Will the stock Mazda 6 wheels fit on my 98 626?

[mazza]

Looking to dump the cheap aftermarket wheels that the previous owners put on the car. OEM is fine.

Thanks,

[seanmcsean]

which ones are you thinking about.. the 16's or the 17's? if you're thinking 16's, the racing harts off of the mazdaspeed protege may fit.. I've seen people throw them on the 6 for fun. find me the bolt pattern on your 626 and I'd be able to tell ya.

[Da 6]

second we can confirm that and the offset we can sey yes or no. Only info I found so far was 1 set of rims on ebay fitting a 3,6,8 and 626 but i'm not gonna fully rely on that. ;)

[ZoomZoomH]

all 5-bolt mazda wheels should have the same bolt pattern and hub diameter, so it's just a matter of figuring out the offset of the wheels and see if it will clear the wheelwells :D

[Da 6]

all 5-bolt mazda wheels should have the same bolt pattern and hub diameter, so it's just a matter of figuring out the offset of the wheels and see if it will clear the wheelwells :D There ya go..it fits the lugs now see if they clear the fenders. Last resort is see if the seller will alow you to instal 1 tire and drop the car off the jack to observe the tires position in refrence to the inner fender(s)