turbo timer install help

[brealmp3]

Ok i went to hook up the greddy fatt today, and i printed off the how to from the forum. but the ignition harness described in the how to is completely opposite. it does not have any of the wires listed that are in my ignition harness. so i did not know if there was a seperate one for the mp3 or p5? i tried searching but kept finding the same one. does anyone else know of another or maybe one with pics?

thanks

[DiS]

eh no useful info from me man, but Im just curious if you found the answer that you were looking for here. Have you?

[yashart_mp3]

I'm kind of curious about how to install this as well. I plan to go on the forced induction route as well..... I was able to find this....

http://www.msprotege.com/forum/showthread.php?t=110138&highlight=turbo+timer

it has a link in that thread that shows your the wiring schematics of the p5/mp3/es/ect..... Hope its of some help....

[yashart_mp3]

also found this from the other thread.....

http://www.bulldogsecurity.com/diagrams/diagrams.htm

if you look on the left for mazda, then select protege 1999-2002, scroll down, you will see detailed pics of where the ignition harness (well actually 2) are at....

hope this helps.... keep me/ us updated!

[DiS]

moved to "3rd gen Performance general" section

[25FConv]

Bringing this old thread back to life. I turboed my ES and converted basically everything over to an MSP setup. However, I am tryin to install a Blitz FATT X- Series turbo timer in my car and I realized the wiring setup on the MSP and the ES are different.

I checked the link Yashart posted from 1sty. But on the ignition harness there are 2 black/white wires and 2 ignition wires in the 1sty post. and I have some questions I hope someone can help me with:

1. the 12v constant is listed as black/white OR black....(which one do I use?)
2. there is a 12v ignition there is blue, and a 2nd ignition there is black/red...(which one do i splice into?)

3. the accessory wire is supposed to be black/white.....however, there are 2 black/white wires.....which one do i use?

Can someone please help me out. Thanks in advance.