626 Manifold

[vxfilmer1000]

Okay my mom totaled her 2000 Mazda 626 and i was wondering if her intake manifold would fit my 2003.5 MSP. I know some 626 Manifolds fit the MSP but i didnt know the exact year. Also if it will fit what else will i need to take off her car, the egr pipe? or what?

[nazgul350r]

Thats the one protegegarge is selling. You will need a EGR pipe

[vxfilmer1000]

Thats the one protegegarge is selling. You will need a EGR pipe


So the 2000 626 model intake manifold will fit and could i just us the 626 egr pipe off her car too?

[vxfilmer1000]

buuuuuuuump

[vxfilmer1000]

Anyone(peep)

[Rac3rX]

http://protegegarage.com/

Look under MSP for the single runner intake

"Stock Protege EGR pipe will not fit, we will include a new EGR pipe upon request or block off the EGR port on the manifold."

If the one for the Protege doesnt work, they will at least have what you need.

Or Block it off as they have the option to do so.

[vxfilmer1000]

http://protegegarage.com/

Look under MSP for the single runner intake

"Stock Protege EGR pipe will not fit, we will include a new EGR pipe upon request or block off the EGR port on the manifold."

If the one for the Protege doesnt work, they will at least have what you need.

Or Block it off as they have the option to do so.


im am just wondering if the 2000 626 Manifold and EGR pipe will work ?






Also how easy if the install ?

[Captain KRM P5]

yes the manifold and the EGR pipe from the 626 will fit as long as it is not California emissions and is a 4 cylinder

[vxfilmer1000]

yes the manifold and the EGR pipe from the 626 will fit as long as it is not California emissions and is a 4 cylinder


sweet thanks alot man..... how hard is the install ? I will also need a new gasket wont I ?

[Captain KRM P5]

sweet thanks alot man..... how hard is the install ? I will also need a new gasket wont I ?

the install takes about 3 hours give or take. installing a rear engine mount at the same time is a great idea as with the manifold out of the way you have a clear shot. you will need an intake manifold gasket, a throttle body gasket and depending on how damaged they are, injector o-ring/gaskets.

[vxfilmer1000]

the install takes about 3 hours give or take. installing a rear engine mount at the same time is a great idea as with the manifold out of the way you have a clear shot. you will need an intake manifold gasket, a throttle body gasket and depending on how damaged they are, injector o-ring/gaskets.

can i just go to autozone or one of those places and order the TB gasket and manifold gasket ?

[Captain KRM P5]

can i just go to autozone or one of those places and order the TB gasket and manifold gasket ?

you can get the gaskets from me, from mazda or any auto parts stores. ask for intake manifold and throttle body gaskets from either a 2002 626 four cylinder or 2002 protege with a 2.0

[vxfilmer1000]

you can get the gaskets from me, from mazda or any auto parts stores. ask for intake manifold and throttle body gaskets from either a 2002 626 four cylinder or 2002 protege with a 2.0

So i need to just order 2002 mazda 626 intake manifold gasket and TB gasket it will fit the 2000 626 mainfold and my ol MSP motor

[Captain KRM P5]

yes sir


So i need to just order 2002 mazda 626 intake manifold gasket and TB gasket it will fit the 2000 626 mainfold and my ol MSP motor

[Pirana]

One question, if you block the egr, how would you go by so you wont get the CEL.

[Captain KRM P5]

One question, if you block the egr, how would you go by so you wont get the CEL.

some have said that if you leave the tube connected to the intake manifold, cut the end off and place a breather filter on the end, it will not throw a CEL, though honestly i don't see how

[nazgul350r]

As far as gaskets go you could all so use outlaw engineering/nsn motorsports right?

[210_ZOOM]

has anyone had any problems with this mod? and have you had any benefits, noticeably?

[Captain KRM P5]

As far as gaskets go you could all so use outlaw engineering/nsn motorsports right?

the same gaskets used on the stock manifold are used on this one, so yes

[Alejo_NIN]

b u m p, s u b

[vxfilmer1000]

Hopefully next weekend or the next i will have te 626 Manifold on and i will tell u guys my thoughts and how it went

[vxfilmer1000]

Okay when i take out my stock msp intake manifold and put in the 626 manifold do i run the vaccum lines the same and does everything bolt up the samething ? Is there any how-to sections about how to install the manifold ?

[Bala]

This may help: http://www.thestreetforum.com/forum/showthread.php?t=35

[vxfilmer1000]

This may help: http://www.thestreetforum.com/forum/showthread.php?t=35


So you do have to re-route the Vaccum lines ?

[MyOrangeToy]

wow... that seems like a lot of work..

sub...

[Bala]

So you do have to re-route the Vaccum lines ?
Yes ... and you will need a replacement EGR tube. I've got a 626 mani sitting in my garage and I'll be doing this mod soon.

[Blitzd]

yeah this is why i have a master tech doing mine.

[vxfilmer1000]

Yes ... and you will need a replacement EGR tube. I've got a 626 mani sitting in my garage and I'll be doing this mod soon.


Yes, i know about the EGR pipe. So you just re route the vaccum lines, change the egr pipe, and get new intake manifold gaskets and tb gaskets, and then jus bolt it on ?

[Bala]

Yes, i know about the EGR pipe. So you just re route the vaccum lines, change the egr pipe, and get new intake manifold gaskets and tb gaskets, and then jus bolt it on ?

That's the idea - but things are never that easy :D You also have the injectors and various electrical conections. Just take a ton of pictures before you start and label everything. This is also a great time to put in a rear motor mount if you havn't already. I'm probably forgetting a few things, but I think that's it.

[mspHtown]

http://public.fotki.com/tekkie/my_car-1/626_mani_install/


check that out. i will be installing mine this weekend and i will be following that picture how to!

thanks tekkie

[Bala]

Thanks mspHtown and good job Tekkie! (first)

[210_ZOOM]

subn

[210_ZOOM]

subn