estimate my whp

[Slowp0ke]

i have a injen cai and unichip im ordering the corksport exhaust and NGK ZFR6F-11 V power plugs here very shortly

i just want somone with simular mods to give me a range on where they stand

btw im going to be running the unichip on 10psi boost setting and probley map B thanks guys

[ChopstickHero]

with just exhaust, injen, unichip.... i say 175whp. you may be able to hit close to 190whp with a fmic.

[.mazda.speed.]

I say more then 175whp. 10 psi you'll be up in the 185 range. Put a fmic and get it tuned nice yould be close to 200whp.

[Swerny]

1,00000000000000000000000000000 HP at the wheels.

J/k. I agree with 175 whp until heat soak owns joo.

[ca_deal1]

You are looking around 175whp
You need to get a downpipe, and a SMIC or FMIC, then you will be looking at 200whp.
Get the downpipe first!!!! You will get around 5-7whp just from that!!!

[03orgspd]

if you get the corksport, unichip, and intake, i think you should be around 180-185 whp...the unichip creates all the power and w/ my setup with the vibrant, injen, hiboost fmic, and unichip on about 10 psi, i was about 200 whp

[slug420]

124

[Slowp0ke]

124 my ass lol

[ONRAILS]

whoa... gonna be very close to 200whp. Remember, the unichip will extract some hp due to the tune. Just for example... I hit close to 200whp with injen, mbc @10psi, custom exhaust (stock spipe, apexr1 jpipe, custom crush bend 2.5inch midpipe, and stock axle-back). No unichip or afc, and now fmic at the time.

As for the plugs... use 7 instead of 6.

[pluto316]

100 give or take 50hp.

[Pretzellogic]

You egine asplode! OMG!

[Slowp0ke]

whoa... gonna be very close to 200whp. Remember, the unichip will extract some hp due to the tune. Just for example... I hit close to 200whp with injen, mbc @10psi, custom exhaust (stock spipe, apexr1 jpipe, custom crush bend 2.5inch midpipe, and stock axle-back). No unichip or afc, and now fmic at the time.

As for the plugs... use 7 instead of 6.


so what do you think you are at right now with the colder plugs and fmic?

[speedprotegewi]

gonna bring this one out from a month ago cuz i will have similar mods soon and want some ideas on my whp.

i will have:
injen cai
NGK IZFR6F-11 Laser Iridium plugs (came today :D)
stock s-pipe
apexr1 2.5" midpipe with cat (stupid wisconsin emissions)
custom crush bend 2.5" catback to Aero Turbine Muffler
Unichip (running map A most likely - not sure on high or low boost)
mobil1 fluids (if it even makes a difference)

i will be removing my mbc and using the unichip one. and i also think 200whp that the one guy said is a bit high especially w/o any ems.

what do you guys think for my whp at low and high boost?

[NeverSober]

90whp

[speedprotegewi]

90whp

(cricket) ok now im waiting for real answers....

[NeverSober]

If you want real answers then go get the damn car dynoed.

[NeverSober]

Nothing you are going to get from this thread is a "real" answer. Every single car even with the same exact mods is going to have different numbers.

[ONRAILS]

Didn't dyno after the FMIC. So... not sure. The fmic had to give at least... 10whp. Just bought the DSM AFC, so I will be going to the dyno again soon.


so what do you think you are at right now with the colder plugs and fmic?

[speedprotegewi]

/sigh apparently you didnt get the purpose of my post. i used the "estimate my whp" thread and i also noted that i will have these parts soon (see my signature), thus i do not have them now in order to get a dyno done. i asked a simple question and was expecting a simple answer, but i guess that is too much to ask.......

[ONRAILS]

Silver is always faster! ;)


gonna bring this one out from a month ago cuz i will have similar mods soon and want some ideas on my whp.

i will have:
injen cai
NGK IZFR6F-11 Laser Iridium plugs (came today :D)
stock s-pipe
apexr1 2.5" midpipe with cat (stupid wisconsin emissions)
custom crush bend 2.5" catback to Aero Turbine Muffler
Unichip (running map A most likely - not sure on high or low boost)
mobil1 fluids (if it even makes a difference)

i will be removing my mbc and using the unichip one. and i also think 200whp that the one guy said is a bit high especially w/o any ems.

what do you guys think for my whp at low and high boost?

[quatelate]

if all you are doing is getting the cat back and putting boost at 10psi with tuning id say near 185 but if your getting the full exhaust id say about 200~205

[JOMO]

180ish
















Maybe