underglow

[ZeroLimits]

i was just wondering where i would install the underglow kit for my car. i have a 01 pro sedan.. like where underneath the car should i install the lights.. pics are helpfull

[joka1]

my side tubes (led's now but anyway) are right inside the pinch welds, i just drilled holes and ziptied them in. i have had no problems in 2+ yrs. my front and back are diffrent so my install wont help
rob

[truplayax14]

i just installed mine (for the sides) into the underbody, far enough back so that the tubes cant been seen, and for the front, it is a pain in the @$$... I had to cut part of the plastic holding the front bumper on (if i get a chance i'll post some pics, the back i just screwed it into the plastic reinforcement the bumper is on.

[truplayax14]

OK for the front i used the screw holding in the fog light to mount the light, i used some plastic and drilled holes to keep in place along with clips that came in my kit.

http://www.msprotege.com/members/truplayax14/100_1792.gif

[truplayax14]

hope I helped some....

[DongTran]

don't do it!

[EcLites]

don't do it!

dont do what? (uhm)

[Brian MP5T]

Neon/led

[Prodigy]

don't do it!
:)