View Full Version : Usable 2000 626 parts ??
vxfilmer1000
05-09-2006, 11:41 PM
Okay like many of you know my mom has totaled her 2000 Mazda 626 (4 cylinder) and i am already taking her intake manifold and EGR pipe and was wondering if there is anything else usable motor wise ? Like maybe bigger throttle body or any other parts motor wise ?
vxfilmer1000
05-11-2006, 10:59 AM
bump
smo0f
05-11-2006, 11:01 AM
Pcv
vxfilmer1000
05-12-2006, 12:04 PM
Pcv
What is that exactly used for ?
chexmix78
05-12-2006, 02:09 PM
What is that exactly used for ?
as per about.com
PCV VALVE
Definition: The Positive Crankcase Ventilation valve is an emissions control device that routes unburned crankcase blowby gases back into the intake manifold where they can be reburned. The PCV system is one of the oldest emission control devices, and also one of the most beneficial. Besides totally eliminating crankcase emissions as a source of air pollution, the constant recirculation of air through the crankcase helps remove moisture which otherwise would cause sludge to form. Thus the PCV valve extends the life of the oil and engine. The PCV valve requires little maintenance. The valve and filter should be replaced somewhere around 30,000 to 50,000 miles (see the vehicle owners manual for service intervals).
Captain KRM P5
05-12-2006, 02:11 PM
throttle body is identical. i would pull the engine and build it up for big boost.
Powered by vBulletin® Version 4.1.7 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.