Notorious_V.I.C
03-04-2006, 03:20 AM
I just want tog et an idea of which core you all think is supposedly better. I know the make isn't Spearco or Garette but I just like to know from everyone...detail in which one would probably flow better.
First one the pictures are from Johnny Race Car
and the second one is the Street Finish, it's not the one with the exposed welds.
THe only difference besides price is the core thickness and length. I don't know if the thickness is a problem.
I've read that the less the thickness the less the air has to flow or something can't remember it correctly.
Jonny Race Car
This is the 6" intercooler that uses the 25" wide core with centered inlets. Details on it:
Core size: 25 wide X 5.875 tall X 2.75 deep
Overall: 30 from outside of end tank to outside of end tank X 6.5 tall X 3.125 at the thickest
Standard Piping: 2.5 OD X .065 wall X 2 long (2.25" OD available)
There are nine cooling rows and eight fin rows on this intercooler.
The cooling rows on this intercooler are internally finned.
The end tanks have a satin finish.
The threaded mounting points are steel. There are three inserts in the top and three inserts in the bottom.
The intercooler comes with mouthing brackets and bolts.
--------------------------------------------------------------------------
CCA (Custom Coach...)
This is the first one...
ALUMINUM FRONT MOUNT INTERCOOLER - 31x6x3
SPECS:
Core Size - 25x6x3
Total Size - 31x6x3 (end tank to end tank)
Inlet/Outlet - 2.5", beaded.
Rating: 325HP
Pressure tested to 45PSI
http://www.geocities.com/speedpartsrus/intercoolers.html
go the link for pictures. unfornunately there aren't that many posted of that core. I remember someone on the forum saying he was going to buy this one.
Please feedback would be appericated.
First one the pictures are from Johnny Race Car
and the second one is the Street Finish, it's not the one with the exposed welds.
THe only difference besides price is the core thickness and length. I don't know if the thickness is a problem.
I've read that the less the thickness the less the air has to flow or something can't remember it correctly.
Jonny Race Car
This is the 6" intercooler that uses the 25" wide core with centered inlets. Details on it:
Core size: 25 wide X 5.875 tall X 2.75 deep
Overall: 30 from outside of end tank to outside of end tank X 6.5 tall X 3.125 at the thickest
Standard Piping: 2.5 OD X .065 wall X 2 long (2.25" OD available)
There are nine cooling rows and eight fin rows on this intercooler.
The cooling rows on this intercooler are internally finned.
The end tanks have a satin finish.
The threaded mounting points are steel. There are three inserts in the top and three inserts in the bottom.
The intercooler comes with mouthing brackets and bolts.
--------------------------------------------------------------------------
CCA (Custom Coach...)
This is the first one...
ALUMINUM FRONT MOUNT INTERCOOLER - 31x6x3
SPECS:
Core Size - 25x6x3
Total Size - 31x6x3 (end tank to end tank)
Inlet/Outlet - 2.5", beaded.
Rating: 325HP
Pressure tested to 45PSI
http://www.geocities.com/speedpartsrus/intercoolers.html
go the link for pictures. unfornunately there aren't that many posted of that core. I remember someone on the forum saying he was going to buy this one.
Please feedback would be appericated.