Fuel injector help!!!

[Puckpimp71]

After finishing up with SU's manifold (no 626 comments right now please (deadhorse ) I started my car up and noticed a gas smell. Turns out when I was putting the injectors back in, the #3 injector's upper o-ring got damaged and was spraying fuel out. Where can I get an upper o-ring ASAP. Almost everything down here is closed from Hurricane Wilma so I'm SOL unless someone can come up with a solution. BTW there's an Autozone and an Advance Auto near by that are open, but I don't think they'll be much help.
Chris

[Puckpimp71]

bump

[ND4MSP]

Hit the auto stores first chance you get. Take the o ring with you. There's got to be something they should have that matches up. Still just an o ring

[BOOSTR]

Should be able to use some FI o-rings from Advanced or AutoZone. Its a good idea to put some new ones on when you remove them.

[Puckpimp71]

Found an open auto store that had an o-ring kit. The one I put in is a little smaller than the OE one, but it seals enough to get me to work when it opens. Hopefully parts will have just what I need. By the way, all controversy aside, with the Street Unit Manifold my car feels much faster across the board. 7psi after install feels like 10 prior.

[Jeph]

pics?!

[Puckpimp71]

All I've got is my cell phone camera :-( It's not that pretty an install either. I still don't know what to do with the VICS/VTCS plugs.

[Jeph]

Well just take some good pics when you can, I'm sure everyone is interested in how it looks and works.