Hello- A Little About Us

[bagman1]

Hello my name is Jason Baggie, I am the website admin. for OnlineMazdaParts.com. We are a full line Mazda and Mazdaspeed dealer.

Our policies:

SHIPPING:
Free shipping within the US (except HI and AK)on all orders over 100.00. Oversize, HI and AK and outside of the US orders are a case by case.

On orders under 100.00 frieght is as follows:
US Postal service- Variable but not to exceed 5.00
UPS- 7.50 flat fee on any order

The website is defaulted to reflect free shipping but have the knowledge that if your order is under 100.00 you will be charged a shipping charge.

I do ship anywhere as long as it can go USPS. All outside purchases are responsable for the 100% of the shipping costs. I do promise to find the fastest yet most affordable way, usually USPS 4-10 day service.

PRICING:
Our parts discount is generally a flat 20% off MSRP somethings like engines, transmissions and some convertors do not fall in this rule. Those will be a case by case pricing.

As far as body parts go. Most are going to be oversized and depending on their size will be shipped either UPS or Yellow frieght.

I can pre-paint bumpers for a 175.00 charge. I can also pre-paint other items but they will be a case by case situation.

Ordering times:
Most of the time if an item has to be ordered it will take 2-5 days for me to get it from Mazda, it all depends on the day and time that you order the item, then I will ship the item or items to you. I ship all items ordered at one time.

Hours of operation or in other words, the hours that I work:
Mon-Wed and Thurs- 7:30am to 6pm EST
Tues and Fri- 7:30am to @5:15pm EST
I do come in on Sat for about 3 hrs but there is no true schedule being that we are actually closed.

If I missed anything please don't hesitate to ask. I do my best to have a response time of under 30min but usually it will be less than that.

I look forward to hearing from you,
JMBaggie


I strive to have the best customer service possible with the fairest pricing possible.

[SlowPro98]

Werd. welcome to the forum.
So do you carry hard to find parts? 2nd Gen parts? aftermarket parts?

[zentrandi]

you might possibly be my new friend =)

[chiefmg]

Can you give me a price on the factory air dam for an '03 sedan, part #0000-86-C01-00, shipped to Zip 41018? Thanks.

[bagman1]

I hope so.

This goes for everybody,

If you ever need any help at all don't hesitate to ask that is what I am here for and I am happy to do it.

JMBaggie

[Protege52003]

nice new vendor to the boards.......

-R

[bagman1]

Werd. welcome to the forum.
So do you carry hard to find parts? 2nd Gen parts? aftermarket parts?
I am a Mazda dealer so I can get any Mazda part still offered by Mazda accessory and OE.

As for aftermarket accessories I will be starting to carry select items that I know are quality units made by known and respected manufactuers.

JMBaggie

[bagman1]

Can you give me a price on the factory air dam for an '03 sedan, part #0000-86-C01-00, shipped to Zip 41018? Thanks.

MSRP-320.00 Website-256.00 Free shipping scince it is over 100.00 and you are within the US

JMBaggie
OnlineMazdaParts.com (http://onlinemazdaparts.com)

[chiefmg]

MSRP-320.00 Website-256.00 Free shipping scince it is over 100.00 and you are within the US

JMBaggie
OnlineMazdaParts.com (http://onlinemazdaparts.com)

Sounds good. What is the best way for me to order this, when I was on your site I didn't really see an option for Protege accessories. Thanks.

[bagman1]

Sounds good. What is the best way for me to order this, when I was on your site I didn't really see an option for Protege accessories. Thanks.

WHen you go to the website on the home page you will see a box marked "search by factory part#" type in the part# you have and the rest is point and click. Be sure to log into the website before creating your cart otherwise you will loose your cart.

If you have any problems just give me a call at 704-563-1510 ext141

Thanks,
JMBaggie

[Kansei]

Gasp that's 5 dollars less than mazdastuff.com. It looks like I have a new friend for ordering oil filters and stuff like that.

:)

Welcome to the forums!

[Protege52003]

^^^^^

yeah prices are nice and site is easy to use!

-R

[ept626]

I need a price on an exhaust manifold and a hood for a 91 626 DX.

[Kansei]

I need a price on an exhaust manifold and a hood for a 91 626 DX.

Check on their web site, it has a really nice lookup feature for parts.

[ept626]

Oh I did, I couldnt find any parts for my year.

[bagman1]

I need a price on an exhaust manifold and a hood for a 91 626 DX.

Here goes:
I assumed Non-turbo

Manifold Part# F20213450 MSRP-311.75 Website-249.40
Gasket Part# F20113464 MSRP-3.85ea Website-3.08ea need 2
Gasket Part# F20113460B MSRP-10.85 Website-8.68
Gasket Part# F20140305 MSRP-7.70 Website-6.16

I would have to order all items

JMBaggie
OnlineMazdaParts.comhttp://onlinemazdaparts.com

[zentrandi]

I need a price on an exhaust manifold and a hood for a 91 626 DX.

http://www.trademotion.com/partlocator/index.cfm?action=getLocator&siteid=214264&chapter=AMH690&appSectionid=7&groupid=60513&make=22&model=626&year=1991&catalogid=1

[bagman1]

http://www.trademotion.com/partlocator/index.cfm?action=getLocator&siteid=214264&chapter=AMH690&appSectionid=7&groupid=60513&make=22&model=626&year=1991&catalogid=1


Thanks for the assist.

JMBaggie

[zentrandi]

Thats what we're here for =) We all could use all the help we can get. I feel like i should give back for all the knowlege i've taken from these forums =)

[ept626]

Thank you both for the help

[bagman1]

Thats what we are here for.:)

JMBaggie

[justanotheradikt]

hrmm...might need a few parts...

-fog light kit for msp/mp3/p5
-rear lip for 01mp3 or 03msp
-rear lip for 03.5 msp (wanna compare price)

[bagman1]

hrmm...might need a few parts...

-fog light kit for msp/mp3/p5
-rear lip for 01mp3 or 03msp
-rear lip for 03.5 msp (wanna compare price)

As for the fog light set it is not a kit but individual items:
Fog lamps Part# BN5V51680 MSRP-149.20ea Website-119.36ea
FL harness Part# BL8D51688B MSRP-47.20 Website- 37.76

MP RR skirt Part# 00008MC16 MSRP-300.00 Website-240.00 unpainted
03.5 RR skirt Part# 00008YC3100 MSRP-250.00 Website-200.00 unpainted

JMBaggie

[xelderx]

Jason...you sly dog you. Welcome to the forums. Jason is a great guy...fast driver too.

[justanotheradikt]

if i were to get you to "pre-paint" the rear lip black mica for me (16A i think is the paint code but may be wrong) how much would that put on top of the lip?

[bagman1]

if i were to get you to "pre-paint" the rear lip black mica for me (16A i think is the paint code but may be wrong) how much would that put on top of the lip?

To have it painted for you it would be @115.00

JMBaggie

[bagman1]

Jason...you sly dog you. Welcome to the forums. Jason is a great guy...fast driver too.


Good to hear from you. I'm going club racing this year.

JMBaggie

[flat_black]

How much for a set of 1999 Millenia S front caliper brackets? =) I have the calipers and rotors, all ready to be test-mounted to a Protege, just need the brackets.

[Iceman112k3]

Hrrm I'm having trouble finding the specefic part on your website....

I'm looking for:
Power Window switch surround (left adn right)
SHifter surround with cup holders, 2 peice w/ lid
Stereo surround

[bagman1]

Hrrm I'm having trouble finding the specefic part on your website....

I'm looking for:
Power Window switch surround (left adn right)
SHifter surround with cup holders, 2 peice w/ lid
Stereo surround

You might find this goofy but...... can you send me the last 8 digits of your VIN# so I can get the correct part#'s for you.

JMBaggie

[bagman1]

How much for a set of 1999 Millenia S front caliper brackets? =) I have the calipers and rotors, all ready to be test-mounted to a Protege, just need the brackets.

Sorry it took so long to get your answer for you.

Part# TA0133281 MSRP-98.05ea Website-78.44ea

I would have to order them.

JMBaggie

[chiefmg]

I went to your site, created an account and ordered the Protege air dam. Just checked on my order status, and it says there are no current orders for my account. Does it take some time for an order to show up, or do I in fact not have one? Account is under Michael Green. Please let me know about this, I just don't want to order two of them.

[bagman1]

I went to your site, created an account and ordered the Protege air dam. Just checked on my order status, and it says there are no current orders for my account. Does it take some time for an order to show up, or do I in fact not have one? Account is under Michael Green. Please let me know about this, I just don't want to order two of them.

The order will usually go through immediately. You will receive an order confirmation # when it is successful.

I do apologize for the inconvienance,
JMBaggie

[chiefmg]

The order will usually go through immediately. You will receive an order confirmation # when it is successful.

I do apologize for the inconvienance,
JMBaggie

I just placed the order again, this time I got the review screen and a confirmation number (as well as an e-mail). Hopefully that means it was successful. Just please make sure that you don't send me two air dams!!

No inconvenience, we are all learning and I just want to make sure others can benefit from my experience. Seems it is best to create the account first separately, and then order your parts (first time I did it by placing the order and then setting up the account).

Based upon what I have seen so far, your firm is going to do well on here. Great communication and service. Everyone spread the word!

[bagman1]

I just placed the order again, this time I got the review screen and a confirmation number (as well as an e-mail). Hopefully that means it was successful. Just please make sure that you don't send me two air dams!!

No inconvenience, we are all learning and I just want to make sure others can benefit from my experience. Seems it is best to create the account first separately, and then order your parts (first time I did it by placing the order and then setting up the account).

Based upon what I have seen so far, your firm is going to do well on here. Great communication and service. Everyone spread the word!

Yes the order went through this time. I will process it tomorrow the part will ship later this week. I don't know if I metioned this ealier this item comes from Mazda unpainted. If you would like I can see how much it would be to have it painted for you before it ships. It is usually vey affordable compaired to body shop, just thought I would let you know.

Thanks for this opprotunity I look forward to many more,
JMBaggie

[Antoine]

Jason has has been great...Very professional and courteous!

I've gone ahead and stickied this intro thread for you...(thumb)

[chiefmg]

Yes the order went through this time. I will process it tomorrow the part will ship later this week. I don't know if I metioned this ealier this item comes from Mazda unpainted. If you would like I can see how much it would be to have it painted for you before it ships. It is usually vey affordable compaired to body shop, just thought I would let you know.

Thanks for this opprotunity I look forward to many more,
JMBaggie

Thanks. I will be putting my car into the body shop soon to get some damage repaired so I won't need the air dam painted. I already have the rest of the factory body kit, I am going to have it all painted at the same time so things match.

I own nothing but Mazdas, so if this transaction continues smoothly you will definitely be getting more business from me.

[xelderx]

I registered an account Jason. I'll need a few interior panels pretty soon. I recieved the email from the website, but it is complete gibberish. I'm not sure what it is supposed to say, but if it doesn't tell me anything important I'm not really worried about it. I'll be contacting you soon.

[bagman1]

Jason has has been great...Very professional and courteous!

I've gone ahead and stickied this intro thread for you...(thumb)

Thanks Antoine. So far a very warm introduction from the members, makes me know for sure that I made the right choice.

Thanks again,
JMBaggie

[bagman1]

I registered an account Jason. I'll need a few interior panels pretty soon. I recieved the email from the website, but it is complete gibberish. I'm not sure what it is supposed to say, but if it doesn't tell me anything important I'm not really worried about it. I'll be contacting you soon.

All the gibberrish was saying is that you registered with the website. But just to make sure try logging in and make sure that all your info is there. If you have any problems don't hesitate to cantact me.

When you are ready I will be here.
JMBaggie

[romecandleboy]

Jason is a great vendor. He's been helping people out alot on www.miata.net (http://www.miata.net) , and I was wondering when he'd show up here. Keep up the good work !

[bagman1]

Jason is a great vendor. He's been helping people out alot on www.miata.net (http://www.miata.net) , and I was wondering when he'd show up here. Keep up the good work !

I thank you for the kind words. I will strive to deserve them.

JMBaggie

[D-rock240]

Very nice. Question about the strut kit special on the website, what type of struts specifically are they (tokico blues?) I am looking to upgrade my struts soon and I didn't see it listed under more info.

[jflo]

aiya, i just cancelled my order. think i'm gonna have to go to the dealership for this one.

hmm...perhaps i will order something later...that website is very useful.

[bagman1]

Very nice. Question about the strut kit special on the website, what type of struts specifically are they (tokico blues?) I am looking to upgrade my struts soon and I didn't see it listed under more info.


The strut kits listed on the website are the tokico blues.

JMBaggie

[bagman1]

aiya, i just cancelled my order. think i'm gonna have to go to the dealership for this one.

hmm...perhaps i will order something later...that website is very useful.

No problem. If there is anything I can ever be of assistance with for you don't hesitate to ask.

JMBaggie

[martinmzfan]

I placed an order from OnlineMazdaParts.com (bagman1) last month and recieved top-notch customer service, advice and order fulfillment. In fact, JMBaggie went above and beyond assisting me in a little parts troubleshooting. Fast and accurate responses to all questions -- by email and phone. I would order from him again. (cool)

[Kooldino]

Are all of the parts listed here brand new parts?

And it's Free Shipping on anything over $100?

So for an MSP fender...

W/mps option Right - Sedan 01-03 $219.99 $175.99
It would be $176 shipped?

[bagman1]

Are all of the parts listed here brand new parts?

And it's Free Shipping on anything over $100?

So for an MSP fender...

W/mps option Right - Sedan 01-03 $219.99 $175.99
It would be $176 shipped?

All parts listed on the website are brand new unless otherwise stated. All parts listed are Mazda parts and Accessories unless otherwise stated.

All orders of over 100.00 are free shipping unless the item is oversized and or heavywheight or being shipped outside the US. HI and AK are also case by case freight.

As for the fender in question that would be free shipping.

JMBaggie

[vindication]

wow, just noticed this new section and have been reading up on this thread. Looks like there is some top notch customer service. I will be signing onto your site soon enough. In the meantime, can I get a price quote for the two front wheel well splash guards? I'm debating on whether to just fix mine or get new ones, thanks.

[bagman1]

wow, just noticed this new section and have been reading up on this thread. Looks like there is some top notch customer service. I will be signing onto your site soon enough. In the meantime, can I get a price quote for the two front wheel well splash guards? I'm debating on whether to just fix mine or get new ones, thanks.

I assuming the black plastic lining of the fenders.
Rt side Part# B30D56131A MSRP-25.30 Website-20.24
Lt side Part# B30D56141A MSRP-47.79 Website-38.23

If you need any of the fasteners they are
Part# BC1D56145 MSRP-1.10ea Website- .88ea total for both sides is 23

These are without VIN#. There was a VIN split in 01 to make sure that these are the ones you need I would need the last 8 digits of your VIN.

I do have these items listed in stock.

JMBaggie

[vindication]

cool thanks, if I decide to in fact get these I will get you my vin to make sure. Thanks.

[bagman1]

Anytime,

JMBaggie
OnlineMazdaParts.com (http://onlinemazdaparts.com)

[Kooldino]

I couldn't find a price for 2.0L Protege ignition coils on your site...could you get me a quote?

[tsunami]

nice heated side mirror kit for the 3... i know what i want for an early christmas present...

[bagman1]

I couldn't find a price for 2.0L Protege ignition coils on your site...could you get me a quote?

Part# FP8518100C MSRP-84.95ea Website-67.96ea
I do have these in stock.

JMBaggie

[bagman1]

nice heated side mirror kit for the 3... i know what i want for an early christmas present...

These are literally a plug and polay item on the Mazda3 any year and all models that have electric mirrors.

JMBaggie

[Hellnightkid]

i think i need a 2002 sedan trunk mat...please let me know.

[bagman1]

i think i need a 2002 sedan trunk mat...please let me know.

Part# B25D6881XA04 MSRP-86.70 Website-69.36

This does not come with the board underneath.

JMBaggie

[Foolish]

PM'd you a question, Bagman. N/M, clearly you got it! Thanks!

[bagman1]

PM'd you a question, Bagman.


PM'ed you the answer. :)

JMBaggie

[snowblazin]

Very cool site! I was trying to find the entire radio bezel and shift plate trim w/o cupholders for an 03 protege5. TIA!
- Justin

[bagman1]

Very cool site! I was trying to find the entire radio bezel and shift plate trim w/o cupholders for an 03 protege5. TIA!
- Justin


So you want the shift panel with the flip door on it correct. Because both have cupholders in them just the one with the flip door you can't see them.

JMBaggie

[Kansei]

Very cool site! I was trying to find the entire radio bezel and shift plate trim w/o cupholders for an 03 protege5. TIA!
- Justin

Are yours scratched up like mine are?

[snowblazin]

So you want the shift panel with the flip door on it correct. Because both have cupholders in them just the one with the flip door you can't see them.

JMBaggie
The 03 is the one without the flip panel, I just didn't know if you could order them w/o the cupholders attached(they just screw on) because my cupholders themselves are fine, the shiftplate itself is scratched. And yea Chris, they're scratched to shit...

[bagman1]

The 03 is the one without the flip panel, I just didn't know if you could order them w/o the cupholders attached(they just screw on) because my cupholders themselves are fine, the shiftplate itself is scratched. And yea Chris, they're scratched to shit...


On that piece you have to get the whole assy. It MSRP's @86.00. To be sure that I Quote the right one, could you send me the last 8 digits of your VIN# I can get you the correct info.

JMBaggie

[snowblazin]

I'm workin now so I can't get the vin yet, but the whole assembly is fine. It's the silver plastic piece that surrounds the shifter and cupholders, without the flip-up lid. And the radio surround bezel w/ the fake carbon fiber. I'll pm you the vin, but I won't be out till 7:30 tonight. Thanks again!

[bagman1]

I'm workin now so I can't get the vin yet, but the whole assembly is fine. It's the silver plastic piece that surrounds the shifter and cupholders, without the flip-up lid. And the radio surround bezel w/ the fake carbon fiber. I'll pm you the vin, but I won't be out till 7:30 tonight. Thanks again!

Then I'll pm you the part#'s and pricing first thing in the morning.

JMBaggie

[zentrandi]

how much to pre-paint all these?

0000-86-C01-00 Sedan Front Lip
B30K-V4-910F Side Skirts
0000-8M-C16 MP3 Rear Skirt

emerald green?

[bagman1]

how much to pre-paint all these?

0000-86-C01-00 Sedan Front Lip
B30K-V4-910F Side Skirts
0000-8M-C16 MP3 Rear Skirt

emerald green?

If all where done at the same time @300.00
If they where done one at a time @130.00ea

JMBaggie

[snowblazin]

Dammit, I forgot to check my VIN last night. I'll try to remember when I go out for lunch...

[bagman1]

Dammit, I forgot to check my VIN last night. I'll try to remember when I go out for lunch...

I'll be here til 6pm EST tonight or I'll answer later tonight.

JMBaggie

[zentrandi]

If all where done at the same time @300.00
If they where done one at a time @130.00ea

JMBaggie


thanks

[bagman1]

thanks

Anytime.

JMBaggie

[justanotheradikt]

seeing if you can get the foglight delete covers...

part numbers:

B32E-50-C21
and
B32E-50-C11

[Bigg Tim]

Part# FP8518100C MSRP-84.95ea Website-67.96ea
I do have these in stock.

JMBaggie

This P/N must be worng, I bought new 2.0l coils form my local dealership and they were like 23-26 bucks. They tried to give me a differnt P/N but they found the correct one. I will see if I still have the boxes to give you the correct one.

I do love the site though, you beat everyone else's price and I will be ording some tranny parts from you very shortly!

[khaosman]

Any one know the part numbers for the locking nuts in the transmission, and the oil seals on the differential? The differential is from a MSP, if it matters.

[zentrandi]

question?

which one is the sedan exhaust?

0000-8M-C09
or
0000-8M-C10

[bagman1]

This P/N must be worng, I bought new 2.0l coils form my local dealership and they were like 23-26 bucks. They tried to give me a differnt P/N but they found the correct one. I will see if I still have the boxes to give you the correct one.

I do love the site though, you beat everyone else's price and I will be ording some tranny parts from you very shortly!

Did you need the coils or just the spark plug boots on the bottom of the coils, because the boots are only @25.00ea.

JMBaggie

[bagman1]

Any one know the part numbers for the locking nuts in the transmission, and the oil seals on the differential? The differential is from a MSP, if it matters.

Main shaft nut
F52017628 MSRP-17.50 Website-14.00
Secondary shaft
F52117628A MSRP-16.35 Website-13.08
Seals
F00327238B MSRP-6.35ea Website-5.08ea

I do have all items listed in stock

JMBaggie

[bagman1]

question?

which one is the sedan exhaust?

0000-8M-C09
or
0000-8M-C10


00008MC09 is for the 4dr. C10 is 5dr.

I would have to order either one.

JMBaggie

[bagman1]

I apologize for not answering these questions last night but after a 12hr day I just went home and sat on the couch.

JMBaggie

[bagman1]

seeing if you can get the foglight delete covers...

part numbers:

B32E-50-C21
and
B32E-50-C11

I would have to order these,

B32E50C21 MSRP-25.00 Website-20.00
B32E50C11 MSRP-25.00 Website-20.00

JMBaggie

[justanotheradikt]

is there any way you have a diagram of them? want to make sure its the right thing.

[bagman1]

is there any way you have a diagram of them? want to make sure its the right thing.

Here you go

http://i3.tinypic.com/vrzzmg.jpg


JMBaggie
OnlineMazdaParts.com (http://onlinemazdaparts.com)

[justanotheradikt]

yup thats them.... the guy im getting my dg lip from has some...and he is deciding if he is going to reinstall them or not...if he keeps them i will be ordering from you.

you said you have to order them, about how long would that take? like the usual week or so?

[bagman1]

yup thats them.... the guy im getting my dg lip from has some...and he is deciding if he is going to reinstall them or not...if he keeps them i will be ordering from you.

you said you have to order them, about how long would that take? like the usual week or so?


@2-4 days to me then shipped to you.

JMBaggie

[justanotheradikt]

ok man...thanks for the info! ill get back wtih ya if i need it!

[Yaggie1]

Both of my fog lights are cracked. How much for replacements on a 03 P5 ?

[Bigg Tim]

Did you need the coils or just the spark plug boots on the bottom of the coils, because the boots are only @25.00ea.

JMBaggie

I don't need the coils. Here is the P/N that was on the box that my coils came in. The coil came WITH the boot on the end of it.

FFY1-18-100 Mazda 2.0liter coils. The same coils on all 2001+ 2 liter FS-DE motor's. KICK ASS PRICE BTW!!!!! You'll be getting a ton of business from here with prices like that!!!!

FFY118100 $14.55 (MSRP) $12.37 (Online)
Electrical - Ignition system - Ignition coil
Ignition coil - 2.0 liter 2001 - 2002

FFY118100 $14.55 (MSRP) $12.37 (Online)
COIL,IGNITION

[bagman1]

Both of my fog lights are cracked. How much for replacements on a 03 P5 ?

Part# BN5V51680 MSRP-149.20ea Website-119.36ea

JMBaggie

[khaosman]

Main shaft nut
F52017628 MSRP-17.50 Website-14.00
Secondary shaft
F52117628A MSRP-16.35 Website-13.08
Seals
F00327238B MSRP-6.35ea Website-5.08ea

I do have all items listed in stock

JMBaggie

Awesome, thanks! One last part, the light that illuminates the cargo area in the Protege5s. It is in driver's side panel, by the wheel well.

[bagman1]

Awesome, thanks! One last part, the light that illuminates the cargo area in the Protege5s. It is in driver's side panel, by the wheel well.


Part# BN0C51440A MSRP-33.45 Website-26.76
I would have to order it.

JMBaggie

[khaosman]

Part# BN0C51440A MSRP-33.45 Website-26.76
I would have to order it.

JMBaggie

Cool. I'll wait on that one as it isn't important :)

[tsunami]

got a quick question, i was searching your site and found the 02 sensors for the mazda3 have a california listing for the 2.0 only and the 2.3l does not have a california option. i am pretty sure living in maine i have the cali emissions system on my car and just want to clarify before i order... it would be the post cat sensor btw...

thanks

[bagman1]

got a quick question, i was searching your site and found the 02 sensors for the mazda3 have a california listing for the 2.0 only and the 2.3l does not have a california option. i am pretty sure living in maine i have the cali emissions system on my car and just want to clarify before i order... it would be the post cat sensor btw...

thanks

All the 2.3L Mazda3's are 50 state, that is why you do not see a CA emission option on the 2.3L.
The O2 sensor you will need is L3A118861A9U MSRP-92.45 Website-73.96
I will have to order said item. If you place your order by 5:30pm EST it will ship out to you on Friday.

JMBaggie

[chiefmg]

Just received my front air dam, and wanted to post to let everyone know my experience. I ordered the part last week. Late in the week Jason called to tell me the first air dam they received from Mazda had been returned from another dealer, so they opened it to check on things and found it was not a complete kit. They went ahead and ordered another one for me. I received notification of shipping on Monday and got the part today. Not only was everything in order, but they included a very nice 2006 Mazdaspeed calendar as well.

This was one of the best experiences in buying online that I have had. Jason goes the extra mile and then some. The calendar was an especially nice touch. Thanks Jason. You will definitely be getting more of my business.

[bagman1]

I am glad that everything is to your satisfaction. I will strive to earn the kinds words that you have bestowed upon me.

Please don't hesitate if you ever need anything,
JMBaggie

[tekkie]

Part# BN5V51680 MSRP-149.20ea Website-119.36ea

JMBaggie

is this the same as the MSP one? one of my is broke also :(

[bagman1]

is this the same as the MSP one? one of my is broke also :(

Yes it is the same.

JMBaggie

[tekkie]

cool thats what I thought but wanted to be sure, I will have to order one of these shortly

[bagman1]

cool thats what I thought but wanted to be sure, I will have to order one of these shortly

I usually carry 1 in stock.

JMBaggie

[Amarek]

interested in a rear wiper motor for an 02 protege 5 shipped to Arnprior Ontario Canada thanks

[bagman1]

interested in a rear wiper motor for an 02 protege 5 shipped to Arnprior Ontario Canada thanks

Part# B25H67450B MSRP-158.50 Website-126.80 10.00 shipping to Canada. I would have to order it. I ship all my small items to Canada Via US Postal Service. Figure 2-4 days for me to get it then 4-10 working days for it to get to you.

JMBaggie

[BlazingCopper6]

Had to catch up on my reading. Glad to see you made it here Jason. Awesome customer service you cant go wrong with ordering parts through him !

Thanks again
Sean

[98b/w pro]

finaly ordered an oil pan.
woot.
15 more than a used one.
Anyway you could get me a new z5(1.5l) longblock/shortblock btw?

[bagman1]

For a new 1.5L long block:
MSRP-4683.90 Website-4000.00 plus shipping. 20.00 for the needed gaskets.

I am having trouble finding a used one.

your pan will ship out to you on Wed.

Thanks,
JMBaggie

finaly ordered an oil pan.
woot.
15 more than a used one.
Anyway you could get me a new z5(1.5l) longblock/shortblock btw?

[98b/w pro]

i can get a msp long block for that. or a newer car.or 2 bps
thanks for looking though.
damn thats alot.

[bagman1]

i can get a msp long block for that. or a newer car.or 2 bps
thanks for looking though.
damn thats alot.

I wasn't going to say anything, but that was my thought too.

JMBaggie

[aristos]

I have a Mazda Persona 2.0 manufactured in 1988 which is unique in Cyprus and the official dealer in Cyprus did not provide it so he has no information for this model.
can u help me to find parts of it or to buy a same and bring it in cyprus as parts and not as a registered one?

[bagman1]

All I can probably help you with are engine and trans parts and the possibility that some these items are a little different is high.

If you have a carburated engine look up your engine parts as a 87 B2000 truck and your trans misson stuff as a 86 626. If yours is an EFI look all your parts up as a 86 626. These should be as close to identical to your components as I can get.

I hope this helped,
JMBaggie
OnlineMazdaParts.com (http://onlinemazdaparts.com)

[Amarek]

Hello bagman Unfortunately I have a small issue. I ordered a rear windshield wiper motor online last week. But when I checked the order status today it is non-existent. I thought everything was cool but a day after I ordered it my computer blew up (psu fried itself) so I can't retrieve any information from it and I finally got a new computer yesterday.

Basically i am asking if I have an order on record or shall I order another one

[bagman1]

I never received an order for a rear wiper motor. So please redue your order.

If you have continued issue please give me a call or PM me your phone # and I will call you. If you do not get a confirmation # your order didn't go through.

I do apologize for the inconvienence,
JMBaggie
OnlineMazdaParts.com (http://onlinemazdaparts.com)

[98b/w pro]

Wow the drain plug was included to. the dealship wanted another 5 bucks for it. you rule in so many ways.

[Matt5]

HI,
do you ship to Canada? What shipping do you use? (please don't say ups...). Looking for some Mazda 5 accessories (Soft Cargo liner (#0000-8K-L06), cargo net (#0000-8K-L04) and all weather mat set (0000-8B-L25). How much would typical shipping be?

Thanks!

Matt

[bagman1]

HI,
do you ship to Canada? What shipping do you use? (please don't say ups...). Looking for some Mazda 5 accessories (Soft Cargo liner (#0000-8K-L06), cargo net (#0000-8K-L04) and all weather mat set (0000-8B-L25). How much would typical shipping be?

Thanks!

Matt

I do ship to Canada. I use US Postal Service for shipment. On these items the quotes that I am going to give you are skewed to the high side.

Liner- @24.00
Net- @15.00
AWM- @35.00

If these items can be packaged together it will probably save on the freight, but if shipped seperately the pricing quoted is a good estimate.

JMBaggie

[98b/w pro]

never mind. im dumb as hell.

[Iceman112k3]

Just inquiring about some parts and prices:

B28V-39-800B engine mount member (from automatic FWD FS-DE cars)
B28V-39-990 roll damper (from AT FWD FS and AT & MT 4WD FS-ZE cars)
GJ21-34-031 nut (from AT FWD FS and AT & MT 4WD FS-ZE cars)
BJ3A-39-050C #2 engine mount (from European RF turbo diesel cars)
B29A-39-020A #2 engine mount bracket (from AT & MT 4WD FS-ZE cars)
BP7H-39-06Y #3 Engine mount from mazdaspeed

[bagman1]

Just inquiring about some parts and prices:

B28V-39-800B engine mount member (from automatic FWD FS-DE cars)
B28V-39-990 roll damper (from AT FWD FS and AT & MT 4WD FS-ZE cars)
GJ21-34-031 nut (from AT FWD FS and AT & MT 4WD FS-ZE cars)
BJ3A-39-050C #2 engine mount (from European RF turbo diesel cars)
B29A-39-020A #2 engine mount bracket (from AT & MT 4WD FS-ZE cars)
BP7H-39-06Y #3 Engine mount from mazdaspeed

If in order of items requested
1- 123.65---98.92
2- 74.05---59.24
3- 2.50---2.00
4- Not available in the US
5- Not available in the US
6- 168.90---135.13

I would have to order any of the items listed above.

Thanks,
JMBaggie

[hondasi88]

how much for a 2001 mazda mp3 rear bumper?

[bagman1]

how much for a 2001 mazda mp3 rear bumper?

Part# BJ0J502218J MSRP-235.75 Website-188.60

This bumper comes unpainted. I can have it painted for 175.00. UPS considers this to be an oversized item so figure 35-55 in shipping, depending on where you live.

Thanks,
JMBaggie

[slate1]

Can you tell me what I would need to install defrosting mirrors on my US-Spec 2006 Mazda3-GT Sedan? It's my understanding that the wiring is all there - you just need the proper mirror. Once installed - they would defrost when the rear defroster is activated.

Looking at your site, I can find the glass: Exterior Glass with Defroster (http://www.trademotion.com/partlocator/index.cfm?action=getLocator&siteid=214264&chapter=ARH5417&appSectionid=2732&groupid=2740&subgroupid=2581&componentid=2413&make=22&model=3&year=2006&catalogid=2) and I can find something under "Mirror Assembly" (no price listed though): Mirror Assy with Defroster (http://www.trademotion.com/partlocator/index.cfm?action=getLocator&siteid=214264&chapter=ARH5417&appSectionid=2732&groupid=2740&subgroupid=3455&componentid=4432&make=22&model=3&year=2006&catalogid=2)

Would I just need to replace the glass in my existing assembly? Any help would be greatly appreciated.

[bagman1]

Can you tell me what I would need to install defrosting mirrors on my US-Spec 2006 Mazda3-GT Sedan? It's my understanding that the wiring is all there - you just need the proper mirror. Once installed - they would defrost when the rear defroster is activated.

Looking at your site, I can find the glass: Exterior Glass with Defroster (http://www.trademotion.com/partlocator/index.cfm?action=getLocator&siteid=214264&chapter=ARH5417&appSectionid=2732&groupid=2740&subgroupid=2581&componentid=2413&make=22&model=3&year=2006&catalogid=2) and I can find something under "Mirror Assembly" (no price listed though): Mirror Assy with Defroster (http://www.trademotion.com/partlocator/index.cfm?action=getLocator&siteid=214264&chapter=ARH5417&appSectionid=2732&groupid=2740&subgroupid=3455&componentid=4432&make=22&model=3&year=2006&catalogid=2)

Would I just need to replace the glass in my existing assembly? Any help would be greatly appreciated.

Go to the website click on accessory catalog, Mazda3, audio/visual and electronics and you will see a listing for side mirror kit (very last item listed) for 200.00. These are factory Mazda mirrors so I will need your paint color because they will come pre-painted.

If you have any problems just give me a call at 704-563-1510 ext 141

JMBaggie

[SIBalla23]

Hi, i need part numbers and prices for these parts. This is for a 2002 mazda protege es, automatic, color is black mica.
1. door lock switch
2. mp3 sideskirts
3. mp3 rear bumper skirt
4. mazda front air dam
5. exhaust gasket that goes between the midpipe and resonater pipe
6. exhaust gasket that goes between the exhaust manifold and precat
7. exhaust gasket that goes between the downpipe(pipe that has precat) and midpipe(pipe with 2nd cat)
8. mp3 spoiler
Can you also include the prices to paint each individual body part. Thanks

[bagman1]

Hi, i need part numbers and prices for these parts. This is for a 2002 mazda protege es, automatic, color is black mica.
1. door lock switch
2. mp3 sideskirts
3. mp3 rear bumper skirt
4. mazda front air dam
5. exhaust gasket that goes between the midpipe and resonater pipe
6. exhaust gasket that goes between the exhaust manifold and precat
7. exhaust gasket that goes between the downpipe(pipe that has precat) and midpipe(pipe with 2nd cat)
8. mp3 spoiler
Can you also include the prices to paint each individual body part. Thanks

Items will be listed in order of request. Sorry for the delay in reply my home computer crapped yesterday.

1- BJ0E66660A65 MSRP-35.35 Website- 28.28
2- B30KV4910F MSRP-225.00 Website-180.00 20.00 in shipping due to being oversized. Figure @150.00 for paint on the highside.
3- 00008MC16 MSRP-300.00 Website-240.00 20.00 in shipping due to being oversized. Figure @125.00 for paint on the highside.
4- 000086C0200 MSRP-250.00 Website-200.00 20.00 in shipping due to being oversized. Figure @125.00 for paint on the highside.
5- FSB840305 MSRP-7.70 Website-6.16
6- ZM0120520 MSRP-17.25 Website-13.80
7- BP4840581A MSRP-16.75 Website-13.40
8- 00008YC05A00 MSRP-339.00 Website-271.20 20.00 in shipping due to being oversized. Figure @125.00 for paint on the highside.

Figure 2-4 days on me to get the parts once you order them, then figure 1-3 days to have them painted. The paint charges should be cheaper if we do more than 1 item at a time.

I thank you for this opprotunity,
JMBaggie

[ssupra96]

how much for the plastic pipe from the turbo to the intercooler on a 03msp?

[bagman1]

how much for the plastic pipe from the turbo to the intercooler on a 03msp?

Part# 000088C57 MSRP-221.65 Website-177.32

JMBaggie

[ssupra96]

Part# 000088C57 MSRP-221.65 Website-177.32

JMBaggie

thanxs, that was quick... what about shipping, im located in northern va.

[bagman1]

thanxs, that was quick... what about shipping, im located in northern va.

Scince it over 100.00 and you live within the US there will be no shipping charge.

JMBaggie

[xbbmazda]

Scince it over 100.00 and you live within the US there will be no shipping charge.

JMBaggie


Nice!! (burnout)

[xbbmazda]

How much for a stock radio for a 05 P5?

[steve_protege]

How much for a 2000 Mazda Protege DX stock rear bumper? Shipped to FL with zip 33511. Thanks.

[bagman1]

How much for a stock radio for a 05 P5?

If possible can you PM me the last 8 digits of your VIN#

JMBaggie

[bagman1]

How much for a 2000 Mazda Protege DX stock rear bumper? Shipped to FL with zip 33511. Thanks.


Part# BJ0J502218J MSRP-235.75 Website-188.60 shipping would be 35.00. I can have it painted for you for an additional 175.00

I do have it in stock.

JMBaggie

[VA03Speed]

This vendor is quick and responsive when they are asked questions. I like that. Welcome to the board.

[bagman1]

This vendor is quick and responsive when they are asked questions. I like that. Welcome to the board.

I do my best. It has been a pleasure being here, I look forward to being here as long as I can.

JMBaggie

[steve_protege]

Part# BJ0J502218J MSRP-235.75 Website-188.60 shipping would be 35.00. I can have it painted for you for an additional 175.00

I do have it in stock.

JMBaggie

Not bad, not at all. Was free shipping only good for a limited time? Ill probably get the bumper unpainted. How long would it be before bumper arrived to me in FL with zip 33511?

[bagman1]

Not bad, not at all. Was free shipping only good for a limited time? Ill probably get the bumper unpainted. How long would it be before bumper arrived to me in FL with zip 33511?

Free shipping does not apply to oversized items.
Figure 2-3 days for UPS from NC.

JMBaggie

[98b/w pro]

Can i get a price and part number for a 98 trunk liner and 4 door silld. Who steals a trunk liner and door sills.

[bagman1]

Can i get a price and part number for a 98 trunk liner and 4 door silld. Who steals a trunk liner and door sills.

The trunk mat:
Part# BD0G6881XB04 MSRP-121.45 Website-97.16

For the door sills are we talking the scuff plates for alll 4 doors? If so what color is your interior?

JMBaggie

[98b/w pro]

damn 100 for a mat.
and yeah i guess scuff plates would be the correct term. and I'd want them in black.
thanks btw

[bagman1]

damn 100 for a mat.
and yeah i guess scuff plates would be the correct term. and I'd want them in black.
thanks btw

Just a picture to make sure.

http://i1.tinypic.com/xm1zs5.jpg

They are only available in Dark Grey and Brown
Front scuff plates:
MSRP-20.45 ea Website- 16.36ea
Rear scuff plates
MSRP-13.70ea Website-10.96ea

JMBaggie

[98b/w pro]

okay i was just hopping they came in black so iwoulnt have to paint mine again. You'll probaly be getting another order from me in like a week or two.

[bagman1]

okay i was just hopping they came in black so iwoulnt have to paint mine again. You'll probaly be getting another order from me in like a week or two.

Whenever you're ready I'll be here.

JMBaggie

[justanotheradikt]

hey man...wondering about these parts

Header: QBJ1-13-450
Clip: B214-34-C10
Clip: E356-18-141
O2 sensor: FS9P-18-861
Coupler bracket: FS9P-18-998
Bolt (set of 9): 9979-40-612
Heat shield: FS9P-13-392B

also this
B30L-V7-050 foot lamp

[bagman1]

hey man...wondering about these parts

Header: QBJ1-13-450
Clip: B214-34-C10
Clip: E356-18-141
O2 sensor: FS9P-18-861
Coupler bracket: FS9P-18-998
Bolt (set of 9): 9979-40-612
Heat shield: FS9P-13-392B

also this
B30L-V7-050 foot lamp

In order of your items
1- Available from Mazdaspeed motorsports only
2- MSRP-1.60ea Website-1.28ea
3- MSRP-2.20ea Website-1.76ea
4- Japan Market part
5- Japan Market part
6- MSRP-1.35ea Website-1.08ea
7- Japan Market part
8- Japan market accessory, I can't even begin to touch this one.

On the Japan market parts I can probably get them but it could take upwards of a month to get them. I cannot however get any Japan market accessories.

JMBaggie

[justanotheradikt]

would you be able to get the header?

[bagman1]

would you be able to get the header?

Regretfully I can't get the header at all. Dealers don't have access to Mazdaspeed Motorsports at all.

JMBaggie

[justanotheradikt]

damn. that sucks

[98b/w pro]

dude just regiser your car with them and go to two auto cross. Plus you get a nice deal on replacement auto parts like cv joints.I break mine alot.;(

[justanotheradikt]

need the gasket taht goes under the valve cover... dont know a part number. ive got a 2003 2.0l.
thanks!

[bagman1]

need the gasket taht goes under the valve cover... dont know a part number. ive got a 2003 2.0l.
thanks!

Part# FSD710235 MSRP-31.85 Website-25.48

I got plenty in stock

JMBaggie

[steve_protege]

Free shipping does not apply to oversized items.
Figure 2-3 days for UPS from NC.

JMBaggie


Okay. Let me think it over and Ill contact you in a couple days or so and let you know what Im gonna do. Thanks.

[justanotheradikt]

ill be ordering that gasket when i get a chance to sign up on the website...prob tonight or tomorrow afternoon.

dealership here wanted 38.20 for it.

[khaosman]

I need the brake pad shim/backing thingies for an '02 P5. Unless new pads usually come with them (Axxis Ultimates).

Thanks :D

[bagman1]

I need the brake pad shim/backing thingies for an '02 P5. Unless new pads usually come with them (Axxis Ultimates).

Thanks :D

Part# GAYR3329ZA website price 6.89. I would have to order them.

JMBaggie

[steve_protege]

Okay. Let me think it over and Ill contact you in a couple days or so and let you know what Im gonna do. Thanks.

I have my response for you. I think Im going to get it from Ebay. I can actually get it for (hopefully) less than 100.00!!! So that would be great. Thanks for trying to help me out. Its appreciated.

On another note, you still might be able to help me out. What kind of price am I looking at for a replacement radiator support for the 2000 Protege sedan? I don't have the part # with me right now, but can get it if you need it. A body shop I went to wants to charge me 513.00 for the piece(s) plus install. Thanks.

[bagman1]

I have my response for you. I think Im going to get it from Ebay. I can actually get it for (hopefully) less than 100.00!!! So that would be great. Thanks for trying to help me out. Its appreciated.

On another note, you still might be able to help me out. What kind of price am I looking at for a replacement radiator support for the 2000 Protege sedan? I don't have the part # with me right now, but can get it if you need it. A body shop I went to wants to charge me 513.00 for the piece(s) plus install. Thanks.


Part# ZL0415200B MSRP-238.95 Website-191.16 I do have it in stock.

JMBaggie

[justanotheradikt]

can you tell me what body this grill goes to?

B30P-50-710

i think they replaced with the wrong one.

[bagman1]

can you tell me what body this grill goes to?

B30P-50-710

i think they replaced with the wrong one.

If my memory is correct that is a P5 grille.

JMBaggie

[justanotheradikt]

thats what i thought...do you know if they are the same as a msp filter? other than the chrome M vs. satin M?

like are they the same shape?

[bagman1]

thats what i thought...do you know if they are the same as a msp filter? other than the chrome M vs. satin M?

like are they the same shape?

If my memory is working the way it should be, The are the same except that the MSP ebrow is painted to match the rest of the car and I think the mesh is of a different design.

JMBaggie

[Kansei]

If my memory is working the way it should be, The are the same except that the MSP ebrow is painted to match the rest of the car and I think the mesh is of a different design.

JMBaggie

Mesh is the same, the M is chrome, the top bar is just black.. but your car is black so it's fine.

[brouhaha]

Greetings. Can you tell me if the front door outer panel on the passenger side would be an oversize item or would it qualify for free shipping? Thanks!

[flat_black]

Just ordered those brackets. Order number: 13568155

I did make a comment to make sure that the left/right side were the same part number. =)

[bagman1]

Greetings. Can you tell me if the front door outer panel on the passenger side would be an oversize item or would it qualify for free shipping? Thanks!

The door skin qualifies for free shipping.

JMBaggie

[bagman1]

Mesh is the same, the M is chrome, the top bar is just black.. but your car is black so it's fine.


Yeah what he said! :) :)

JMBaggie

[justanotheradikt]

hey...so i was going to go ahead and order that gasket and also wanted to get the front weather strip for under the hood on a 2003 2.0l protege. in the diagram i was looking at it says #6 is the strip and #7 are the clips...how many clips to i need to install it? also what is #8? i want everything i need to put that front weather strip on.
thanks!

[bagman1]

hey...so i was going to go ahead and order that gasket and also wanted to get the front weather strip for under the hood on a 2003 2.0l protege. in the diagram i was looking at it says #6 is the strip and #7 are the clips...how many clips to i need to install it? also what is #8? i want everything i need to put that front weather strip on.
thanks!

If you order the weatherstrip assy all the clips come with.
Part# B30D56770A

#8 is the hood seal.

The weatherstrip seals the hood to the grill and HL's. The seal seals the hood to the radiator support.

JMBaggie

[justanotheradikt]

do i need both? i dont think i have either one? or do you just need one? sorry for all this...if you can answer that for me ill order tonight/whenever you can answer that. oh also i need this part (see pic). its a cover thingy that looks like the one in the second pic. no clue on how else to explain it.

[Kansei]

do i need both? i dont think i have either one? or do you just need one? sorry for all this...if you can answer that for me ill order tonight/whenever you can answer that. oh also i need this part (see pic). its a cover thingy that looks like the one in the second pic. no clue on how else to explain it.

Check in the windshield cowl section in the collision repair guide, I think I saw it in there when I was browsing around.

[bagman1]

do i need both? i dont think i have either one? or do you just need one? sorry for all this...if you can answer that for me ill order tonight/whenever you can answer that. oh also i need this part (see pic). its a cover thingy that looks like the one in the second pic. no clue on how else to explain it.

Only you can answer the do I need both thing, all I can say is that Mazda thought you did when they built the car. I am not trying to be a smartass I am just saying that sometimes Mazda over does it on the amount of crap they put on a new car. I really don't now what the inner seal is there for.

On the cap that is part# E01650796 MSRP-2.25 Website-1.80

JMBaggie

[brouhaha]

The door skin qualifies for free shipping.

JMBaggie

Thanks JMB. I'll talk to the body shop and see if the skin can be procured from you instead of their regular place.

[bagman1]

Thanks JMB. I'll talk to the body shop and see if the skin can be procured from you instead of their regular place.

Anytime. Please let me know if I can be of anymore assistance.

JMBaggie

[justanotheradikt]

does anyone have a pic of that? i dont think i had that new... oh well...

i guess i just wont get it right now. going to order right now :)

[justanotheradikt]

pshh it was no money at all...ordered... name is Heath. let me know if you need my VIN for that order

[bagman1]

pshh it was no money at all...ordered... name is Heath. let me know if you need my VIN for that order

Order went through fine. They will be shipping out to you today.

JMBaggie

[justanotheradikt]

cool...i wont be back until mid next week so i guess itll be waitin on me.
thanks! ill let ya know when i get back if its here!

damn i forgot to order the most important thing....the gasket!!! gah im so retarted...oh well ill just order it when i get back.. hahaha.

[bagman1]

cool...i wont be back until mid next week so i guess itll be waitin on me.
thanks! ill let ya know when i get back if its here!

damn i forgot to order the most important thing....the gasket!!! gah im so retarted...oh well ill just order it when i get back.. hahaha.

I was wondering about that item. You want me to throw it in on this order?

JMBaggie

[justanotheradikt]

edit:
who am i kidding...im going to change it...yea go ahead and add it in.

[bagman1]

edit:
who am i kidding...im going to change it...yea go ahead and add it in.

Consider it done.

JMBaggie

[justanotheradikt]

do i need to do anything else or what? how to pay? or is it FREE!!! hhaha. j/k

[steve_protege]

Part# ZL0415200B MSRP-238.95 Website-191.16 I do have it in stock.

JMBaggie

Here is the part # that the body shop people gave me for the radiator support assembly: BJ0J-53-100F.

Id also be interested in the hood latch as well. I have part #: BJ0E-56-620A

[bagman1]

Here is the part # that the body shop people gave me for the radiator support assembly: BJ0J-53-100F.

Id also be interested in the hood latch as well. I have part #: BJ0E-56-620A

Pricing
BJ0J53100F MSRP-512.05 Website-409.64 I would have to order it. Due to its size their would be a shipping charge of 25.00
BJ0E56620A MSRP-59.55 Website-47.64 I would have to order this also.

JMBaggie

[justanotheradikt]

bagman....do i need to redo anything to pay the extra for that part or can you just tack it onto the existing bill?

[bagman1]

bagman....do i need to redo anything to pay the extra for that part or can you just tack it onto the existing bill?

I just tacked it on on my end.

JMBaggie

[justanotheradikt]

oh ok cool.
THANKS!

[steve_protege]

Don't know if you can get this or not, but would you be able to get your hands on a set of the 1.6 liter side engine mounts? If so, Id be very interested in that.

[bagman1]

Don't know if you can get this or not, but would you be able to get your hands on a set of the 1.6 liter side engine mounts? If so, Id be very interested in that.

Do you have a AT or MT?

Which one do you need?

http://i4.tinypic.com/zx4luc.jpg

JMBaggie

[steve_protege]

Do you have a AT or MT?

Which one do you need?

http://i4.tinypic.com/zx4luc.jpg

JMBaggie


I have an automatic. As far as what I would need, I would probably need both side mounts. Im not exactly sure what they look like from that picture, but one is on the left side of the engine, back by the firewall and the other is obviously on the other side by the other side of the engine bay.

[bagman1]

I have an automatic. As far as what I would need, I would probably need both side mounts. Im not exactly sure what they look like from that picture, but one is on the left side of the engine, back by the firewall and the other is obviously on the other side by the other side of the engine bay.

The one back by the fire wall
Part# B25G39040D MSRP-66.35 Website-53.08 I would have to order it.
The one by the radiator
Part# B25D39050C MSRP-47.95 Website-38.36 I do have this one in stock

JMBaggie

[steve_protege]

The one back by the fire wall
Part# B25G39040D MSRP-66.35 Website-53.08 I would have to order it.
The one by the radiator
Part# B25D39050C MSRP-47.95 Website-38.36 I do have this one in stock

JMBaggie


Those sound like the front and rear ones. I need to try and find the side ones. Im asking around to see if anyone might know where they are located on the block itself. Ill get back in touch with you as soon as I find out my question.

[SIBalla23]

Hi, I was wondering if you sell this individually. I need one bolt that helps to hold up the front crossmember bar. I also need the bolt and nut that holds the downpipe and midpipe together. Just wanted to know if I can get them from you because finding one from hardware stores isnt really working out. Thanks.

[bagman1]

Hi, I was wondering if you sell this individually. I need one bolt that helps to hold up the front crossmember bar. I also need the bolt and nut that holds the downpipe and midpipe together. Just wanted to know if I can get them from you because finding one from hardware stores isnt really working out. Thanks.

Sorry for the slow reponse, been slammed.

As for the cross member bolt, are we talking about the front to back cross member or the left to right cross member.

On the exhaust I am showing it to be a stud and nut not a bolt and nut. I am looking at the connection before the lower converter, correct.

JMBaggie

[SIBalla23]

As for the crossmember, its on the front suspension, that goes from the left front tire to the right front tire, just need one bolt for it since one is missing.
Also I just realized it is a stud and nut for the exhuast. I have an aftermarket midpipe that came with the bolts. Anyways could I have the nut and would you know the stud length and thread size, because finding another bolt that is kinda like the stud is hard to find.

[bagman1]

As for the crossmember, its on the front suspension, that goes from the left front tire to the right front tire, just need one bolt for it since one is missing.
Also I just realized it is a stud and nut for the exhuast. I have an aftermarket midpipe that came with the bolts. Anyways could I have the nut and would you know the stud length and thread size, because finding another bolt that is kinda like the stud is hard to find.

Bolt Part# H38034318B MSRP-4.25 Website-3.40

As for the stud I don't have any sizing info on that. Also the OE stud and nut system on that was a spring stud set-up do to the fact that the OE exhaust doesn't have a flex pipe in the system so Mazda used spring studs to do the job of the flex pipe.

JMBaggie

[justanotheradikt]

hey i THINK your package got to my house...had the parents call and tell me something was there...ill check it out when i get home tues night but im sure its all great!
thanks!

[bagman1]

hey i THINK your package got to my house...had the parents call and tell me something was there...ill check it out when i get home tues night but im sure its all great!
thanks!


Anytime,
JMBaggie

[justanotheradikt]

yes it was the package...thanks for everything...

also i need the exhaust manifold gasket and the msp front grille emblem...is that possible? if they are both in stock in can swing by and pick them up b/c im in NC right now and right down the street from you.

[bagman1]

yes it was the package...thanks for everything...

also i need the exhaust manifold gasket and the msp front grille emblem...is that possible? if they are both in stock in can swing by and pick them up b/c im in NC right now and right down the street from you.

I would have to order both items.

JMBaggie

[ssupra96]

i need a new a/c compressor w/hoses and everything for a 2003 msp. how much and whats the part# please. thank you

[bagman1]

i need a new a/c compressor w/hoses and everything for a 2003 msp. how much and whats the part# please. thank you

http://i4.tinypic.com/11170hc.jpg

Hose #1
Part# BJ1P61462E MSRP-156.45 Website-125.16

Hose #2
Part# BJ1P61461A MSRP-101.05 Website-80.84

AC Compressor
Part# B25F61K00A MSRP-1232.50 Website-986.00 will sell it to you for 900.00 including shipping (within the US). I can probably find one used but my used parts supplier is closed today.

AC Compressor clutch
Part# B26K61L30 MSRP-185.20 Website-148.16
If I can find a used compressor I will make sure that it has a clutch on it.

JMBaggie

[justanotheradikt]

alright well i think imma need the exhaust gasket and front grille emblem from you.

[bagman1]

alright well i think imma need the exhaust gasket and front grille emblem from you.

If my memory is working you have a 2.0L DX. If that is correct....
Ex manifold gasket FS0113460A
Frt emb S41A51731A

JMBaggie

[justanotheradikt]

hey...got the gasket here.... the front emblem i could use though! :) how much is it? or i guess i could just go look at the site eh? haha

[Kansei]

hey...got the gasket here.... the front emblem i could use though! :) how much is it? or i guess i could just go look at the site eh? haha

It's 12 dollars. You still have the MP3/MSP bumper right? Here's the part for the MSP front grille emblem (the brushed silver look instead of chrome)

http://www.msprotege.com/forum/showthread.php?t=123636241

I think it's post #3 in the thread.

[bagman1]

It's 12 dollars. You still have the MP3/MSP bumper right? Here's the part for the MSP front grille emblem (the brushed silver look instead of chrome)

http://www.msprotege.com/forum/showthread.php?t=123636241

I think it's post #3 in the thread.

Part# for the MP3/MSP front emblem is 00008RC10.

JMBaggie

[ProFiver]

light bulbs for the headlights on a 2003 protege 5. i'll prolly get 5. my bulbs burn out really fast.

also do you have the little plastic pieces that cover the stereo removal holes? they fit on the side of the stock headunit. i tried taking those bits off and they ripped apart.

thanks.

[Kansei]

light bulbs for the headlights on a 2003 protege 5. i'll prolly get 5. my bulbs burn out really fast.

also do you have the little plastic pieces that cover the stereo removal holes? they fit on the side of the stock headunit. i tried taking those bits off and they ripped apart.

thanks.

I doubt there is a part number for those little plastic pieces but I could stick mine in an envelope and send them to you if you want. my stock head unit isn't of much use because the CD player in it stopped working. Let me know.

[ProFiver]

holy cow you would do that? that's really cool of you. mazda heads helping other mazda heads out. i lob this forum! thanks Kansei!! ill pm you where to send em.

[bagman1]

light bulbs for the headlights on a 2003 protege 5. i'll prolly get 5. my bulbs burn out really fast.

also do you have the little plastic pieces that cover the stereo removal holes? they fit on the side of the stock headunit. i tried taking those bits off and they ripped apart.

thanks.

HL Bulbs
Part# 0000110H7 MSRP-22.70ea Website-18.16ea

Hole Covers
Rt side part# F14666BC4 MSRP-14.75 Website-11.80
Lt side part# F14766BC4 MSRP-14.75 Website-11.80

I have plenty of HL bulbs in stock, I would have to order the hole covers.

JMBaggie

[Bakum]

I'm Looking for a OEM Intercooler pipe. The Pipe from the top of the factory IC to the Turbo. Thanks.

[bagman1]

I'm Looking for a OEM Intercooler pipe. The Pipe from the top of the factory IC to the Turbo. Thanks.


Part# 000088C57 MSRP-221.69 Website-177.32

I would have to order it. figure 2-3 days to me then shipped to you.

JMBaggie

[justanotheradikt]

hey i need the clips/pins to hold in the hood insulator. dont know how many i need or if there is a kit or what... let me know man i looked on the site but the only thing i could find is like 1.50 and i figured that was not it

[D-rock240]

Thanks for the speedy transaction, looking forward to receiving my parts :)

[bagman1]

hey i need the clips/pins to hold in the hood insulator. dont know how many i need or if there is a kit or what... let me know man i looked on the site but the only thing i could find is like 1.50 and i figured that was not it


Part# GA2A56694 MSRP-1.85ea Website-1.48ea it takes 14 to do the whole hood.

JMBaggie

[Foolish]

Hi, I'm looking for both headrests for the rear (third row) seat for a '00 MPV. Int. color code is LA8, which is tan.

Thanks.

[justanotheradikt]

Part# GA2A56694 MSRP-1.85ea Website-1.48ea it takes 14 to do the whole hood.

JMBaggie

so i need to order 14 of these?

[bagman1]

so i need to order 14 of these?

Only if you need all of them do you need to order 14.

JMBaggie

[justanotheradikt]

well i didnt get any of them with my insulator, so if thats how many you need to do the entire insulator then yup i do need all 14 :)

just order from the website?

[bagman1]

well i didnt get any of them with my insulator, so if thats how many you need to do the entire insulator then yup i do need all 14 :)

just order from the website?


That would be best.

JMBaggie

[justanotheradikt]

how long is turn around on those?

edit: if i ordered next week would i have it before july 20th?

[bagman1]

how long is turn around on those?

edit: if i ordered next week would i have it before july 20th?

If you ordered them By 5pm Monday you should have them by Sat.

JMBaggie

[LX_StreetGlow]

hey i was just wonderin how much for a passanger side a pillar for '03 LX and any chance it may come in black, oh and also the door sills front and rear (black) .... thx

peace

[bagman1]

hey i was just wonderin how much for a passanger side a pillar for '03 LX and any chance it may come in black, oh and also the door sills front and rear (black) .... thx

peace


Sorry this apparently got lost in a see of posts or I am just blind as a bat, probably the later.

The only colors available to me on the pillar trims is beige or grey. For the scuff plates they do offer Off-Black (dark graphite). Fronts are website price of 11.00ea and the rears are 8.20ea.

Once again sorry for not seeing this sooner,
JMBaggie

[snowblazin]

I'm looking for the black plastic peice on the intake manifold that has a connector for a 6 wire connector. I believe it's either the egr boost sensor, or egr boost sensor selenoid. This is for an 03 p5. HELP!

[bagman1]

I'm looking for the black plastic peice on the intake manifold that has a connector for a 6 wire connector. I believe it's either the egr boost sensor, or egr boost sensor selenoid. This is for an 03 p5. HELP!

Is it possible for you to post a picture of the item? If not, I will post a IPB of the emission system in the morning so that maybe you can spot it.

JMBaggie

[snowblazin]

Is it possible for you to post a picture of the item? If not, I will post a IPB of the emission system in the morning so that maybe you can spot it.

JMBaggie
I'll see if I can get someone to take a pic. Obviously since I don't have it I can't take one on my car. I'll see if I can get a fellow NEPOCer to snap something.

[justanotheradikt]

hey.... when you quoted those pillars....is that the driver side a-pillar? if so then imma order one also... you have that and all 14 of the hood insulator clips in stock? if so imma order it tomorrow at some point.

[justanotheradikt]

nevermind...found out what it was.... no paypal option! boo!!!!! will order in 2 days when it gets to my account

[LX_StreetGlow]

Sorry this apparently got lost in a see of posts or I am just blind as a bat, probably the later.

The only colors available to me on the pillar trims is beige or grey. For the scuff plates they do offer Off-Black (dark graphite). Fronts are website price of 11.00ea and the rears are 8.20ea.

Once again sorry for not seeing this sooner,
JMBaggie


np bro, ok for the pillar is there a way that u can paint it for me, cuz i did mine (few times) but since i live in LV and it gets hot here the paint gets sticky and it comes off easly... i mean rlly easy, so i dont wonna keep doin it myself, i rather pay to have it profesionaly done and be done with it.

oh by the way what are the #s for pillar and scuff plates
thx

peace

[Foolish]

Hi, I'm looking for both headrests for the rear (third row) seat for a '00 MPV. Int. color code is LA8, which is tan.

Thanks.

[bagman1]

I'll see if I can get someone to take a pic. Obviously since I don't have it I can't take one on my car. I'll see if I can get a fellow NEPOCer to snap something.


See if you can see what you are looking for in this picture.

http://i2.tinypic.com/1zpmzb6.jpg
http://i1.tinypic.com/1zpn0jd.jpg


The first picture is all the Emission solemoids where the 2nd picture is of the MAP/boost sensor.
JMBaggie

[bagman1]

nevermind...found out what it was.... no paypal option! boo!!!!! will order in 2 days when it gets to my account

I do offer PayPal. If you want to use PayPal place your order and where it asks for CC info just put 0's. Then in the comments section put your PayPal address and I will e-bill you.

JMBaggie

[bagman1]

np bro, ok for the pillar is there a way that u can paint it for me, cuz i did mine (few times) but since i live in LV and it gets hot here the paint gets sticky and it comes off easly... i mean rlly easy, so i dont wonna keep doin it myself, i rather pay to have it profesionaly done and be done with it.

oh by the way what are the #s for pillar and scuff plates
thx

peace

Part#'s follow
Rt A-pillar in grey- Part# BL8D6816003 MSRP-45.20 Website-36.16
I do not have the ability to have this painted.

Scuff plates in off-black

Rt frt- Part# B25D68710A65 MSRP-13.75 Website-11.00
Lt Frt- Part# B25D68720A65
Rt RR- Part# B25F68730A65 MSRP-10.25 Website-8.20
Lt RR- Part# B25F68740A65

I would have to order all items listed. Figure 2-3 days to me then shipped to you.

JMBaggie

[bagman1]

Hi, I'm looking for both headrests for the rear (third row) seat for a '00 MPV. Int. color code is LA8, which is tan.

Thanks.

Is there anyway you can get me the last 8 digits of your VIN#. There are 3 styles of head rest. The MSRP price range is 112.00 to 235.00.

JMBaggie

[justanotheradikt]

I do offer PayPal. If you want to use PayPal place your order and where it asks for CC info just put 0's. Then in the comments section put your PayPal address and I will e-bill you.

JMBaggie
oh really?

just tried it


edit: name is heath..... incase anything goes wrong. in the new orleans person that just ordered

[bagman1]

oh really?

just tried it


edit: name is heath..... incase anything goes wrong. in the new orleans person that just ordered

Order received invoice sent.

JMBaggie

[Antoine]

Please check your PM inbox Jason. Thank You!

[snowblazin]

See if you can see what you are looking for in this picture.

The first picture is all the Emission solemoids where the 2nd picture is of the MAP/boost sensor.
JMBaggie
I don't see it in either pic. It sits directly below the TB, it's black plastic and has a connector for a 6 wire plug. I wish I could get a pic.

[bagman1]

I don't see it in either pic. It sits directly below the TB, it's black plastic and has a connector for a 6 wire plug. I wish I could get a pic.

Let me do some digging and I will see what I can come up with.

JMBaggie

[snowblazin]

I found it! I believe these pics are the same item. I got them from the How To for cleaning the EGR.

[justanotheradikt]

hey man.. the addy i sent can only be reached by usps so if you ship with someone else let me know and i can send you another addy.

[LX_StreetGlow]

Part#'s follow
Rt A-pillar in grey- Part# BL8D6816003 MSRP-45.20 Website-36.16
I do not have the ability to have this painted.

Scuff plates in off-black

Rt frt- Part# B25D68710A65 MSRP-13.75 Website-11.00
Lt Frt- Part# B25D68720A65
Rt RR- Part# B25F68730A65 MSRP-10.25 Website-8.20
Lt RR- Part# B25F68740A65

I would have to order all items listed. Figure 2-3 days to me then shipped to you.

JMBaggie


ok thx, i'll try to c if there's sumone here that can paint them for me, i'll proly order the parts toward end of the month, oh and one more thing .. ok i'm also lookin for those handels above the doors on the passanger side, u kno the ones that are for passangers so they can hold on to their lifez as ur driving like a mf..lolz ... that way the order we'll be like 100 so i can get free Ship.
thx

peace

[bagman1]

I found it! I believe these pics are the same item. I got them from the How To for cleaning the EGR.


The only way I can get that is to sell the EGR valve.

Part# FSY1203009U MSRP-146.35 Website-117.08

I do have it in stock.

JMBaggie

[bagman1]

hey man.. the addy i sent can only be reached by usps so if you ship with someone else let me know and i can send you another addy.

I will USPS it.

JMBaggie

[bagman1]

ok thx, i'll try to c if there's sumone here that can paint them for me, i'll proly order the parts toward end of the month, oh and one more thing .. ok i'm also lookin for those handels above the doors on the passanger side, u kno the ones that are for passangers so they can hold on to their lifez as ur driving like a mf..lolz ... that way the order we'll be like 100 so i can get free Ship.
thx

peace

Does yours have a sunroof?

JMBaggie

[LX_StreetGlow]

Does yours have a sunroof?

JMBaggie

no, its an LX not ES

[snowblazin]

The only way I can get that is to sell the EGR valve.

Part# FSY1203009U MSRP-146.35 Website-117.08

I do have it in stock.

JMBaggie
Sold! What's the paypal addy?

[bagman1]

no, its an LX not ES

Sorry forgot how to read.

Rt side Part# LC7069470A03 MSRP-17.20ea Website-13.76ea Requires 2
Lt side part# BN5V6947003 same pricing need 1

Screw caps
LC706947403 MSRP-1.50ea Website-1.20ea Requires 3
LC706947203 MSRP-1.50ea Website-1.20ea Requires 3

I would have to order these too.

JMBaggie