my 6s on the rollers

[White 6s]

videos of when i dyno'd my 6..

if you're on the other 6 boards you may have seen them already

3rd gear pull:
http://home.attbi.com/~ashraf.shabudin/mazda6/eddyno1.avi

4th gear pull:
http://home.attbi.com/~ashraf.shabudin/mazda6/eddyno2.avi

best was 176.3 whp and 172.0 torque

[Darin]

have scanned copies of the dyno printouts?? :)

[White 6s]

Originally posted by Darin
have scanned copies of the dyno printouts?? :)

yes i do..the're not scans..but took pics of the charts.


http://www.massimoperformance.com/images/ed/withairbox.JPG

http://www.massimoperformance.com/images/ed/noairbox.JPG

[Darin]

wow! thanks! I'm a little concerned, however, as that shows ~ 20% drivetrain loss...when compared to factory rated HP. Do you know what the correction values were for your pulls? have the "Actual Numbers"?

[White 6s]

most front wheel drive cars with manual trans are about 15-18% drivetrain loss. i'm sitting right about 20% which isn't too bad.

i'm just glad for most everyday driving they under rated torque. a 20% loss of torque would be 153.6. i dyno'd 169.4 wich is less then a ~12% loss.

the 6 has a great torque curve. when i start modding engine wise hp will generally be gained in the high end. so i'm not too worried. plan to do intake/header(S) :D and exhaust. and if ain't enough...try and squeezer a blower/charger in there. if i can break 200whp with those mods, minus the charger i'll be happy.

[Darin]

Originally posted by Orange Speed
most front wheel drive cars with manual trans are about 15-18% drivetrain loss. i'm sitting right about 20% which isn't too bad.

i'm just glad for most everyday driving they under rated torque. a 20% loss of torque would be 153.6. i dyno'd 169.4 wich is less then a ~12% loss.

the 6 has a great torque curve. when i start modding engine wise hp will generally be gained in the high end. so i'm not too worried. plan to do intake/header(S) :D and exhaust. and if ain't enough...try and squeezer a blower/charger in there. if i can break 200whp with those mods, minus the charger i'll be happy.

yeah, the tq curve looked nice...but I'd never think a fwd, which is more effecient at transfering power that rwd, would ever lose MORE than 15%...but (shrug)...it's Nice to see some raw numbers!

way to go! :D

[Antoine]

Great post Orange Speed! (thumb)

It's nice to see dyno vids and charts on this new model.

What are the 0-60 and 1/4 mile #'s for the v6 w/ stick?

What is the curb weight?

Thanks for sharing your dyno info...keep it coming! :D

[turbolsd]

Motortrend got the 0-60 at 6.67 and 1/4 mile in 15.1.

[White 6s]

weight is also of the vehicle is 3243 for the base model 6 cyl. about 200 lbs less for the 4 clyinder