Going Back To Stock Sale!!!

[jurgs01]

STUFF STILL FOR SALE:



Defi Boost BF “blackout” amber boost gauge with control unit II $220


Perrin J-pipe back exhaust w/extra o2 bung for wideband and flex-pipe $450 + your axle-back and all of your gaskets


SOLD ITEMS

DG motorsports CF Strut bar $95 + your stock strut bar and brackets(sold)



03 MSP intake manifold (perfect shape) $120 (sold)


DG motorsports CF valve cover $120 + your stock valve cover (sold)

DG motorsports CF Grill $100 + your stock grill (sold)

DG motorsports CF mirror covers $35 (sold)

Blue Nology Plug wires $100 + your stock plug wires (sold)

Spal fans $150 (sold)

GT28rs Turbo with ported/polished inlet and Turbohoses 3” to 2.5” silicon reducer (used for 250 miles) $600 plus your stock turbo. (sold)

Mam Jet-hot coated manifold $500 + your stock manifold and cover (sold)

AEM wideband o2 Sensor $250 (sold)

MPI tuner with turbo module and software $450 (sold)

Turbohoses SMIC $400 + your stock SMIC (sold)

Turbohoses hardpipes w/greddy type-S BOV setup for dual BOV/BPV setup (minor scratches or I would be charging more) $350 + your stock piping (sold)

03 MSP 2-gauge holder with MSP emblem laser-etched $10 + your stock under radio cubbie thing & bracket(traded)

Mam fuel rail w/ fittings (never used) $110 (sold)

Kartboy exhaust hangers $20 (sold)

Boostsciences DS-1 MBC kit (never used) $100 (sold)

Boostsciences Reflex diverter valve (never used) $65 (sold)

Turfburn’s Throttle body and IM thermal spacers $55 (never used) (sold)

Mazda full rebuild gasket set $25 (never used) (sold)

Autometer 2 gauge full a-pillar (never used) $20 + your stock a-pillar (sold)

ffice:office" /><O:p></O:p>

<O:p></O:p>

If someone wants to do a local switch for my custom painted DG motorsports ram-air hood with AEM intake modified to fit the MSP I will do that locally for $500. I would need your stock intake.

<O:p></O:p>

All of these prices include shipping (to cont. US). PM me for out of country shipping. If I require your stock part (it must be in good/working shape) and must be shipped immediately following the receipt of the part from me at your charge (must be FEDEX or UPS with tracking number). I don’t want any delays. I will provide you with tracking numbers immediately. Everything that came with instructions to me will ship with instructions to you.

<O:p></O:p>

These prices are fair and non-negotiable. There are some deep discounts on almost brand new or new pieces. THE FIRST PERSON TO PM ME ON A PART WITH HAVE DIBS. I will not count posting on this thread. Everything is on the vehicle now (why there is no pictures), but I will disassemble everything on Saturday and post pictures if you need them. There is plenty of pictures and posts of my car on the forums, but I will take pictures of the car with a forum name piece of paper if need be. EVERYTHING BOUGHT BEFORE THE END OF THIS WEEKEND WILL SHIP OUT MONDAY, SEPT. 12<SUP>th</SUP> with tracking #.

<O:p></O:p>

Why am I selling these? I just bought a washer and dryer, and I had to call my friend to come help me with his truck. My girlfriend convinced me that it would be more practical to have a truck and a sedan instead of two sedans like we do currently, so I am going back to stock and trading for a 2006 Toyota Tacoma.

[jurgs01]

This must be a bad time of day I haven't even gotten one view.

[Ryoga28]

Does the DGM Engine Cover have the msp decal?

Also does the reflex valve come with the tubings needed to install?

[jurgs01]

The DGM cover has the DG Motorsports decal, and the diverter valve does not have the fittings.

[Ryoga28]

The DGM cover has the DG Motorsports decal, and the diverter valve does not have the fittings.
Ok, I'll pass. Thanks

I think everyone is having a BBQ or something.

[SubXer0]

i'll take the mirror covers shoot me a pm with payment info i'll pay you right now
peace
dante

[Dexter]

This must be a bad time of day I haven't even gotten one view.

I viewed and I want that manfold, but my stock one has a hairline crack in it...
(hand) :(

[sly mantis]

Pm sent on gaskets and exhaust hangers

[Protege2K]

This must be a bad time of day I haven't even gotten one view.
It's beer thirty on Labor Day. Everyone is too drunk to post right now. Free bump.

[PRO2NR]

Dibs on Wideband and Din Panel

[Ryoga28]

Here's some pics of Jurgs01's car...Love that manifold
http://www.msprotege.com/forum/showthread.php?t=118974&highlight=nology

http://www.msprotege.com/forum/showthread.php?t=101288

[digitalpro5]

Whats the condition of the CF grill?

[Protege_Speed]

Is the Intake Manifold you're selling the ported/polished one with the VTCS removed?

[jurgs01]

Whats the condition of the CF grill?

Almost perfect. I will post pics after I take it off on Saturday.

[dominoy2k1]

Mazda full rebuild gasket set $25




what is that?

[jurgs01]

Mazda full rebuild gasket set $25




what is that?

An engine gasket set. Protegegarage sells them.

[dominoy2k1]

so its dif from a headgasket kit?

[jurgs01]

Alright guys. I need to do some HW for the next few hours. If you want something PM me and I will PM you back when I come back online.

[Protege_Speed]

What about my question? I think you skipped my question about the Intake Manifold.

[vodapas77]

*Subscribes*

Turbo and the spacers are really tempting, but I won't have the bank for that till October. I'll just keep my eye on this thread.

[jurgs01]

What about my question? I think you skipped my question about the Intake Manifold.

I caught this just before I went offline. It is not ported/polished yet, and it still has the VTCS. That was my intention when buying it, but I haven't done it yet. It is in perfect condition for someone who would want to do that.

[jurgs01]

I just got 5 pm's, but I really need to go offline and do my HW. I'm not ignoring, but I will answer everyone's questions in a couple of hours.

[azian6er]

dibs on mpi. i need it.

SHould have money this week.

i will pm you.

-Bryan

[jurgs01]

Just to let people know, I will give the people with first dibs on items until tommorrow to either pay or contact me with their intentions, then I will go to the 2nd dibs people, and so on.

[ghettobubba2001]

interested in grille

[SubXer0]

sent money for mirror covers
peace
dante

[PHRiSCo]

Sent money for fuel rail! Yay more MAM stuff!

[Crazee D]

Dibs on fans and spacers...
PM sent

[Brian MP5T]

Holy BLOW OUT!

[MP5_509]

2nd dibs on kartboy hangers.

[jurgs01]

2nd dibs on kartboy hangers.

Send me a PM. I am not going to go back and forth to see whether the poster on the thread was first or the PM. Only PMs will get the items. So far there are a lot of dibs, but only the three items labeled sold have been paid for. That's why I'm giving all the first dibs a time limit (tomorrow).

[atticus1398]

you should trade her in.

[jurgs01]

you should trade her in.

That's why I'm going back to stock;) I doubt the Toyota dealer would see the true value of a GT28rs turbo and Mam manifold. I've put about $9 to 10k into this car, so maybe I will recover $3 to 4K before getting raped on my trade in.

[digitalpro5]

dibs on CF Grill, pending of course on pictures, and explination of "almost perfect" :-D

[joka1]

i thinhk you are the 3rd in line for the grill!!!!

[jurgs01]

dibs on CF Grill, pending of course on pictures, and explination of "almost perfect" :-D

There is already three in line on the grill. Almost perfect means that it is perfect from what I can see now, but I will have to take it off to inspect the underside and back. I can only see the top and front when it is installed.

I have a long list of stuff I have to uninstall (as you can see by the list), which is why I have to wait until Saturday. Everything will be done as per instructions of first page.

[joka1]

what color is the turbo timer?

[jurgs01]

what color is the turbo timer?

Black. It is the one with RPM/speed input, 0-60 time, 1/4 mile time ect. The higher end one:)

[mazdaspeedpower]

I would've viewed sooner but I was busy getting payed double and a half for working holiday.

[joka1]

i will think abt the tt

[MSPHAWAII]

well lang i will let you know how the turbo and mpi are i just got them hahhahh .... hit me up some time for the info.. justin .







*Subscribes*

Turbo and the spacers are really tempting, but I won't have the bank for that till October. I'll just keep my eye on this thread.

[mazdaspeedpower]

MMMMM, valve cover:D. Excellent.

[jurgs01]

I updated the first post with a few requested pics, and then attached a few to this post. Sorry about the dirty car, but the items will be cleaned before they are shipped. I was going to paint the 03 MSP gauge bracket black and put frosted plastic behind the mazda emblem, but I never got around to it. I think it would look good like that.

[^tyrant^]

dibs on Turbohoses hardpipes w/greddy type-S BOV setup for dual BOV/BPV setup

sending pm

[jurgs01]

dibs on Turbohoses hardpipes w/greddy type-S BOV setup for dual BOV/BPV setup

sending pm


Got it. If all the dibs don't fall through, I might sell everything on a Sunday night. That would make everything much more simple:)

[^tyrant^]

ok i call dibs on both the turbohoses stuff, SMIC and hardpipes


EDIT:

payment sent.

[MP5_509]

Send me a PM. I am not going to go back and forth to see whether the poster on the thread was first or the PM. Only PMs will get the items. So far there are a lot of dibs, but only the three items labeled sold have been paid for. That's why I'm giving all the first dibs a time limit (tomorrow).
No worries mate. im actually gonna retract my "dibs"s o you have nothing to worry about. I was gonna try and pick them up for a friend but he said dont worry about it. Good luck with the sale

[jurgs01]

Alright, I am offline for the night. Things marked in red sold have been paid for and are sold. The DG CF grill has like 5 dibs on it, and Joka is very serious about wanting it with 2nd dibs, so no need to send me PMs about that. All other items not marked sold have at most 2 dibs, some one, and a few none. I know from the first time I parted out my MSP that dibs fall through, so if it doesn't have a SOLD next to it PM me and I will put you on the list. The guys who have called first dibs (meaning I have sent you paypal info) all have until tomorrow to pay or state their intentions or I go to the next dibs. All who I have dealt with have been awesome, and I will return the favor by getting everything taken apart/cleaned and packaged up well on Saturday. I will then ship everything and send tracking #s on Monday, the 12th (as I said in the first post). Hope everyone enjoys the parts. I was close to having an awesome MSP, but reality set in that I am 24, getting commissioned in a year (my friends say a naval officer having a CF hood in unprofessional:mad: ), and I need a truck.

[jurgs01]

No worries mate. im actually gonna retract my "dibs"s o you have nothing to worry about. I was gonna try and pick them up for a friend but he said dont worry about it. Good luck with the sale

Tri Cities? Not too far away. Sure you don't want a custom painted DG motorsports CF hood with ram-air intake:) J/k.

Now I am really offline.

[Dexter]

that I am 24, getting commissioned in a year (my friends say a naval officer having a CF hood in unprofessional:mad: )

what is so "unprofessional" about a carbon fiber hood?

Your friends are tardo.

[wicked]

what is so "unprofessional" about a carbon fiber hood?

Your friends are tardo.


but it's fine for a bussiness exec,old guys,oh and a friend of mine who has been in the marines for 6 years with a turbo focus on 18's,and another friend in the coastgaurd with a CF hood on his STI.


you got issue's,your just showing how much you love the freedom of the US by having a car setup how YOU want it.

instead,your going to comform and show freedom doesn't mean shit,because you need to fit in.

[wicked]

come this far to go back to stock,how lame.

[jurgs01]

Being professional wasn't the only reason I am selling my car, just one of many that hit me at the same time. The main one was always having to call friends to anytime I had to haul anything (which seems to be often). Plus, I think I am going to buy a 68 Camaro SS and mess more with that. I'm not done with cars, and I knew all along that the MSP was just a practice car even though I did orginally intend to keep it.

[jurgs01]

Bump. I am giving the first dibs guys until noon (west coast time) to either contact me or pay, then I am going to the second dibs guys.

[jurgs01]

One edit from my first post of instructions. I will no longer take MOs. Paypal only.

[CasopoliS]

I guess I will call dibs on the DG CF grill as well, though it will probably get sold to one of the others. I am also interested in the AEM WB O2. PM sent.

[jurgs01]

The following items have received no dibs:

DG motorsports CF Strut bar $95 + your stock strut bar and brackets ($295 new great deal!!)

Perrin J-pipe back exhaust w/extra o2 bung for wideband and flex-pipe $450 + your axle-back and all of your gaskets (900+ new without bung for wideband)

Defi Boost BF “blackout” amber boost gauge with control unit II $220 ($350 new $250 for gauge and $100 for control unit II)

03 MSP 2-gauge holder with MSP emblem laser-etched $10 + your stock under radio cubbie thing & bracket ($30 new and no longer produced)

Boostsciences DS-1 MBC kit (never used) $100 ($140+shipping new for group buy price)

Boostsciences Reflex diverter valve (never used) $65 ($125 shipped new)


I am very surprised because these are great deals! I will sell them on e-bay if they don't go here, but I would prefer to sell them here especially with the top two items that I need a trade in. Bump.

[wicked]

Hmmm,I'll see what I can do about the strut bar,I have to compare some photo's to see if it will fit with my secondary injectors.


The following items have received no dibs:

DG motorsports CF Strut bar $95 + your stock strut bar and brackets ($295 new great deal!!)

Perrin J-pipe back exhaust w/extra o2 bung for wideband and flex-pipe $450 + your axle-back and all of your gaskets (900+ new without bung for wideband)

Defi Boost BF “blackout” amber boost gauge with control unit II $220 ($350 new $250 for gauge and $100 for control unit II)

03 MSP 2-gauge holder with MSP emblem laser-etched $10 + your stock under radio cubbie thing & bracket ($30 new and no longer produced)

Boostsciences DS-1 MBC kit (never used) $100 ($140+shipping new for group buy price)

Boostsciences Reflex diverter valve (never used) $65 ($125 shipped new)


I am very surprised because these are great deals! I will sell them on e-bay if they don't go here, but I would prefer to sell them here especially with the top two items that I need a trade in. Bump.

[TheJohnny]

pming you now about exhaust.

[MP5_509]

Tri Cities? Not too far away. Sure you don't want a custom painted DG motorsports CF hood with ram-air intake:) J/k.

Now I am really offline.

Ha how much....im friggin broke. (rant)

[jurgs01]

Bump.

[Paul]

if you find a stock manifold then i'll buy your mam one.

[jurgs01]

if you find a stock manifold then i'll buy your mam one.

If I could get a stock mani I would be selling the MAM for about $650 (I sold my stock one for about $150, and I figured that into the price of the MAM).

[mspeed101]

hmm I need this manifold! pm sent

[jurgs01]

Just updated the first list. Almost everything! Big bump on selling the items I need trades for (namely the CF strut bar and 03 MSP gauge din). I will trade someone straight up the gauge din for their stock black under radio din and bracket. I'm not going to go any lower on the strut bar though. That's already an awesome deal.

[wicked]

ok,I will do the gauge din,PM me the address I need to ship mine to,and I will do the same.

I would do the strut bar,but it doesn't look like it will fit with my secondary injectors.

[MsP_DeViL]

I will take the MBC

[jurgs01]

I will take the MBC

PM me. It's the boostsciences kit. Everything you need to install.

[goku4658]

i hate that i saw this thread about 3 days too late...

[kicker22705]

^^^ uh crap me too.

[jurgs01]

i hate that i saw this thread about 3 days too late...

I still have a few more things:) Plus, there is a guy in Hawaii who has a few more mods than me doing the same thing. Dunno if shipping will be more.

[jurgs01]

Not that I want to take away from my sales (because my deals are obviously the best:) ), but for those who missed out on parts of mine and are subscribed to this thread here is:

http://www.msprotege.com/forum/showthread.php?t=120473

and

http://www.msprotege.com/forum/showthread.php?t=120423

Oh, and bump for sale of the parts I have left.

[bestmazda01]

more pics of the a pillar? i'm interested... pics of how it was mounted

[jurgs01]

more pics of the a pillar? i'm interested... pics of how it was mounted

That's not the pillar I am selling. I have an unopened autometer 2-guage pod full a-pillar that is unused that I am selling. The one that is currently installed (with the defi gauge in the pic) is something I fabricated with my stock a-pillar and a single gauge holder. There is one guy with dibs on the 2-gauge pillar who am I waiting on payment from.

[goku4658]

Not that I want to take away from my sales (because my deals are obviously the best:) ), but for those who missed out on parts of mine and are subscribed to this thread here is:

http://www.msprotege.com/forum/showthread.php?t=120473

and

http://www.msprotege.com/forum/showthread.php?t=120423

Oh, and bump for sale of the parts I have left.

you, sir, are a gentleman and a scholar. wish i could have gotten some of your parts...you goin back to stock or gettin rid of the speed?

[jurgs01]

you, sir, are a gentleman and a scholar. wish i could have gotten some of your parts...you goin back to stock or gettin rid of the speed?

Speed is getting traded in for a 2006 Toyota Tacoma (the dark blue one with a V6 & LSD).

[goku4658]

oh sweet, thats a nice truck!

[Brian MP5T]

Bitchn' Truck!

[bestmazda01]

have fun filling it with gas.

[jurgs01]

have fun filling it with gas.

26-30 MPG on the MSP of 93 octane is not much different than 20-23 MPG on the truck of 89 octane. At least not for the short distances I drive. We have a 2003 Olds Alero for longer trips.

[wicked]

Atleast you have good taste in trucks.

[jurgs01]

Bump. Getting close to disassembly day.

[jurgs01]

Atleast you have good taste in trucks.

You're not going to see me in a ford f-150 or any ford for that matter. Maybe a Chevy Silverado Diesel with a heavy-duty allison automatic transmission, but only when I get a boat or camper.

[^tyrant^]

heh, i for one cant wait for disassembly day.

and i do love the truck you choose

[Crazee D]

update on shipping status?

[jurgs01]

update on shipping status?

Read my first post, or the message I sent you with payment information. All say the same thing. I tried to be as clear and upfront as possible. Parts all come off on Saturday, will be cleaned and packaged, everything will be shipped out Monday with tracking #s e-mailed to everyone on Monday night.

[Brian MP5T]

GT-28Rs

[jurgs01]

Bump for sale of last few items!!!

STUFF STILL FOR SALE:

03 MSP intake manifold (perfect shape) $120

Defi Boost BF “blackout” amber boost gauge with control unit II $220

Perrin J-pipe back exhaust w/extra o2 bung for wideband and flex-pipe $450 + your axle-back and all of your gaskets

DG motorsports CF Strut bar $95 + your stock strut bar and brackets

[^tyrant^]

damn quit temping me with that DG strut bar, ive done spent too much with you.

heh

such a great price cant beleave its still for sale.

[jurgs01]

Me neither. I though that would go fast since it's at a fraction of what DG sells it at.

[^tyrant^]

ya i would take it, but i just spend $80 to register for nopi next week, and ive done maxed out a brand no credit card $2200 limit!! just got it monday.

[jurgs01]

ya i would take it, but i just spend $80 to register for nopi next week, and ive done maxed out a brand no credit card $2200 limit!! just got it monday.

I think that's smart. Impulsively buying with credit can be bad.

[brealmp3]

interested in strut bar! but i have to see when my pay day is.

[boomergt]

PM sent!

[wicked]

I know a lot of people that have scewed them selves this way.


ya i would take it, but i just spend $80 to register for nopi next week, and ive done maxed out a brand no credit card $2200 limit!! just got it monday.

[^tyrant^]

i got 15 months no interest so its not a problem, ill have it paid off way before then.

and the main reason its maxed is i moved some other cards to it, because of the no interest deal. so i saved alot in the long run.

[jurgs01]

Bump for sale of last two items!

[kicker22705]

i can't believe nobody is jumpin on the Perrin exhaust. 450 shipped is dirt. i paid almost 2ice that for mine. free bump for you :)

[jurgs01]

Bump for sale of final two items!!! Car comes apart and everything gets packaged up tomorrow.

[MazdaSpeedSter]

(spin) PM'd perrin "¿"
wonder why these aren't selling. even for like 50% off...(freak)

[jurgs01]

Got off to an early start this morning (as promised). About half the parts are off. Here is a pic of the pile of goodies coming to you guys. I have to take a break to watch the Notre Dame vs. Michigan game, then back at it:)

[jurgs01]

Notre Dame beats #3 ranked Michigan at Michigan!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[MazdaSpeedSter]

cause they eat too much cheeze...(silly)

[jurgs01]

Alright guys. I worked hard to get as many ready as I could before FEDEX closed and got eight packages shipped out today. If you received a tracking number to the e-mail you paypaled me from, then it was shipped today. If not, it will still ship Monday as promised. If you are sending me your stock part I would appreciate you sending it as quick as possible after you receive the part from me (would help a lot). My address should be on the box I sent you. If you want to send it earlier, that would be great (PM me for address). Thanks. Everyone's been great with this, and I have had a minimum amount of problems with people. I packaged everything pretty well. The lady at the dollar store thought I was pulling a college prank coming to the counter with 8 rolls of packaging tape/3 rolls of saran wrap/box of ziplocks:) That combined with a bag of popcorn from UPS and the large amount of packing material I have saved have made packaging easier.

[jurgs01]

Everyone who ordered parts and has paid will have their parts shipped out Monday. They are all in boxes with labels ready to go (man that was a long day). There are a couple of exceptions that will not go out Monday (waiting for payment to clear paypal, or the guy who is in the process of moving).

[joka1]

pm replied, btw both tracking # didnt work but i am not worried on this deal since i could just drive their!!!! your part will be sent out on monday!! (next that is) since i had to make a trade of my auto exe grill for a stock 1

[wicked]

I'll ship the cubby for onder the dash monday,cool?

[Brian MP5T]

The SMIC is so Cute!

[^tyrant^]

pm replied, btw both tracking # didnt work but i am not worried on this deal since i could just drive their!!!! your part will be sent out on monday!! (next that is) since i had to make a trade of my auto exe grill for a stock 1

the tracking number will take awhile till it shows up in there system, it should be working by monday tuesday at lastest.


pm replied, The SMIC is so Cute!

yes it is, and its all mine along with the hardpipes, cant wait to get them.

[jurgs01]

I'll ship the cubby for onder the dash monday,cool?

That's the same time I'll be shipping mine. And go Bills!!

[Brian MP5T]

yes it is, and its all mine along with the hardpipes, cant wait to get them.

It looks alot thicker than the OEM... The Plastic OEM Endcaps should have never been allowed to leave Japan!

(alright)

[Ryoga28]

You'll love that smic. It's functional and not too excessive.

[jurgs01]

You'll love that smic. It's functional and not too excessive.

It's a great SMIC. That was one of my favorite mods. I had a lot of good ones too.

[jurgs01]

Alright. All packages have shipped out except for one I am waiting for money to clear paypal, one that I'm waiting on a new address for someone who is moving, and one that wouldn't let me ship to Canada in the Priority mail box I had it packaged in (load of crap). Everyone who's package has been shipped has received a Fedex tracking #, a USPS delivery confirmation #, or a customs label #. Hope you all enjoy your parts. BTW, I still have the Perrin exhaust and the Defi BF blackout boost gauge with control unit II for sale. I will put them up on ebay soon.

[MazdaSpeedSter]

It looks alot thicker than the OEM... The Plastic OEM Endcaps should have never been allowed to leave Japan!

(alright)http://www.msprotege.com/members/MazdaSpeedSter/Ford%20Problem.JPG

[wicked]

Alright. All packages have shipped out except for one I am waiting for money to clear paypal, one that I'm waiting on a new address for someone who is moving, and one that wouldn't let me ship to Canada in the Priority mail box I had it packaged in (load of crap). Everyone who's package has been shipped has received a Fedex tracking #, a USPS delivery confirmation #, or a customs label #. Hope you all enjoy your parts. BTW, I still have the Perrin exhaust and the Defi BF blackout boost gauge with control unit II for sale. I will put them up on ebay soon.

I'd be down for the exhaust,but I already have a thermal R&D

[Ryoga28]

I'd be down for the exhaust,but I already have a thermal R&D

why don't you sell the thermal research?