

Mike

[bagman1]

Bueller? I am getting really hot with no AC and I have cash in hand, I just want to make sure the local dealer isn't jacking me on the price and I'd like to order from this website to help support a dealership that supports us. Thanks.

Mike

First let me apologize for not responding sooner I apparently I completely overlooked this thread. I cannot appologize enough.

AC HP Hose Part# BJ1P61461A MSRP-101.05 Website-80.84

HL Brackets
RT- B30D5100A7A MSRP-4.70 Website-3.76
LT- B30D510B7A MSRP-4.70 Website-3.76

On the adhesive strips, we just use 3M double sided tape to do simple repairs. Otherwise we have to replace the piece all together.


Once again I do appologize for the slow response, I will do everything in my power not to let it happen again.

JMBaggie

[mSHOCKERp]

It's all good no need to apologize, I am just sweating it out here in MD hahah. That is a great price on the AC piece and the HL brackets are much needed because I snapped both getting my bumper off while doing my FMIC install. Thanks for the help, so I should be able to just search by part number on the site right?

Mike

[bagman1]

It's all good no need to apologize, I am just sweating it out here in MD hahah. That is a great price on the AC piece and the HL brackets are much needed because I snapped both getting my bumper off while doing my FMIC install. Thanks for the help, so I should be able to just search by part number on the site right?

Mike

I got your order. It will shipout Wed.

Thanks again,
JMBaggie

[MrDiggler]

Got the scuff plates. Thanks!

Will also be ordering a pair (or two) of those clips for the bumper. Been searching in vain for the part number and will surely need them during my FMIC install.

[bagman1]

Got the scuff plates. Thanks!

Will also be ordering a pair (or two) of those clips for the bumper. Been searching in vain for the part number and will surely need them during my FMIC install.


If possible post a picture of the clips and I will find them for you.

JMBaggie

[MrDiggler]

Thanks, but the part numbers are posted above. I just have to take time to order them.

BTW (getting completely off topic) what's your price on a P5 radiator?

[bagman1]

Thanks, but the part numbers are posted above. I just have to take time to order them.

BTW (getting completely off topic) what's your price on a P5 radiator?

Radiator info below:
MT-ZM3915200C MSRP-345.26 Website-276.21
AT-FS8M15200B MSRP-297.20 Website-237.76

I would have to order the MT radiator.

JMBaggie

[mSHOCKERp]

Just wanted to stop by in and let everyone know the parts came in quickly and were perfect! I managed to break the AC line within 30 minutes trying to bend the fitting to go around my hardpipe but oh well, hahah.

Mike

[bagman1]

Just wanted to stop by in and let everyone know the parts came in quickly and were perfect! I managed to break the AC line within 30 minutes trying to bend the fitting to go around my hardpipe but oh well, hahah.

Mike

I am sorry to hear this. If I can help just let me know.

JMBaggie