Mazda Protege Keyless Entry Remotes & progamming instructions

[93Miata]

What does your local dealer charge for Mazda keyless entry remotes?

My Mazda dealer wants $99 a piece plus $35 for programming for each of my cars (MS Protege, 98 Millenia).

I'm curious to see what other dealerships are charging for new remotes and programming.

I'm done with ebay because the listings show new remotes, and 3 out of 3 times I've won - I end up with junk that doesn't work and won't program. First one was superglued together and cracked. Can't check the battery if you can't even open it. Second one was completely corroded inside from water and didn't work. The 3rd one only 1 button worked and it looked like someone tried to superglue the circuit board pieces back together. Each one was advertised as new, or like new and they obviously weren't anywhere close to that. The Keyles Ride site is run by one of those same lying ebay sellers, so thats off the list too.

What does your local dealership charge? I bet there's some that want even more than what mine is charging.

[sbagdon]

The local Mazda dealership quoted me $65/per, but I didn't ask for programming costs. $35/car for programming sounds about right (in whatever context "right" is, when dealing with a dealership), as that should be 1/2-hour labor charge, which is usually the minimum labor charge billing in their invoice system. Then again, it'll take them 5 minutes, so fair is in the eye of the beholder.

I'm surprised (and sorry) that you've had so much bad luck when dealing with sellers on eBay, in relations to fobs. I've not had a bad fob yet. I bought 4 fobs for my '96 Camry on eBay (bought the car used, that came with no fobs), and 2 fobs for my wife's '03 PT Cruiser (only came with 2, wanted 4 total), and all fobs I got from eBay worked great. I just closed a deal for 3 fobs for my '03.5 MSP, the car only came with 1 fob/key. I paid something like $39 for all three, shipping included, which sure beat $65/per + tax locally. I don't really care if it's "new", but working and reasonably clean sure would be nice. :)

BTW, if you happen to find out how to program the fobs, let us know. I'm going to have to find this out anyway, when the 3 fobs show up this week. Thanks!

Steve B.
'03.5 MSP


What does your local dealer charge for Mazda keyless entry remotes?

My Mazda dealer wants $99 a piece plus $35 for programming for each of my cars (MS Protege, 98 Millenia).

I'm curious to see what other dealerships are charging for new remotes and programming.

I'm done with ebay because the listings show new remotes, and 3 out of 3 times I've won - I end up with junk that doesn't work and won't program. First one was superglued together and cracked. Can't check the battery if you can't even open it. Second one was completely corroded inside from water and didn't work. The 3rd one only 1 button worked and it looked like someone tried to superglue the circuit board pieces back together. Each one was advertised as new, or like new and they obviously weren't anywhere close to that. The Keyles Ride site is run by one of those same lying ebay sellers, so thats off the list too.

What does your local dealership charge? I bet there's some that want even more than what mine is charging.

[93Miata]

Thanks for the reply. I knew the price seemed a little high. I'll check around some more and see if I can find any better deals. It was pretty disappointing with ebay that the deal seemed so great but all 3 turned out to be bogus.

[solid_snake]

BTW, if you happen to find out how to program the fobs, let us know. I'm going to have to find this out anyway, when the 3 fobs show up this week. Thanks!

Steve B.
'03.5 MSP
here you go
http://www.msprotege.com/members/solid_snake/keyless.JPG
hopefully this isn't ilegal (evil), if it is, let me know and i will revome it (braindead

[93Miata]

I don't see why that would be illegal at all...

[jrodhotrod]

If you are interested I have two factory keyfobs from my mazdaspeed protege that I used for a grand total of 2 weeks. (replaced with after market alarm)

Let me know.

[solid_snake]

I don't see why that would be illegal at all...

because i'm taking $35 away from the stealership, lol

[sbagdon]

I have to pass, right now, as I have 3 I just got off eBay that I'm going to try to program. But thanks!

Steve B.
'03.5 MSP


If you are interested I have two factory keyfobs from my mazdaspeed protege that I used for a grand total of 2 weeks. (replaced with after market alarm)

Let me know.

[sbagdon]

I tried this tonight, but I got stuck on the "press driver's button". WHICH button?!?! Unlock? Lock? Either? Both? Power window switch?

Has anyone actually gotten this to work?

Thanks!

Steve B.
'03.5 MSP


here you go
hopefully this isn't ilegal (evil), if it is, let me know and i will revome it (braindead

[solid_snake]

I tried this tonight, but I got stuck on the "press driver's button". WHICH button?!?! Unlock? Lock? Either? Both? Power window switch?

Has anyone actually gotten this to work?

Thanks!

Steve B.
'03.5 MSP
i believe it is the lock button, i don't really know how to do that in proteges, i found that in a service manual...

[93Miata]

The drivers side door switch is that little button in the door seam. You know the little button in your refrigerator that turns out the light when the door closes - same thing.

[moxnix]

The drivers side door switch is that little button in the door seam. You know the little button in your refrigerator that turns out the light when the door closes - same thing.

You have a refrigerator in your protege?

[93Miata]

Nah, I wanted that model, but the dealership was sold out at the time.

[sbagdon]

I call that the door sensor pin switch.

They could have done a LITTLE better job on describing it in the instructions! :)

Steve B.
'03.5 MSP


The drivers side door switch is that little button in the door seam. You know the little button in your refrigerator that turns out the light when the door closes - same thing.

[sbagdon]

I'll try this again during lunch, now that I know what the "driver-side door switch" is! :)

The one thing I don't like, after reading these instructions, is my impression that the keyless entry system is limited to 3 fobs. I find this suprising, as my previous '96 Camry and current '03 PT Cruiser (wife's) could both take 4 fobs. And the '03 PT Cruiser can take 8 encoded keys.

I'll try 4, and can live with 3, but I'd still like 4...

Thanks!

Steve B.
'03.5 MSP


here you go
hopefully this isn't ilegal (evil), if it is, let me know and i will revome it (braindead

[MSP #167]

cool let us know if this works.

[sbagdon]

Now that I know which switch is the "driver-side door switch", the instructions worked like a charm. And I can confirm that the keyless entry system will only take 3 fobs... when you get to the fourth, nothing will happen, until you press one of the first 3 (to close out the programming loop).

Thanks much to all who helped with this task.

Thanks!

Steve B.
'03.5 MSP

[solid_snake]

Now that I know which switch is the "driver-side door switch", the instructions worked like a charm. And I can confirm that the keyless entry system will only take 3 fobs... when you get to the fourth, nothing will happen, until you press one of the first 3 (to close out the programming loop).

Thanks much to all who helped with this task.

Thanks!

Steve B.
'03.5 MSP
good to hear we saved you $35;) :)

My tribute can take up to 4 remotes, so i also thought that the protege would take up 4 too

[sbagdon]

You didn't save me $35, as I never would have paid it. I have too many contacts in the auto-repair industry, I would have found it out sooner or later (and shared it here). You saved the other guy $35. :)

Hey, what can I say? I tried 4 remotes, each time I programmed the fobs. I had to go through 2 programming cycles, to test all 4 remotes, and tried programming 4 remotes each time. Once you program the third remote in, no remote will do anything except one of the 3 programmed.

I can learn to live with 3 remotes, but doesn't mean I have to like it. :)

Thanks for your help!

Steve B.
'03.5 MSP


good to hear we saved you $35;) :)

My tribute can take up to 4 remotes, so i also thought that the protege would take up 4 too

[solid_snake]

You didn't save me $35, as I never would have paid it. I have too many contacts in the auto-repair industry, I would have found it out sooner or later (and shared it here). You saved the other guy $35. :)

Hey, what can I say? I tried 4 remotes, each time I programmed the fobs. I had to go through 2 programming cycles, to test all 4 remotes, and tried programming 4 remotes each time. Once you program the third remote in, no remote will do anything except one of the 3 programmed.

I can learn to live with 3 remotes, but doesn't mean I have to like it. :)

Thanks for your help!

Steve B.
'03.5 MSP


no problem, i'm here to help, or at least i try to :)

[93Miata]

Great,

At least I know for sure the instructions will work when my order comes in.

[93Miata]

I found another keyless entry remote site online that I'm willing to give a shot - www.ThePartsYouNeed.com

The stupid KR site wants $49 a piece for the Protege remote, and they're less than 1/2 that price on ThePartsYouNeed site with the instructions included. I ordered 1 this morning.

https://www.thepartsyouneed.com/displayProductDocument.hg?productId=1434

I'll keep you guys posted. If it works good, I'm going to order one for my Millenia as well.

[93Miata]

I got my remote from ThePartsYouNeed.com in the mail today. 5 days isn't bad especially when one was a Sunday.

Programming was easy, took about 10 seconds. I can't believe a dealership would charge 1/2 hour of labor for a 10 second job. Thats a good way to lose customers.

Anyhow, the remote works great and when I went to put in an order for remote for the Millenia I noticed I got free shipping, so I bought a 2nd remote for the Protege and a pair for the Millenia. FINALLY, I will have remotes that work and that I can use.

ThePartsYouNeed.com rocks!

[solid_snake]

I got my remote from ThePartsYouNeed.com in the mail today. 5 days isn't bad especially when one was a Sunday.

Programming was easy, took about 10 seconds. I can't believe a dealership would charge 1/2 hour of labor for a 10 second job. Thats a good way to lose customers.

Anyhow, the remote works great and when I went to put in an order for remote for the Millenia I noticed I got free shipping, so I bought a 2nd remote for the Protege and a pair for the Millenia. FINALLY, I will have remotes that work and that I can use.

ThePartsYouNeed.com rocks!


glad everything worked out well :) (thumb)
were my instructions helpful?

[93Miata]

glad everything worked out well :) (thumb)
were my instructions helpful?

Yeah, the instructions were basically the same. I got them without the diagrams and whatnot, but it was this:


Step 1: Open driver side door and leave open.

Step 2: Lock and Unlock the drivers door using the power door lock
switch on the door

Step 3: Insert key into the ignition.

Step 4: Turn Key to ON position and return to Lock (off) position. Do
this 3 times within 10 seconds. LEAVE key in the ignition in Lock (off)
position.

Step 5: Close and open the drivers door 3 times. Leave door open after
this step

Step 6: ECU should respond by locking and unlocking the doors once.

Step 7: Press any button on remote #1 twice. ECU responds by locking
and unlocking the car doors.

Step 8: Additional remotes, repeat Step 7 for up to 3 remotes total.

Step 9: Remove the key from the ignition and the ECU will respond a
final time with a series (about 4) of door locks and unlocks.

[sbagdon]

With patience, you should have to pay more then $10-$15/per, depending on age, popularity, etc. I paid just under $10, when I ordered 3.

Steve B.
'03.5 MSP


I found another keyless entry remote site online that I'm willing to give a shot - www.ThePartsYouNeed.com

The stupid KR site wants $49 a piece for the Protege remote, and they're less than 1/2 that price on ThePartsYouNeed site with the instructions included. I ordered 1 this morning.

https://www.thepartsyouneed.com/displayProductDocument.hg?productId=1434

I'll keep you guys posted. If it works good, I'm going to order one for my Millenia as well.

[sbagdon]

Hey, dealerships are a business, and their business model requires a 1/2-hour billing minimum, even if it takes 1 minute. They'll charge you 1/2-hour, or comp it. If you do a lot of business there, they'll comp it. If not, they'll charge you at least minimum. I don't like it, so I just don't use it. If I can't find this info on the 'net, I'm not the geek I proclaim to be. :)

Steve B.
'03.5 MSP


I got my remote from ThePartsYouNeed.com in the mail today. 5 days isn't bad especially when one was a Sunday.

Programming was easy, took about 10 seconds. I can't believe a dealership would charge 1/2 hour of labor for a 10 second job. Thats a good way to lose customers.

Anyhow, the remote works great and when I went to put in an order for remote for the Millenia I noticed I got free shipping, so I bought a 2nd remote for the Protege and a pair for the Millenia. FINALLY, I will have remotes that work and that I can use.

ThePartsYouNeed.com rocks!

[yashooa]

I'll try this again during lunch, now that I know what the "driver-side door switch" is! :)

The one thing I don't like, after reading these instructions, is my impression that the keyless entry system is limited to 3 fobs. I find this suprising, as my previous '96 Camry and current '03 PT Cruiser (wife's) could both take 4 fobs. And the '03 PT Cruiser can take 8 encoded keys.

I'll try 4, and can live with 3, but I'd still like 4...

Thanks!

Steve B.
'03.5 MSP

You kids and your "FOBS" (glare)

[93Miata]

I got a notification today that one of those ebay sellers was suspended (probably for the same issue with other people). I'm doubt there is any recourse to get my money back, but at least nobody else gets burned. I found something else odd out today too. On another forum, somebody mentioned that they had pretty badly limited range with their remote, but if they aimed the remote at their chin, they could get the car to lock and unlock from about 80 ft away.

I tried it when I was headed back to my car from the mall today, and it works...lol. Probably will get brain cancer now...but it about triples the range.

[sbagdon]

I wonder if the antenna is on the red-button side of the fob, vs. the lock button side of the fob...

Steve B.
'03.5 MSP


I got a notification today that one of those ebay sellers was suspended (probably for the same issue with other people). I'm doubt there is any recourse to get my money back, but at least nobody else gets burned. I found something else odd out today too. On another forum, somebody mentioned that they had pretty badly limited range with their remote, but if they aimed the remote at their chin, they could get the car to lock and unlock from about 80 ft away.

I tried it when I was headed back to my car from the mall today, and it works...lol. Probably will get brain cancer now...but it about triples the range.

[93Miata]

Not sure...but it doesn't seem to make a difference in range if I just point the remote backwards. I guess the remotes aren't directional, they probably just send a wave of signal out in each direction.

The Millenia remotes came in last week. I just got around to programming them today. I got myself a bit confused programming the 2nd remote to the Protege, but I was skipping ahead and not programming both together instead of one at a time.

Now I have 4 new remotes, and with the few hundred $ I saved, I can buy more toys for the car.

[sweetmazda03]

hey im new. i just bought a mazdaspeed and it didnt have a key fob i need 2know what keyfob i need for the alarm system, is it 3 button or not?
sorry if this is off topic but i dont kno how 2 make a post

any help would be great

[orlandomsp]

hey im new. i just bought a mazdaspeed and it didnt have a key fob i need 2know what keyfob i need for the alarm system, is it 3 button or not?
sorry if this is off topic but i dont kno how 2 make a post

any help would be great


Yes, the remote has three buttons a black, grey, and a red one.

Welcome the the forums. :)

[sbagdon]

here's the info from my fob:

Model: 41706
P/N: BL8D 67 5RY
FCC ID: KPU41704

That was all the info I needed, to get a few on eBay.

Steve B.
'03.5 MSP


hey im new. i just bought a mazdaspeed and it didnt have a key fob i need 2know what keyfob i need for the alarm system, is it 3 button or not?
sorry if this is off topic but i dont kno how 2 make a post

any help would be great

[Chiguy_2002]

When I got My MSP a bit over a week ago, it came with two keys, two fobs. One fob was much newer than the other, but both work just fine. How many is a MSP supposed to come with? Now if I run through the programming steps with the two fobs I have, those will be the only two fobs that work for my car? Just trying to make sure I don't have a third or fourth fob out there that could potentially open my car...Thanks.

[solid_snake]

When I got My MSP a bit over a week ago, it came with two keys, two fobs. One fob was much newer than the other, but both work just fine. How many is a MSP supposed to come with? Now if I run through the programming steps with the two fobs I have, those will be the only two fobs that work for my car? Just trying to make sure I don't have a third or fourth fob out there that could potentially open my car...Thanks.

yeah MSPs come with 2 fobs

yes, if you reprogram the keyless entry with the 2 fobs you have, any other fob won't work on your car

[93Miata]

Is that it...only 2 remotes max programmed together? I thought it was like 3 or 4?

[solid_snake]

Is that it...only 2 remotes max programmed together? I thought it was like 3 or 4?
i think you can program 4 remotes in the MSP, but it came with only 2 from factory/dealer

[93Miata]

I should try to find out for sure. I wouldn't mind getting at least a 3rd remote for a spare.

[sbagdon]

The MSP will take 3 fobs. The instructions say that, and I tried 4, and I only got 3.

When programming fobs, it's an all-or-nothing thing. If you want to "add" fob, you have to start from scratch, so you must also program in any "old" fobs. If you have 2, and want 3, you must program in all 3 at that time.

Steve B.

[Stealth5]

i thought my keyless entry reciever was broken until reading this thread. thanks for the flow chart about programming

[93Miata]

Thank Steve.

I think I'll order another unit for the Protege then and get another key made.

[ProtoType5]

Damn that was easy...I just did the reprogram in like a minute....took a little bit to find the door switch, but easy as pie....only $20.00 on ebay saved my ass a lot of $$$$$$, now just need to get a new key cut and my spares are complete. (thumb)

[jflo]

sweet. i was wondering how to do this because one of my transmitters lost its memory 'cause i haven't replaced the battery in a while and i just replaced it. good information.

[Fraimr8]

My roommate just got a p5 too and when i tried this with one of my spare remotes it worked both of our cars. My other remote only works mine,so i figure the remotes must be able to be programmed for two cars or maybe more at once. Is there a way to clear the remote so it only works the one car?I had the batter out for about 5 minutes and still didnt work. gonna try it longer and see.

[solid_snake]

My roommate just got a p5 too and when i tried this with one of my spare remotes it worked both of our cars. My other remote only works mine,so i figure the remotes must be able to be programmed for two cars or maybe more at once. Is there a way to clear the remote so it only works the one car?I had the batter out for about 5 minutes and still didnt work. gonna try it longer and see.


I think you need to reprogram th system with the remotes that will only be used for that car

[Fraimr8]

I think you need to reprogram th system with the remotes that will only be used for that car

Ahhh yes! thxs bro I didnt really understand the way it worked. After reprograming my car for my one remote it worked like a charm.One controls my car the other my roomates. He was bummed when he bought his P5 and they had no remotes with the keys. So I gave him one of my old ones and hes gonna buy 2 from ebay or somewhere in the near future. Thxs again for Info!

[solid_snake]

Ahhh yes! thxs bro I didnt really understand the way it worked. After reprograming my car for my one remote it worked like a charm.One controls my car the other my roomates. He was bummed when he bought his P5 and they had no remotes with the keys. So I gave him one of my old ones and hes gonna buy 2 from ebay or somewhere in the near future. Thxs again for Info!

No problem :)

[93Miata]

Be careful getting them on ebay - when you get broken junk the sellers try to blame it on you or just dont respond anymore after they got your money.

[PlatinumMSP]

hey does anyone have a picture of what the door switch actually looks like?

[ezekiel]

the one thing that sheet doesn't say is to make sure there are no other transmitters being used in the area. And by the that sheet is exactly what the tech would do to your car if you paid them to... and no it isn't illeagal to post that seeing as how I can get that off any computer at my college, for free.

[mzdp5fan]

I got my two remotes off ebay. The diagram remote instructions didn't work for me, but the instructions that 93Miata provided worked perfectly for me.

The ebay remotes looked absolutely fine, but yes, I agree that you should always be careful on ebay.

Thanks for the help guys.

[MP5Drifter]

I need help , my keyless does't work. I followed the instructions and it would only react to my fob with a honk a flashing lights on the 3th iteration. The car's ECU will reacht to the door switch however. I 'm trying to get it to work since i bought my car, that was a month ago. I aslo replaced the battery.
Any help is welcome Thanks

[hellcat]

I have one keyless remote that has never been installed on any car. I bought it for my P5 but never used it. Pm me if interested.

[BIGANT]

What does your local dealer charge for Mazda keyless entry remotes?

My Mazda dealer wants $99 a piece plus $35 for programming for each of my cars (MS Protege, 98 Millenia).

I'm curious to see what other dealerships are charging for new remotes and programming.

I'm done with ebay because the listings show new remotes, and 3 out of 3 times I've won - I end up with junk that doesn't work and won't program. First one was superglued together and cracked. Can't check the battery if you can't even open it. Second one was completely corroded inside from water and didn't work. The 3rd one only 1 button worked and it looked like someone tried to superglue the circuit board pieces back together. Each one was advertised as new, or like new and they obviously weren't anywhere close to that. The Keyles Ride site is run by one of those same lying ebay sellers, so thats off the list too.

What does your local dealership charge? I bet there's some that want even more than what mine is charging.
What is the numbers on the back of the remote say?Reason why I asked I have 2 extra remotes that would sell to you...

[GBean]

do the remotes you buy have to match the numbers on your existing remote exactly? Cuz I found some I wanna buy, but the FCC id # doesnt match exactly. The last couple numbers are different.

[BIGANT]

From What I Understand Correctly Is They Got Match. I Asked The Service Manager The Same Thing And Thats What He Told Me

[GBean]

I got two what look to be new remotes on ebay for $18 with te same exact #'s as our originals, since i lost mine a while ago, at least somewhere in my house.
They work great, now we have three functioning remotes. Yay.
What a deal, and programming was easy. I am just bummed you can only have three.



From What I Understand Correctly Is They Got Match. I Asked The Service Manager The Same Thing And Thats What He Told Me

[ChopstickHero]

tried this and it doesn't work for my car. maybe it has to do with the wires i cut so that the factory alarm can arm when i have my greddy turbo timer running?

[BIGANT]

I got two what look to be new remotes on ebay for $18 with te same exact #'s as our originals, since i lost mine a while ago, at least somewhere in my house.
They work great, now we have three functioning remotes. Yay.
What a deal, and programming was easy. I am just bummed you can only have three.NICE! Why are u bummed about having 3?

[GBean]

NICE! Why are u bummed about having 3?

I dunno, maybe 4 would be nice...

[BIGANT]

I dun would be nice...(lol) NO SHIT HUH lol,
Do u think 225.00 bucks is too much for the stock msp racing beat exhaust from the turbo???

[GBean]

(lol) NO SHIT HUH lol,
Do u think 225.00 bucks is too much for the stock msp racing beat exhaust from the turbo???

no, depending on the shape, and would it fit on my ES? What improvement would it give?

[BIGANT]

Thats a good question I'M GOING TO MY BUDDY MAZDAMIKE. As far shape it's in I rated it 3 1/2 out of 5 star.
no, depending on the shape, and would it fit on my ES? What improvement would it give?

[tornado72]

Hope this works!
thanks

[GBean]

Should work perfectly, I have done it twice so far....

[tornado72]

I will try as soon as i get back to the states.
thanks

[Pyr0TeK]

Resurrecting this thread... :) Just wondering, if you do this to two Proteges at the same time, in sequence, in theory... you could have one remote operate two cars correct? Not sure why you would want to do that but hell it would be cool to try.

Other than that, I have a spare remote I tried to program and it would not work. It did work on my original one though so I think this extra remote that came with the car when I bought it is either the wrong model (?) or is just bad because I even swapped the batteries and my old one still worked but could never get the new one to attach to the ECU.

[Croc69wheat]

I have a 04' mazda 6 and im having the same sort of issue. all of a suddon i was trying to unlock my trunk and it stopped working. so ive tried the steps and when i get to the last step of pressing the keyless entry button and taking the key out the ECU is supposed to open and lock 4 times. It only does it two times and then the keyless still doesnt work.

anyone have any suggestions?

[Croc69wheat]

sweet i will try that

[JB50]

Hey I need those if you still got em I live inj Hawaii what you want for em PM me Yhanks

[darrylhadfield]

Okay, here's an oddball question for anyone reading...

What if you purchase a slightly 'off' transmitter? My GF's got an '00 Protege that we're touching up, and I snagged a second transmitter from Ebay for $8. When it got here, it wasn't as advertised (so I'll send it back if it doesn't work) but.. it's for an '02 Protege. I suppose I can give it a shot and see what happens.. Any feedback in advance would be useful, though.

Thanks!

D.

[GBean]

Be sure to let us know if it works.

[Ricktalife]

i work at a honda dealership and we don't charge to program remotes...(fu) mazda dealerships.

[darrylhadfield]

Dammit.

Well, if anyone has an '02 Protege they need a keyless remote for, I've got one for sale - because it won't work for our '00 protege. :(

I confirmed that the battery's good (swapped it with the battery in my gf's remote on her keychain) and it's no joy.

MAKE SURE YOU BUY THE RIGHT PART!

D.

*edit* the programming instructions worked like a charm to re-program the older remote, though!

[xxstriderhiryux]

Thank you solid snake .. you saved my worthless remote

[darrylhadfield]

Anyone have a spare, for a 2000 Protege, that they' dlike to unload? I have now found out that only ONE of our remote keyless units works.. the other one's fried. :(

D.

[tcrawford97]

If you are interested I have two factory keyfobs from my mazdaspeed protege that I used for a grand total of 2 weeks. (replaced with after market alarm)

Let me know.

was wondering if you still have these keyfobs available. just bought my msp spicy orange '03 and didnt come with any remotes. let me know if they are that would be awesome!?!?!

[tweakingmsp]

was wondering if you still have these keyfobs available. just bought my msp spicy orange '03 and didnt come with any remotes. let me know if they are that would be awesome!?!?!

This tread is 5 years old. Check ebay, thats where I bought my extra one.

[elielc1]

Just wanted to let you know the instructions worked fine for my remote! Thanks!



here you go
http://www.msprotege.com/members/solid_snake/keyless.JPG
hopefully this isn't ilegal (evil), if it is, let me know and i will revome it (braindead

[biz]

lol @ super old thread... but i did this about a month ago and it worked for me as well... maybe sticky this? very useful information.

asked the dealership how much it would cost them to do it... they told me $70!!!!!!

[hornsfan10609]

I have tried this for a week now and it WON'T work. I can't figure out what i'm doing wrong.

[habu87]

I just had to do this. I have a TT installed (and the two wires cut to arm the alarm while the timer runs). The car refused to go into programming mode until I reconnected the blue wire at the keyless module under the rear deck. Thought I'd share in case someone out there still runs the stock alarm... :)

[hornsfan10609]

I just had to do this. I have a TT installed (and the two wires cut to arm the alarm while the timer runs). The car refused to go into programming mode until I reconnected the blue wire at the keyless module under the rear deck. Thought I'd share in case someone out there still runs the stock alarm... :)

Thanks for helping me figure out why I can't program mine, I knew the turbo timer may have had something to do with it.

[SCMP3]

pics of the wires? my car came with a tt and ive never been able to program my remote

[hornsfan10609]

I dont have any pics but just fold down the back seats, remove the clips for the rear deck and pull up on it and there is a white box with a harness plugged into it. There is blue wire with i believe a white or silver stripe that i had to reconnect, this wire lets you lock the car when its running. I like having working remotes now.

[SCMP3]

Ill have to check it out when I get the car back together.

[Speed3.5]

Does anyone have schematic of the stock MSP alarm system , would like to get it uninstalled and install new aftermarket , just in case so it won't interfere with new alarm.

[1326]

I bought a 2003 mazdaspeed protege, no key fob with it when i got it, tried the instruction on programing and it worked. so how do i find out what number i need on the key fob?

[hornsfan10609]

What do you mean what number on the key fob? You said you programmed the key fob and it worked?

[1326]

I tried the programing, I have no fob, just made sure I could do it. Is there a certain number I need for the my car? On the fob that is.

[Cleverfrog]

when I press a button on my fob the cars lights show it's working but, the doors don't lock or unlock. Anybody have a wiring diagram so I can fix this issue?

[hornsfan10609]

I tried the programing, I have no fob, just made sure I could do it. Is there a certain number I need for the my car? On the fob that is.
No any remote can be programmed.

[SCMP3]

heres what im working with

http://i186.photobucket.com/albums/x187/pvbgamer/IMAG0674.jpg
http://i186.photobucket.com/albums/x187/pvbgamer/IMAG0675.jpg
http://i186.photobucket.com/albums/x187/pvbgamer/IMAG0676.jpg

what needs to be changed

[hornsfan10609]

http://i44.photobucket.com/albums/f27/94cobra320/IMAG0674.jpg If the circled wire is cut, reconnect it to the other end of the wire.

[SCMP3]

wait maybe im retarded. where is the other end?

[SCMP3]

so that wire isnt cut.....

http://i186.photobucket.com/albums/x187/pvbgamer/IMAG0691.jpg

[manny122]

you can look it up on you tube

[hornsfan10609]

so that wire isnt cut.....

http://i186.photobucket.com/albums/x187/pvbgamer/IMAG0691.jpg
Trace it as far as you can to make sure, then check the orange wire in the alarm harness under the dash.