mikeyb
10-14-2005, 11:31 AM
http://www.japanesecarfans.com/news/2051014.006/2051014.006.1L.jpg
Lighter than its predecessor<O:p</O:p
<O:p</O:p
<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l2 level1 lfo1; tab-stops: list .5in">Larger, stiffer and better equipped – but only 10 kg heavier<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l2 level1 lfo1; tab-stops: list .5in">Painstaking “gram strategy” applied to all components of the cult roadster<O:p</O:p
Extensive use of high-strength steels, aluminium and composite materials<O:p</O:p
Almost all new automobiles today are in danger of being heavier than their predecessors, due to ever-stricter safety standards and higher customer demands for comfort features. Mazda wanted to reverse this trend – and was successful. <O:p</O:p
Delivering a lightweight roadster had highest priority during the development of the new Mazda MX-5. As a result, the third-generation version of the cult roadster is only 10 kg heavier than its predecessor (depending on version).<O:p</O:p
This modest weight gain is achieved despite the third-generation MX-5 being the first to have side airbags, despite having larger wheels, more powerful engines, an extended standard equipment package and a strengthened body shell.<O:p</O:p
<O:p</O:p
Thanks to the gram strategy diet, the latest two-seater retains the true aura of Mazda’s original nimble, responsive handling roadster, a sports car whose rear-wheel drive transmission and powerful, frugal four-cylinder engines are still sufficient to deliver truly exhilarating performance. <O:p</O:p
The soft top is still manual like before – so Mazda could avoid the heavier solution here of an electro-hydraulic retractable top.<O:p</O:p
By weight, 58 percent of all body components of the new Mazda MX-5 are made of ultra high-strength steel or high-strength steel, which save 10 kg. Using aluminium for the bonnet, boot lid, the powerplant frame, front suspension control arms, rear hub carriers, rear brake callipers and rear suspension spring seats reduces weight even further. The front suspension control arms and the hollow front stabilizer alone cut 6.2 kg of unnecessary weight at the front axle.<O:p</O:p
Revolutionary Welding Process for the Boot Lid<O:p</O:p
Spot friction welding, a process first employed on the Mazda RX-8, is used for the boot lid of the new Mazda MX-5. This process, for which Mazda has registered 20 patents, joins zinc covered steel and aluminium panelling. Employing a high-speed spinning tool creates enough heat to spot bind these very different materials to one another. The employment of zinc-coated steel sheeting has other advantages as well. Since zinc melts and runs when heated, it removes the oxidation surface that would otherwise remain at the spot the two metals are welded together, and only without this is a truly robust spot weld possible, because it prevents the chance of corrosion. This process also saves large amounts of electric current needed for traditional spot welding, and the boot lid is now 2.5 kg lighter as well.<O:p</O:p
Other examples of lightweight construction are the intake manifold (- 2.4 kg) and the cylinder head cover (- 1.3 kg), both being made of plastic. Mazda’s gram strategy also dictated mounting the power steering pump and the air conditioning compressor directly to the engine, which did away with the need of a bracket and saved 3.2 kg. The engines themselves are also lighter than the engines of the outgoing model. The block of the 2.0-litre, for instance, is 5.4 kg lighter than the grey cast-iron block of the 1.8-litre power unit of the previous model.<O:p</O:p
<O:p</O:p
Optimized Rearview Mirror Saves 84 Grams <O:p</O:p
Even the smallest of details like the rearview mirror contributed to Mazda’s painstaking vehicle diet programme. Simplifying the mirror’s design saved 84 grams
During the early phases of Mazda MX-5 development, engineers compiled a list of 573 weight-saving ideas. Had they incorporated all of these, the third-generation Mazda MX-5 would have been 43.5 kg lighter than the previous model. While this radical diet was not completely implemented for reasons of long-term durability and/or due to safety considerations, the curb weight target for a new Mazda MX-5 entry-grade version was achieved.<O:p</O:p
Combined with an ideal 50:50 weight distribution between the front and rear axles and a lower centre of gravity, the lightweight construction principle of the new Mazda MX-5 delivers high levels of driving fun and much improved occupant safety. Through the use of high-strength steel, the body shell is now 47 percent stiffer for torsional [twisting] rigidity and 22 percent for flexural [bending] rigidity – than the second-generation MX-5, an improvement that enhances both driving enjoyment and occupant safety. <O:p</O:p
Mazda’s Gram Strategy – Main Components that are Lighter on the new Mazda MX-5 versus the Previous Model<O:p</O:p
<O:p</O:p
<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">High-strength and ultra high-strength steel in the body and floor assembly -10 kg<O:p</O:p <LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Aluminium block of the 2.0-litre engine -5.4 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Bracketless power steering pump and air conditioning compressor -3.2 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Hollow front stabilizer -2.4 kg <O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">High-strength steel seat frames -2.4 kg per seat<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Modifications to the steering system -0.6 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Plastic intake manifold -2.4 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Plastic cylinder head cover -1.3 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Aluminium front suspension lower control arms -2.3 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Aluminium front suspension upper control arms -1.5 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Aluminium rear brake callipers -1.5 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Aluminium rear bearing support -1.75 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Aluminium boot lid -2.5 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">New control units for ABS and dynamic stability control -1.1 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Lighter cloth top (including hollow B-pillar brace) –200/ -400 grams<O:p</O:p
New rearview mirror -84 grams
Mazda Invested More Weight in the Following Safety Components<O:p</O:p
<O:p</O:p
<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l0 level1 lfo3; tab-stops: list .5in">Strengthened A-pillar +5.4 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l0 level1 lfo3; tab-stops: list .5in">New side-impact protection in the doors +1.0 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l0 level1 lfo3; tab-stops: list .5in">New bulkhead behind the seats +12.8 kg<O:p</O:p
Side airbags +2.3 kg
source:http://www.worldcarfans.com/news.cfm/newsid/2051014.006/page/1/mazda/1.html<O:p</O:p
Lighter than its predecessor<O:p</O:p
<O:p</O:p
<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l2 level1 lfo1; tab-stops: list .5in">Larger, stiffer and better equipped – but only 10 kg heavier<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l2 level1 lfo1; tab-stops: list .5in">Painstaking “gram strategy” applied to all components of the cult roadster<O:p</O:p
Extensive use of high-strength steels, aluminium and composite materials<O:p</O:p
Almost all new automobiles today are in danger of being heavier than their predecessors, due to ever-stricter safety standards and higher customer demands for comfort features. Mazda wanted to reverse this trend – and was successful. <O:p</O:p
Delivering a lightweight roadster had highest priority during the development of the new Mazda MX-5. As a result, the third-generation version of the cult roadster is only 10 kg heavier than its predecessor (depending on version).<O:p</O:p
This modest weight gain is achieved despite the third-generation MX-5 being the first to have side airbags, despite having larger wheels, more powerful engines, an extended standard equipment package and a strengthened body shell.<O:p</O:p
<O:p</O:p
Thanks to the gram strategy diet, the latest two-seater retains the true aura of Mazda’s original nimble, responsive handling roadster, a sports car whose rear-wheel drive transmission and powerful, frugal four-cylinder engines are still sufficient to deliver truly exhilarating performance. <O:p</O:p
The soft top is still manual like before – so Mazda could avoid the heavier solution here of an electro-hydraulic retractable top.<O:p</O:p
By weight, 58 percent of all body components of the new Mazda MX-5 are made of ultra high-strength steel or high-strength steel, which save 10 kg. Using aluminium for the bonnet, boot lid, the powerplant frame, front suspension control arms, rear hub carriers, rear brake callipers and rear suspension spring seats reduces weight even further. The front suspension control arms and the hollow front stabilizer alone cut 6.2 kg of unnecessary weight at the front axle.<O:p</O:p
Revolutionary Welding Process for the Boot Lid<O:p</O:p
Spot friction welding, a process first employed on the Mazda RX-8, is used for the boot lid of the new Mazda MX-5. This process, for which Mazda has registered 20 patents, joins zinc covered steel and aluminium panelling. Employing a high-speed spinning tool creates enough heat to spot bind these very different materials to one another. The employment of zinc-coated steel sheeting has other advantages as well. Since zinc melts and runs when heated, it removes the oxidation surface that would otherwise remain at the spot the two metals are welded together, and only without this is a truly robust spot weld possible, because it prevents the chance of corrosion. This process also saves large amounts of electric current needed for traditional spot welding, and the boot lid is now 2.5 kg lighter as well.<O:p</O:p
Other examples of lightweight construction are the intake manifold (- 2.4 kg) and the cylinder head cover (- 1.3 kg), both being made of plastic. Mazda’s gram strategy also dictated mounting the power steering pump and the air conditioning compressor directly to the engine, which did away with the need of a bracket and saved 3.2 kg. The engines themselves are also lighter than the engines of the outgoing model. The block of the 2.0-litre, for instance, is 5.4 kg lighter than the grey cast-iron block of the 1.8-litre power unit of the previous model.<O:p</O:p
<O:p</O:p
Optimized Rearview Mirror Saves 84 Grams <O:p</O:p
Even the smallest of details like the rearview mirror contributed to Mazda’s painstaking vehicle diet programme. Simplifying the mirror’s design saved 84 grams
During the early phases of Mazda MX-5 development, engineers compiled a list of 573 weight-saving ideas. Had they incorporated all of these, the third-generation Mazda MX-5 would have been 43.5 kg lighter than the previous model. While this radical diet was not completely implemented for reasons of long-term durability and/or due to safety considerations, the curb weight target for a new Mazda MX-5 entry-grade version was achieved.<O:p</O:p
Combined with an ideal 50:50 weight distribution between the front and rear axles and a lower centre of gravity, the lightweight construction principle of the new Mazda MX-5 delivers high levels of driving fun and much improved occupant safety. Through the use of high-strength steel, the body shell is now 47 percent stiffer for torsional [twisting] rigidity and 22 percent for flexural [bending] rigidity – than the second-generation MX-5, an improvement that enhances both driving enjoyment and occupant safety. <O:p</O:p
Mazda’s Gram Strategy – Main Components that are Lighter on the new Mazda MX-5 versus the Previous Model<O:p</O:p
<O:p</O:p
<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">High-strength and ultra high-strength steel in the body and floor assembly -10 kg<O:p</O:p <LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Aluminium block of the 2.0-litre engine -5.4 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Bracketless power steering pump and air conditioning compressor -3.2 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Hollow front stabilizer -2.4 kg <O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">High-strength steel seat frames -2.4 kg per seat<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Modifications to the steering system -0.6 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Plastic intake manifold -2.4 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Plastic cylinder head cover -1.3 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Aluminium front suspension lower control arms -2.3 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Aluminium front suspension upper control arms -1.5 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Aluminium rear brake callipers -1.5 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Aluminium rear bearing support -1.75 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Aluminium boot lid -2.5 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">New control units for ABS and dynamic stability control -1.1 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l1 level1 lfo2; tab-stops: list .5in">Lighter cloth top (including hollow B-pillar brace) –200/ -400 grams<O:p</O:p
New rearview mirror -84 grams
Mazda Invested More Weight in the Following Safety Components<O:p</O:p
<O:p</O:p
<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l0 level1 lfo3; tab-stops: list .5in">Strengthened A-pillar +5.4 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l0 level1 lfo3; tab-stops: list .5in">New side-impact protection in the doors +1.0 kg<O:p</O:p<LI class=MsoNormal style="MARGIN: 0in 0in 0pt; mso-list: l0 level1 lfo3; tab-stops: list .5in">New bulkhead behind the seats +12.8 kg<O:p</O:p
Side airbags +2.3 kg
source:http://www.worldcarfans.com/news.cfm/newsid/2051014.006/page/1/mazda/1.html<O:p</O:p