FS: Engine Parts

[igdrasil]

Ok people I got this engine AND transmission (trans not shown because im not selling it) and I was looking to sell a few parts out of it. Its from a 2002 protege, 2.0L FSDE. If any of you want any additional pics or trade something or make a best offer...PM me

Heres the list of parts that are ready to go with the suggested sale price SHIPPING INCLUDED!!!, i can part out or do combo pricing, I just need to get rid of these parts:

Available stuff -=-=Prices Lowered!=-=-:

- Injectors - $57 shipped (3 sets avail.)
- Head w/cams - $300 shipped
- Stock Pistons w/ rods - $180 shipped
- Fuel rail w/ fpr - $27 shipped
- Valve cover - $59 shipped
- Stock Exhaust Manifold - $37.00 shipped
- Stock Turbo Modified Manifold- $130.00 shipped pic -> http://www.msprotege.com/members/igdrasil/smt6/stockmani_turbo.jpg
- Intake Manifold w/ TB - $159.00 shipped
- Intake Manifold w/o TB - $110.00 shipped
- Misc Sensors (selenoids, cam, crank, knock, oil, etc.) $offer$
- Oil Pan - $45 shipped
- Throttle Body Alone (2 avail) - $37.00 Shipped


Other parts f/s

- Turbo 2 intercooler - $37 shipped
- BEGI RRFPR: $160 shipped
- MSD Inline High Pressure Fuel PUMP - $100 shipped
- FM O2 modifier - $65 shipped.

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
<!-- / message --><!-- attachments -->
- Competition Clutch 4 puck sprung disk 2 months use - Not for sale anymore
- Spool FMIC I can do it for $210 shipped, has a ding behind/under it, no big deal. SOLD!
- Vortech FMU: $107 shipped SOLD!
- Std. HKS BOV - $45 SOLD!
- ACT Clutch kit (5 month of use in good condition) - SOLD

[igdrasil]

Added:

- BEGI RRFPR: $160 shipped

- MSD Inline High Pressure Fuel PUMP - $100 shipped

- FM O2 modifier - $65 shipped.

[igdrasil]

just in case

[peepsalot]

hmm, I might take you up on that valve cover. You interested in trading for an MSP valve cover? (naughty)


And maybe even the head. Agggh I don't know if I really want to do head work or not though. It's racking my brains.

[igdrasil]

hmm, I might take you up on that valve cover. You interested in trading for an MSP valve cover? (naughty)
And maybe even the head. Agggh I don't know if I really want to do head work or not though. It's racking my brains.

could be done. Head work is crucial for good power, if done good, you will gain a lot of power in the high rpms.

[wagonwhatmp5]

do u have a begi rrfpr??

[ForceFed]

Hey igdrasil....I would like to have a couple of these things....like the head and maybe the ACT ...but mainly the head....I know what you want....wanna make a deal?

[igdrasil]

Hey igdrasil....I would like to have a couple of these things....like the head and maybe the ACT ...but mainly the head....I know what you want....wanna make a deal?

I need the money buuuut....hmmm, sure, maybe we can arrange that too.

[ForceFed]

I need the money buuuut....hmmm, sure, maybe we can arrange that too.Maybe i will take a couple of things and get you a couple of things and throw some cash at ya too....I am sure we could probably come to an agreement.....Now i would just need a DAMN block.....I cant friggin find one locally yet either!

[igdrasil]

do u have a begi rrfpr??

I suppose to have it, I send it to another guy here in the forums for the turbo kit deal, he sent me some money and I sent him some parts including the BEGI rrfpr, but I havent heard of him and I need it back.

[ForceFed]

Whats the specs on the ACT and how many miles are on it do ya think...I assume you ran it in your ride....How many killer launchs on it as well...not that i care...It will get the same here!

[igdrasil]

Maybe i will take a couple of things and get you a couple of things and throw some cash at ya too....I am sure we could probably come to an agreement.....Now i would just need a DAMN block.....I cant friggin find one locally yet either!

I also have a spare block without crankshaft, but that thing is heavy!!!

[ForceFed]

See you got what i need...too bad its really heavy and probably kill me to ship...even if it was super slow shipping...Hmmmm.....I really could use all of that ....damnit...hmmmm?

[igdrasil]

Whats the specs on the ACT and how many miles are on it do ya think...I assume you ran it in your ride....How many killer launchs on it as well...not that i care...It will get the same here!

No, this was run on a 100shot protege, has like 3 racetrack launches and like 4 bottles of nitrous...and of course, some driving, the paint is all scratched because its been siting for almost a year, i was saving these parts for spare, but the not-yet-born babygirl is pulling a lot of money.

[igdrasil]

See you got what i need...too bad its really heavy and probably kill me to ship...even if it was super slow shipping...Hmmmm.....I really could use all of that ....damnit...hmmmm?

I use a company caller OverNight, shipping takes like 3 days on boat, but you need to arrange pickup in their warehouse or maybe a little extra for shipping to your door.

[ForceFed]

If you want to find out what shipping would be....that would be sweet...I could use the block....Will it have anything or is it COMEPLETELY bare....does it have the main caps or are they gone?I know the crank is gone...I wonder where i could find a crank at?

[miss_steele_msp]

pm'd about the clutch

[igdrasil]

If you want to find out what shipping would be....that would be sweet...I could use the block....Will it have anything or is it COMEPLETELY bare....does it have the main caps or are they gone?I know the crank is gone...I wonder where i could find a crank at?

it has the main caps of course, the crankshaft has been removed...its on the machine shop getting verified for forged rods.

[peepsalot]

how difficult is it to swap valve covers? is it just a couple bolts, do you need to drain fluids or anything?


could be done. Head work is crucial for good power, if done good, you will gain a lot of power in the high rpms.
So does that mean you would be interested in my MSP valve cover with mazdaspeed plastic valve cover cover?

[igdrasil]

how difficult is it to swap valve covers? is it just a couple bolts, do you need to drain fluids or anything?


So does that mean you would be interested in my MSP valve cover with mazdaspeed plastic valve cover cover?

its easy, its just the top bolts, no draining. And yes I am interested...but why would you want the Protege valve cover and not the msp valve cover and plastic...the msp valve cover is nice!

[AznXstazy]

partin out the engine parts? or are u trin to part out some of the engine bay too? if so willing to sell 2 rubber headlight pieces? or one?

[acidbbg]

you have been pm'd!

chas

[joka1]

do you have the o2 sensors? if so how much
rob

[peepsalot]

its easy, its just the top bolts, no draining. And yes I am interested...but why would you want the Protege valve cover and not the msp valve cover and plastic...the msp valve cover is nice!
I never keep the plastic cover on, I think it's just pointless. Seems like it would kinda keep heat in too, when I'd rather keep everything as cool as possible.

I want to get the other protege cover that doesn't have those studs for mounting the plastic cover, and probably cover it with wrinkle paint. I like that look a lot.

[igdrasil]

I have 1 only, the others are ripped but i havent thought about a price!


do you have the o2 sensors? if so how much
rob

[joka1]

well if you think of one let me know

[igdrasil]

everything is still for sale, bump for the morning

[Kooldino]

Do the injectors come with O-rings? are they in good shape?

[igdrasil]

Do the injectors come with O-rings? are they in good shape?

yep with O-rings...they are in good shape, never turboed

[igdrasil]

Custom Turbo Manifold out of the stock manifold added

http://www.msprotege.com/members/igdrasil/smt6/stockmani_turbo.jpg
Prices lowered

[JBreed]

ok...how low can you go? I will send you PM right now

[supa saiyan pr5]

Custom Turbo Manifold out of the stock manifold added

http://www.msprotege.com/members/igdrasil/smt6/stockmani_turbo.jpg
Prices lowered


That is sweet...very creative ..you must really be from the isle de coqui...hahahaah....what turbo would connect to that????? turbo flange???

Jeremy

[igdrasil]

That is sweet...very creative ..you must really be from the isle de coqui...hahahaah....what turbo would connect to that????? turbo flange???

Jeremy

I can connect any turbo, but that one was done for a regular TO3 flange. I have done 2, one for a Subaru WRX turbo and another for a T28. Both are working perfect.

[supa saiyan pr5]

I can connect any turbo, but that one was done for a regular TO3 flange. I have done 2, one for a Subaru WRX turbo and another for a T28. Both are working perfect.

What about a turbo that is internally wastegated??? how;s the clearance with the downpipe???? If I sent you a turbo can you see if it clears the engine and coolant hoses??? any more pics??


thanks also that BEGI when you get it back...let me know I'll buy it

Jeremy

[igdrasil]

the T28 was internally wastegated, no clearance issues. I havent heard a word of the guy receiving the package or anything. Ill let you know.




What about a turbo that is internally wastegated??? how;s the clearance with the downpipe???? If I sent you a turbo can you see if it clears the engine and coolant hoses??? any more pics??


thanks also that BEGI when you get it back...let me know I'll buy it

Jeremy

[igdrasil]

bump, anyone interested?

[ForceFed]

I am still interested in the head and cams....

[eljefe305]

i'm interested in the oil pan... pix?

[USAFMP5]

I'm interested in the intake manifold and a throttle body, the bigger of the two, if they are different sizes. However, the math done in figuring out the prices is rather incorrect. I will pay $147 for both shipped. Let me know what you think ASAP.

[acidbbg]

Hey, Do you have the oem down pipe for the protege engine? The part that connects 1st cat to the 2nd cat??

chas

[AznXstazy]

do you have any of the ac pieces for sale? im lookin for the high hose thanks

[Joshh]

dont have a down pipe to go with the turbo manifold do you?

[Captain KRM P5]

PM sent