Injectors and S-Pipe.

[akeem1003]

Ok guys, the next upgrades I need are the Split-Second PSC1 AFC, some 440cc injectors, and a bigger S-pipe/downpipe so I could run like "kicker". He makes 243WHP on 14psi with stock internals. I just want to do this until I decide on what bigger turbo setup I should go with.

I know corksport and GHL makes an aftermarket downpipe, but the corksport is always out of stock an the GHL is way too expensive($485). I don't need something that shiney for the exhaust.

My question is will I need side-feed injectors or top-feed injectors? Also, should they be high impedence or low impedence injectors.

One more thing, where could I find some colder spark plugs and what brand are they?

[orng1]

get the wrx injectors those are 440's lots of the people here are running those. you can find them on ebay a lot.

[akeem1003]

Will do.

[msp35]

GHL is definately worth the $$$.

[akeem1003]

If I get the GHL, would I have to upgrade my motor mounts also?

[akeem1003]

I just read the thread about the 2.5 downpipe from Mental Addiction Motorsports. There is a big possibility that I would go that route for the S and J pipe. It's only $190. To me, that's a tight a** price.

[sweetlou69]

ya u def cant beat the ghl DP..u figure by the time u get a dp and a midpipe your almost at ghls price

[akeem1003]

I already have a 3" custom midpipe. When the guys from MAM reply to the e-mail I sent them, I will place an order for their 1 piece S and J pipe Mild steel uncoated.

[akeem1003]

Do you think these injectors would work if I upgrade to the Perrin Performance Fuel Rail?

http://cgi.ebay.com/ebaymotors/Subaru-WRX-STI-2005-480cc-injector-240sx-rx7-turbo_W0QQcmdZViewItemQQcategoryZ33742QQitemZ80422 34474QQrdZ1

[msp35]

No you wouldn't *need* motor mounts. I still have not replaced the stockers. Although, it would probably be a good idea, the engine rocks quite a bit, and you have to remove one of the supports for the engine/exhaust when replacing the Spipe. I just haven't gotten around to it yet.

[CasopoliS]

eh 14psi just sounds bad on the stock internals.... life of engine waaaay down

[akeem1003]

That kicker guy has been running 14psi on his map for almost a year now

[CasopoliS]

That kicker guy has been running 14psi on his map for almost a year now

ok that is 1 year. not saying the car WONT last long.... but the chances at 14psi are much greater. lisghtest problem or mis-tune and (boom07)

[akeem1003]

I just want to run his setup for the time being. By the way, he makes about 243WHP. I have not yet decided on what turbo setup I want to go with. But in the near future, I plan to get some forged goodies so don't worrry. I just need to find some WRX injectors that will fit the MSP.

[Notorious_V.I.C]

What does the Perrin Performance Fuel Rail exactly do? ANy performance or just looks better?

[akeem1003]

Don't know really. Just thought I would throw one out there.