PDA

View Full Version : Gauges Won't light up



Rawyzf
06-17-2005, 12:04 PM
Ok...this is a little weird.

Yesterday I went to close my moonroof and it wouldn't budge. So I thought maybe that it was broke or something. Now last night I ran to the store and noticed that my Boost Gauge and Oil Temp Gauge lights don't light up either. The Boost Gauge reads boost, but no power is needed for that, so that is fine.

I am guessing I maybe have grounded and blew a fuse or something under the A pillar.

Anyone know what fuse would control those...or have any idea if it could be something else?

Thanks,
Ryan

lancebav
06-21-2005, 03:12 PM
Ok...this is a little weird.

Yesterday I went to close my moonroof and it wouldn't budge. So I thought maybe that it was broke or something. Now last night I ran to the store and noticed that my Boost Gauge and Oil Temp Gauge lights don't light up either. The Boost Gauge reads boost, but no power is needed for that, so that is fine.

I am guessing I maybe have grounded and blew a fuse or something under the A pillar.

Anyone know what fuse would control those...or have any idea if it could be something else?

Thanks,
Ryan

That depends on where and what wires you spliced into for power??? I have mine running to my parking lights... and that fuse is under the hood... so it depends what wires you have them hooked too...

Rawyzf
06-21-2005, 03:19 PM
Hey,

Found the wire running to the moonroof. I followed that all the way down to the dome light. Right next to the dome light, there was a fuse inserted in the middle of the wire...that was the fuse that blew. I just replaced that and BAM...everything works again!

Thanks,
Ryan

That depends on where and what wires you spliced into for power??? I have mine running to my parking lights... and that fuse is under the hood... so it depends what wires you have them hooked too...