MazdaSpeed 6 - Performance Mods

[PerfectXtreme]

MS6 Performance Mods List (http://www.msprotege.com/forum/showthread.php?t=123630821)

[Antoine]

(cool) Thanks for starting a list! Rainman has created a general one but it doesn't hurt to have specific ones in each sub-forum as long as they are updated!

I'll go ahead an copy your list into Rainmans general list...Once these lists start growing...Will see if any further sorting is needed. :D

[ferdinand]

Corksport has Mazdaspeed specific springs and sway bars
springs..
http://corksport.com/store/category/5ium/ate-suspension.html

sway bars..
http://corksport.com/store/category/5iwn/ate-Suspension_misc.html

[Rainman]

Corksport has Mazdaspeed specific springs and sway bars
springs..
http://corksport.com/store/category/5ium/ate-suspension.html

sway bars..
http://corksport.com/store/category/5iwn/ate-Suspension_misc.html

Thanks Ferd. Copied over to the official sticky thread here (http://www.msprotege.com/forum/showthread.php?p=2387887).

R

[chrisgozoom 29]

MS6 Performance Mods List (http://www.msprotege.com/forum/showthread.php?t=123630821)

I looked at this site, but i can't figure out how thick the pipes are, im looking for a 3" cat-back exhaust system, do u know?
5/12/06 - Magnaflow: Cat-back Exhaust
http://www.magnaflow.com/02product/s...ainall&id=1181

[thaoespeeder6]

PerfectXtreme:
Now just a question for you, did you install your blow off valve yourself or did you have a company do it. Just have had a little trouble with mine so any suggestions are appreciated.

[maggie]

today i bought maggie an escort passport 8500 x50 (blue led's) and i love it. in transit are my Injen SP (speedpro) intake system w/ MR technology and hks ssqv with cp-e flange. once i get my shit i'm gonna post pictures. and hopefully vids.

much much more to come...

[Florida Mark]

Does anyone know if installing a cold air intake like AEM will void the factory warranty?

[TX Speed 6]

only if they can prove that it caused the damage, I got the mazdaspeed intake myself just to make sure it would be ok. its actually the same intake made by aem, just rebadged as a Mazdaspeed part. i got mine online for 300

[Florida Mark]

Mazdaspeed intake seems to be the way to go so there is no question.

[speed6killer]

I looked at this site, but i can't figure out how thick the pipes are, im looking for a 3" cat-back exhaust system, do u know?
5/12/06 - Magnaflow: Cat-back Exhaust
http://www.magnaflow.com/02product/s...ainall&id=1181
Yea get the CPE 3' exhaust and for more power get the down pipe w/ high flow cat. cp-e.com or call 1-301-576-6142 and ask For Josh or Jordan. Great guys and a awesome company! Jorge Miami,Fl. (cheers2) Peace Out.

[madboy]

I've added a Mazdaspeed Cold Air Intake.
My '06 MS6 is now pulling 6500 rpm consistently/smoothly on Shell 91 octane in CA.
I'm considering the next mod.
The downpipe from CP-E looks great.
I need a cat in my state. The Cat is a $150 option on CP-E's site.
How much of a power increase could I expect with a downpipe and MagnaFlow cat-back opposed to just the MagnaFlow?
Do you have to remove a motor mount or move the engine to install the downpipe?
I'm waiting on the chip until there are some comparative posts.

Only the Best to You

Madboy

[drj1633]

I wanted to get a exaust but i want a proformance with downpipe and ideas that could help me?