GB: MSP Magnum Rotors-Drilled-Cadmium Plated

[CasopoliS]

Group buy is officially over due to lack of interest. Thank you to those who participated.

Jon

[wickedjra]

interested. i'll know for sure on the 15th.

[phantom]

how much ship to T3A4Z8??

[peepsalot]

78741?

[justanotheradikt]

i have a dx, which has rear drum, but 4 lugs. so will this fit me? and if so can i get them for cheeper since i only need front rotors?

[CasopoliS]

i have a dx, which has rear drum, but 4 lugs. so will this fit me? and if so can i get them for cheeper since i only need front rotors?

No I am sorry. MSP's are slightly larger. I will see if they have sets of two for the dx.

Shipping quotes are on the way.

[RX]

Who is your supplier?

eBay has these listed for cheaper:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7965137631
http://search.ebay.com/protege-rotors_W0QQfkrZ1QQfromZR8

(no)

[peepsalot]

Who is your supplier?

eBay has these listed for cheaper:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7965137631
http://search.ebay.com/protege-rotors_W0QQfkrZ1QQfromZR8

(no)
Not sure the shipping for us, but Ebay s/h = $47.00

[CasopoliS]

The total cost would be the same if not cheaper. Good find.
Damn it seems you can get just about anything cheap on Ebay these days!
And yes they look very close.... I will look into it.

EDIT - come from same distributor. Price shown is without optional Cadmium coating. The coating is $50/set (from what I remember during our convo on the phone).

[noclue119]

Not sure the shipping for us, but Ebay s/h = $47.00

that is still cheaper.. 219+47 = 266 shipped

[RX]

219 + 47 = 266
266 - 250 = 16

Even if he could get each set shipped for $16, the price difference is negligible.
All I'm saying is if you are going to start a GB at least make it significantly cheaper for everyone.

BTW, Cas, I don't know if you already know but you have to be an AMM in order to even charge over the wholesale price.

[RX]

damn, you guys reply fast. :D

[CasopoliS]

I am sorry it seemed like a good deal to me. Rotorworks are ~$330 a set for zinc plating on their website. I looked at other prices to determine mine. I am not saying anything about Rotorworks, don't take that wrong.
I will look further into pricing.

[CasopoliS]

I just got off the phone....
I have worked out a deal to get these all the way down to $235 a set + shipping. If you want to find a better deal go ahead, I am not trying to shove any sales down your throat.... but please don't bog down this thread.

BTW I will try to get a pic soon with Mazda Forums written on something in the picture to follow rules.

[b00sted]

so is this like a minimum 10 ppl or something? or hows it gonna work, when/where do we send payment? ...thats cheap for 4 rotors!

UNOFFICIAL LIST
1. b00sted
2.
3.
4.
5.
6.
7.
8.
9.
10.

[Ryoga28]

The ones on ebay require an extra $30 for the cadmium coating...

So it's 220+47+30= $297 Ebay price
Depending on the shipping on the GB, it'll be lower of higher.

[CasopoliS]

The ones on ebay require an extra $30 for the cadmium coating...

So it's 220+47+30= $297 Ebay price
Depending on the shipping on the GB, it'll be lower of higher.

Thank you for the price update. He said $50 on the phone.... maybe he was just trying to make it sound like it was that much better of a deal or something..... I can get a shipping value for you so you can find out which one is cheaper.

I just want to let you guys know that I am not making any money here, nor was it ever my intention. This is so forum members can get a good deal, I have gotten great information and help on this forum.... I am not going to try to get $ as well.

[Ryoga28]

Thanks Casopolis. I totally understand your position. I was interested in purchasing these rotors before your gb and I believe this gb will save us some money.

Btw, for the pads, I believe ********** has them for about $80 total. So it may be prudent to purchase the rotors here and then buy the pads from **********.

[girth]

How much for shipping to 54475?

Do you know if they sell braided lines for the MSP, and if so how much for those?

[CasopoliS]

Thanks Casopolis. I totally understand your position. I was interested in purchasing these rotors before your gb and I believe this gb will save us some money.

Btw, for the pads, I believe ********** has them for about $80 total. So it may be prudent to purchase the rotors here and then buy the pads from **********.

Well just for comparison, they are $74 for one set. This is $90 for both. Street unit is a good company.

[Ryoga28]

Opps...I should've read it more carefully.

Also I'm interested in the braided lines for the MSP.

[Fai]

So the $235 includes cad plate??? btw I live in Canada very close to that supplier, can i pick them up locally (so no shipping for me i guess)??

UNOFFICIAL LIST
1. b00sted
2. Fai
3.
4.
5.
6.
7.
8.
9.
10.<!-- / message --><!-- sig -->

[CasopoliS]

So the $235 includes cad plate??? btw I live in Canada very close to that supplier, can i pick them up locally (so no shipping for me i guess)??


Yes it does. I will ask about pickup.

UPDATE, Shipping is $45. If you are in Canada.... I can get a specific shipping quote for you, it might be cheaper.

[CasopoliS]

Bump, looking for 8 more people

[Fai]

Bump, looking for 8 more people

Yea comeon ppl is good deal.
Jon are u suppose to put urself on the list also??

[CasopoliS]

^ done.

BTW there is no true deadline to this GB, but the sooner the better.

[slug420]

I am sorry it seemed like a good deal to me. Rotorworks are ~$330 a set for zinc plating on their website. I looked at other prices to determine mine. I am not saying anything about Rotorworks, don't take that wrong.
I will look further into pricing.

now through wed rotorworks are 264 for all 4 rotors cross-drilled and slotted with FREE shipping. add zinc plating anf its 294 shipped.

***************

this GB is 280 so still a little cheaper though

[RX]

wow, what a way to jack a thread.

[slug420]

i closed by pointing out that this GB is cheaper. Just mentioning that 330 wasnt accurate

[RX]

oic

[CHICO2003]

oh man... these look badass. how much would a shop charge to install these?

[Ryoga28]

I was quoted $300 ish at the dealership and $200ish at pepboys. Meincke (sp) said it may be $600 in labor because mazdas are hard to work with....(dumbass)

[CasopoliS]

Rotor install? I think its easy, but it is all up to the user.

[Fai]

oh man... these look badass. how much would a shop charge to install these?

You can do it yourself, Check "How To" section is pretty easy to do :)

[rynotar]

UNOFFICIAL LIST
1. b00sted
2. Fai
3. Casopolis
4. rynotar
5.
6.
7.
8.
9.
10.

[OldYellerSpeed]

Sorry but i dont know if this fourm has a standard currenc but if they are shipping it out from Canada is it a Canadian price? I was always under the impression that slotted = street, cross drilled = track. Depending on how much the install would be, I would aslo be interested.

[girth]

Sorry but i dont know if this fourm has a standard currenc but if they are shipping it out from Canada is it a Canadian price? I was always under the impression that slotted = street, cross drilled = track. Depending on how much the install would be, I would aslo be interested.

Good question - I guess I was assuming US dollar so it'd be good to clear this up. I think I'm in on this either way but I'll wait to put my name on the list yet. As far as drilled vs slotted, you're right. Generally people don't get drilled unless they're racing. But since the MSP seems to have a problem with warped rotors I think getting drilled is a good idea for the heat reduction. I like the stopping power of the stock rotors and pads, so no need for slots IMO. Just eats pads faster.

[CasopoliS]

Yes they are USD. If you are in Canada, do the conversion and there is your price. Local pickup is available, the distributor is in Toronto... that will be arranged when the time comes.

If you want braided lines add $85 to total price. We are cheking on availability now.... if you want a set please let me know so we can get an idea.

BTW shipping rates are very low if you are local and shipping might be better than the gas! If you want a specifi quote, please let me know.

Install of rotors is fairly easy. Here is a sample install on the front.
http://www.msprotege.com/forum/showthread.php?t=43890&highlight=rotors

[peepsalot]

What is the deal with braided lines? They really make any difference?

[OldYellerSpeed]

Thanks Casoplis for the reply. I dont know if it was just me but I didnt notice if you posted the Inch of the rotors. Can anyone comment on the braided line. Id perfer someone who has them installed... aslo, does any1 know of any slotted breaks for the msp?

[slug420]

slotted only, corksport sells kvr rotors that are only slotted.

slotted and drilled, *************** sells them

he has a sale on them that ends tonight actually

[Fai]

(bump)

[CasopoliS]

GB is still running. This is a good deal guys!!

[Ryoga28]

Need to wait until July...I just splurged on GT Spec parts...

[OldYellerSpeed]

Is this GB still happaning? its been acouple days and no1 has posted :(. And are the rotors the same size as the stock MSP's? To my understanding the price is 235+ 45 shipping, you mentioned before for the people who live near toronto are going to have cheap shipping, any idea on how much? Aslo do you think the gold rotors would look good on a yellowspeed /w tinted windows (killit)

[CasopoliS]

Is this GB still happaning? its been acouple days and no1 has posted :(. And are the rotors the same size as the stock MSP's? To my understanding the price is 235+ 45 shipping, you mentioned before for the people who live near toronto are going to have cheap shipping, any idea on how much? Aslo do you think the gold rotors would look good on a yellowspeed /w tinted windows (killit)

They would look good on anything. They are stock size. Give me your address and zip code / area via PM. I will get you a shipping quote. T

The distributor has 10 waiting for me... but don't know how long he will hold off. Next time we talk I think a GB closing date will be addressed. Thanks for the interest.

[Fai]

OldYellowerSpeed- Do you live in Maple, Ontario? is it inside of vaughan, cause Night's Auto is in Scarborough, fairly close to you, might wanna pick up locally to save some shipping. gold rotors will look nice, matches ur car :)

Casopolis- For the brake pads is there any other choice than MatelMaster, I need some better pads for track day use

~Andy

[CasopoliS]

OldYellowerSpeed- Do you live in Maple, Ontario? is it inside of vaughan, cause Night's Auto is in Scarborough, fairly close to you, might wanna pick up locally to save some shipping. gold rotors will look nice, matches ur car :)

Casopolis- For the brake pads is there any other choice than MatelMaster, I need some better pads for track day use

~Andy

I will look into the pads for you. I just hope we get 10 people!

[Fai]

bump.. need more ppl!!

[rynotar]

UNOFFICIAL LIST
1. b00sted
2. Fai
3. Casopolis
4. rynotar <<<<<< PLEASE REMOVE
5.
6.
7.
8.
9.
10.

I no longer need the brakes i had to get a new pair immidiatly because my brakes were shot... thanks

[slug420]

haha, back to 3...

i dont know why you guys didnt just buy the ********** one while we had that GB going..

[CasopoliS]

haha, back to 3...

i dont know why you guys didnt just buy the ********** one while we had that GB going..

This was a slightly better deal, so they were holding out to see if there was more interest. Too bad there wasn't. They can always get good deals on these rotors through Nights Auto, just tell them Jon sent you.