Exhaust Hangars

[zzMSP03.5]

Anyone know, where or who i could purchase longer exhaust hangars?

This is my dilema, i purchased the apexr1's exhaust system... unfortuneatly it is pushing against my bumper and lip. So i bought the kartboy hangars... same result. So i recently have taken the lip off and was thinking about cutting it, but the problem is, since i have taken it off i realize that the exhaust is still sometimes(mainly during idle) vibrating the bumper, and you can hear it in car... kinda annoying. What my goal is, is to find a set of exhaust hangars, that will drop the canister just about 1/2 in to a 1 in or 1 1/2 in. So it will get away from the bumper and the lip. Any suggestions?? Please and thank you!!!

ill have a updated sig soon, have to get back into photoshop.. . andi have to get my damn camera back

[lancebav]

Anyone know, where or who i could purchase longer exhaust hangars?

This is my dilema, i purchased the apexr1's exhaust system... unfortuneatly it is pushing against my bumper and lip. So i bought the kartboy hangars... same result. So i recently have taken the lip off and was thinking about cutting it, but the problem is, since i have taken it off i realize that the exhaust is still sometimes(mainly during idle) vibrating the bumper, and you can hear it in car... kinda annoying. What my goal is, is to find a set of exhaust hangars, that will drop the canister just about 1/2 in to a 1 in or 1 1/2 in. So it will get away from the bumper and the lip. Any suggestions?? Please and thank you!!!

ill have a updated sig soon, have to get back into photoshop.. . andi have to get my damn camera back

try and weld on another hanger thatll make it sit lower.. the way I did mine was with the hangers themselves and not the rubber gromits.... your local exhaust shop should be stocked with em...

[orng1]

I've always heard that people bend the hangers when they have issues with an aftermarket exhaust.

[hoindawall]

make sure the middle pipe (the one that connects the axel to the catback pipes) is bolted on the right way. if you look closely the flanges are angled. the muffler shouldnt be touching the bumper at all

[Black_Protege_5]

Just bend the hangers to make it hang down a bit and you will be fine.