Speed_ESQ
04-26-2005, 01:22 PM
Is anyone running one of these? Have you experienced any problems?
I've connected mine and with both nobs turned down, it still seems to want to go higher than stock - boost would still go over 10psi if I let it, but I obvuoulsy don't. I've replaced the vacuum lines with new ones, and double checked them, making sure that there was no obvious vacuum leaks. The only thing I didn't check was the rubber elbows that connect at the wastegate - are the rubber elbows known for leaking? Also, when I disconnect the mbc and return it to stock, the boost levels return to a stock 7psi - Generally, this would lead me to believe that it would be a vacuum leak, but because the lines have been replaced, I'm at a loss as to what it could be?
The unit is brand new, so I'm sure that there is nothing wrong with the mbc.
Cheers.
I've connected mine and with both nobs turned down, it still seems to want to go higher than stock - boost would still go over 10psi if I let it, but I obvuoulsy don't. I've replaced the vacuum lines with new ones, and double checked them, making sure that there was no obvious vacuum leaks. The only thing I didn't check was the rubber elbows that connect at the wastegate - are the rubber elbows known for leaking? Also, when I disconnect the mbc and return it to stock, the boost levels return to a stock 7psi - Generally, this would lead me to believe that it would be a vacuum leak, but because the lines have been replaced, I'm at a loss as to what it could be?
The unit is brand new, so I'm sure that there is nothing wrong with the mbc.
Cheers.