6 outputs from stock hu is it possible

[Leger]

I was wondering if it is possible to get 5 or 6 rca outputs from the stock hu with LOC's or something because i want FR,FL,RR,RL,Sub outputs. I do not want a aftermarket hu because ive had them stolen like 7 times now i think so i want it to look stock. And as far as sq goes how much noise do ya get using LOC's?
Thanks for your time
Leger

[jadonP5]

are you going to run 5 or 6 amps? you don't need rca's for every speaker....example....1 set (4 channel) goes into an amp, and the speaker wires then deliver power to all four speakers.

[Leger]

2 amp 1 for sub 1 for midrange but i want the fader to work as well so i have a 4 ch amp for the purpose.

[jadonP5]

does either of your amps have rca output capability?

[Leger]

boss pd 3000 and a kicker something (in other car so dunno bout that one) so im going to say no

[Leger]

nm think they do?

[jadonP5]

well if the 4 channel amp has outputs, you'll only need one 4 channel loc (check out www.davidnavone.com) to go into the 4 channel amp, then a 2 channel patch rca cable to go from that to the sub amp.

[jadonP5]

also, with a high quality loc and well grounded system, noise will not be an issue.

[Leger]

any recomendations as to which loc i should get and is there any with a remote lead already incorperated into it>?

[jadonP5]

the site that i linked to has great quality loc's

[Leger]

would a 4 ch loc put into a xover/crossover then put to the 2 amps work ? http://www.sonicelectronix.com/item_5835.html MA Audio MA15EQX
15-Band Graphic Equalizerw/ 3-Way Crossover

[tsunami]

www.davidnavone.com

you want a 4ch loc, then most amplifiers let you daisy chain rca's from one to the next so if you have a four channel rca you put all four channels into your amp for the speakers and select the fronts for the front and rears for the rear, and since you will be running the same amperage to the fronts and rear your sub amp should be able to run off the rear channel by selecting that input to carry over to daisy chain into the next amp and on my JL's you can select a clean signal before filters or after... either way i think you are making this more complicated then it needs to be.