PDA

View Full Version : motormounts


MIA protege
07-20-2005, 07:20 PM
anyone know if someone sells motormounts for our cars ?
mumshquat
07-20-2005, 07:48 PM
have you called any parts places? they should all carry them, and if they don't have them in stock they can get them...autozone, pep boys, car quest...............i just seached it on autozone online and they can get it special order.
MIA protege
07-20-2005, 09:13 PM
aftermarket ?
Sky_high
07-21-2005, 01:54 PM
AWR Motor Mounts fit! (for the front anyway)

Or just modify your current mounts with 3M Window Weld (I had to do that for the rear)
steve_protege
08-02-2005, 10:23 AM
Yeah, I hear the AWR mounts are high quality too. I have both the front and rear mounts, but haven't put em in yet. Im still looking for the side mounts or the inserts at least before I put in my front and rear. Id like to get everything in on one shot.
JCell
08-02-2005, 10:25 AM
i used to have both front and back, but due to warranty issues i had to remove the rear one


i miss it dearly!
steve_protege
08-02-2005, 10:28 AM
i used to have both front and back, but due to warranty issues i had to remove the rear one


i miss it dearly!


How much different did the car feel when you had the two in? How much different is it now with only the front in?
JCell
08-02-2005, 07:49 PM
None: wheel hop, no launching ability, POS

With both: rough idle WITH AC ON, if it's off it feels normal, FREAKIN AWSOME RIDE, shiftin, power, WOT, corner acceleratuon, everything was amazin!


With Front only: still a rough idle but not like b4, some wheel hop, but if I launch right, it doesn't happen, still an improvemnt over stock



hopes this helps
steve_protege
08-03-2005, 10:37 AM
Yeah, helps alot. How long did it take you to put on both your mounts? Did you ever have the side mounts/inserts as well?




None: wheel hop, no launching ability, POS

With both: rough idle WITH AC ON, if it's off it feels normal, FREAKIN AWSOME RIDE, shiftin, power, WOT, corner acceleratuon, everything was amazin!


With Front only: still a rough idle but not like b4, some wheel hop, but if I launch right, it doesn't happen, still an improvemnt over stock



hopes this helps
JCell
08-03-2005, 10:51 AM
i'm gettin the side mounts to compensate for not having the rear one


front took me 5 minutes, rear i paid 100 to put it in and 100 to take it out :(
MIA protege
08-03-2005, 12:11 PM
where can i get these mounts ?
steve_protege
08-04-2005, 10:43 AM
where can i get these mounts ?


The front and rear you can get from AWR.com. They have different mounts with different durometers to help keep the vibrations of the engine down once these are installed. Im not sure where to find the side mounts. I know a while back we had a GB on em, but I can't remember who sponsered it or what company it was from???
TampaSport20
08-04-2005, 03:05 PM
anyone know if someone sells motormounts for our cars ?

why not just poly your stockers with 3m window weld
steve_protege
08-05-2005, 09:40 AM
Is that what we can do for our side mounts as well?




why not just poly your stockers with 3m window weld
TampaSport20
08-05-2005, 06:15 PM
Is that what we can do for our side mounts as well?

yes.
00zmde
08-06-2005, 10:24 AM
How much window weld is needed? Does it last a long time?
steve_protege
08-11-2005, 01:04 PM
How would you go about poly-ing the side mounts with the weld?




why not just poly your stockers with 3m window weld