consloe help,,

[djsthe1aolcom]

dont anyone use the glade plug in thingies on your center dash, it leaked down onto the silver trim and totally messed it up. i have been reading all the posts about painting them and that seems like a good idea. i came across the post with how to dismantle the center console but i cant seem to get the cup holders to pop out. i figure if im gonna do the console around the radio it would look better with the center console to match. any tips and idea on how to remove them and a good clear coat? no one mentioned the type of clear coat they used. i read a post that says to alot yourself about 10 hours for the process, i guess thats for the drying? is there a way to put everything back and do it over a couple day period? any feed back would be great,

[Johndg]

Just yank it. It will un clip. Also instead of painting. Check us out at www.dgmotorsports.com CARBON FIBER.

[ForceFed]

Or Duplicolor it after sanding it with an 800 grit sand paper...preferably wet sand it...Use "seattle Silver" base and follow afterwards with a good coat of topcaot clear...you will like it and probably do all of your silver pieces.

[djsthe1aolcom]

well i was thinkin of going with a blue i used to paint the calipers with and that matches the seat coversi have. yea i saw the carbonb fiber thats awesome, does that cover the trim thats around the silver on the console?

[toucci]

I just painted mine today. I used 100 then 200,400,600 grit to prep the surface. I used "metallic silver" testors paint which is a bit brighter than the stock paint, but otherwise similar.

[trbomp5]

well i was thinkin of going with a blue i used to paint the calipers with and that matches the seat coversi have. yea i saw the carbonb fiber thats awesome, does that cover the trim thats around the silver on the console?

it replaces it all i believe. not covers it.