ripped motor mount

[mazda3zoom]

so today i was takin my motor out of my car and i noticed my top motor mount is completely ripped apart. ill take some pics tomorrow but i was wondering if anyone has heard an update on some aftermarket motor mounts?? this would be an ideal time to change them.

[mazda3zoom]

and before anyone asks why im takin the motor outta my car its because i spun a rod bearing so now im fixing it, and once i got the trans off the engine im definately due for a new clutch so ill be gettin one of those too. (braindead

[tsunami]

mr. tea was talking about a company making them but it was goin to take a while... not sure where that is at...

[goldwing2000]

They supposedly redesigned the factory one (there's a TSB). Maybe you could get your hands on one of those until somebody makes some polys.

[mazda3zoom]

They supposedly redesigned the factory one (there's a TSB). Maybe you could get your hands on one of those until somebody makes some polys.
if i cant figure out how to make a new one then ill have to. but while i have the motor out im gonna fill in the other 2 with rhino lining to stiffen em up some.(if you dont know what im talkin about go to the thread titled "custom polyeurethane motor mounts") (first)

[AzMz3]

if i cant figure out how to make a new one then ill have to. but while i have the motor out im gonna fill in the other 2 with rhino lining to stiffen em up some.(if you dont know what im talkin about go to the thread titled "custom polyeurethane motor mounts") (first)


There is a rear mount out. And I had the passenger on replaced. Is there any flex to the rino lining stuff?
I have a torque brace that I will be fabbing some brackets for during the turbo install.

[mazda3zoom]

There is a rear mount out. And I had the passenger on replaced. Is there any flex to the rino lining stuff?
I have a torque brace that I will be fabbing some brackets for during the turbo install.

yeah i saw the rear mount thats out, but that ones easy to do myself. and yea theres a little bit of flex in the rhino but its rreally close to what polyeurathane mounts would be.

[Captain KRM P5]

i believe AWR has mounts in the works for this car

[briand805]

i believe AWR has mounts in the works for this car


Yup.. I just installed the rear mount today.

I installed the 70 durometer. Slight vibration at start up but no driveability issues..

Havent done any hard lunches as I am still breaking in my clutch and fly. So far the car seems more solid and quicker throttle response.

[Gambino]

sorry about the news on both the rod bearing and the mount. I want to see pictures of this ripped mount

[Jeph]

I know I don't have 3, but all 3 of my motor mounts were shot when my new engine went in. So I had them filled with urethane instead of buying new mounts. Its a little harsher than stock, but not nearly as bad as some people mention when they but AWR ones

[mazda3zoom]

heres a shitty pic of the ripped motor mount. i started to cut all of the excess rubber off of it.