High Temp Manifold Bolts?

[nk2a]

Are there any aftermarket exhaust manifold bolts with higher temp ratings then the stock MSP manifold bolts? I've had to replace one of the stock bolts twice due to heat cracks.

[Puckpimp71]

bump

[nk2a]

Has anyone else had this problem?

[eddiejoe56]

Has anyone else had this problem? It's the bolt closest to the turbo.

I've had the two bolts on the passenger side break right off about the same time the manifold crotches cracked. I have yet to replacement them

Does anyone know the part number for these?

[MrDiggler]

I've had the two bolts on the passenger side break right off about the same time the manifold crotches cracked. I have yet to replacement them

Does anyone know the part number for these?

Check out the vendor section for Montgomery Mazda, they can help you find out.

[nk2a]

now on my third

[Boston5761]

Arp?

[nk2a]

Does anyone know the size and length of the manifold bolts? I found a couple places that have high temp bolts but need specifics before knowing if they have anything in stock. Also what would be a good temp rating?

[Talrum]

I've had the two bolts on the passenger side break right off about the same time the manifold crotches cracked. I have yet to replacement them

Does anyone know the part number for these?


Do you get a bad smell in the cabin after hard acceleration like pulling 6000rpm? I get this really bad sulfur (maybe exhuast smell) when i rev high.

[Puckpimp71]

eat less beans?

[nk2a]

wanted to link these threads > http://www.msprotege.com/forum/showthread.php?t=123614300