PDA

View Full Version : 263.4whp!!!! Oh yea!!!

505zoom
03-21-2005, 03:09 PM
I got a single run in today over at The Dyno Edge. I got there right when they were about to put the supercharged viper on for some tuning, and they were going to be at it all day most likely, so they let me get a quick one in to see where I am at after the new FMIC from Mental Addiction. I even got to run it for free this time.:D I guess my last pulls made the operator dig my car more than I realized.:)

So here it is, 12psi, same maps as my last runs, only change was the FMIC... 263.4whp and 253.0wtq. That's 5 more whp and the same wtq as my runs with the iON FMIC.

http://www.msprotege.com/members/505zoom/263whpdynosheet.jpg

The beast lives on.(rockon)
THEGOLDPRO
03-21-2005, 03:12 PM
nice numbers, cool shit.
TX Speed Demon
03-21-2005, 03:12 PM
Nice numbers :)
peepsalot
03-21-2005, 03:14 PM
why such a dip at 3.6k?
pdhaudio83
03-21-2005, 03:14 PM
needs some tuning!! lolz
peepsalot
03-21-2005, 03:16 PM
Very nice numbers BTW. Don't you still have stock rods? (boom02) How long you think it will hold up?
505zoom
03-21-2005, 03:17 PM
why such a dip at 3.6k?

My guess is that I just have far too much timing pulled right there to be safe for the max tq point. Now that I have some data for the AFR values, and I will be running this setup for awhile, I am going to go ahead and adjust my maps to smooth out that dip at 3500 and clean up the AFR where it dips to 10.
Paul
03-21-2005, 03:19 PM
what other mods do u have? nice numbers
Focus
03-21-2005, 03:19 PM
You still have the MPI installed ?
505zoom
03-21-2005, 03:20 PM
Very nice numbers BTW. Don't you still have stock rods? (boom02) How long you think it will hold up?

Been holding at this level for about 4 months now, yes I am still running the stock motor. I am hoping she holds up for a few more months until my motor is ready.:)
505zoom
03-21-2005, 03:23 PM
what other mods do u have? nice numbers

Full list is here:

http://www.cardomain.com/memberpage/495104

But here are the main power making mods for the run:

GT28RS
Mental Addiction FMIC
Mental Addiction tubular exhaust manifold
SRI with APEX'i cone
BoostSciences MBC at 12psi
3" downpipe back with 1 cat
MPI tuner for extra injector and timing control
505zoom
03-21-2005, 03:24 PM
You still have the MPI installed ?

Still not using the analog control, but yes I am still using the MPI for EIC and timing.:)
Focus
03-21-2005, 03:27 PM
OK cause I was gonna say that could be the turbo module kicking in.

Still not using the analog control, but yes I am still using the MPI for EIC and timing.:)
MSP #167
03-21-2005, 03:27 PM
wow very nice i'm jealous
Swerny
03-21-2005, 03:29 PM
Well done!
For purely selfish reasons, i'm glad to see there was only a 5 HP increase over the Ion kit.
low_psi
03-21-2005, 03:34 PM
Hot damn, its just getting better and better :)
505zoom
03-21-2005, 03:35 PM
Well done!
For purely selfish reasons, i'm glad to see there was only a 5 HP increase over the Ion kit.

Haha, yea. The iON is a very good kit. Their core looks damn near identical to the Mental Addiction Garrett core... well, aside from the polished finish that is.:p
505zoom
03-21-2005, 03:38 PM
Hot damn, its just getting better and better :)

(mswerd)

I LOVE MY MAZDASPEED!!!!

(laugh)
low_psi
03-21-2005, 03:39 PM
BTW, feel like shipping me your PWR radiator too? lol
505zoom
03-21-2005, 03:43 PM
BTW, feel like shipping me your PWR radiator too? lol

Haha, not at all.:)
505zoom
03-21-2005, 04:43 PM
Bump because I'm bored and it is too windy to do anything outside.:p
low_psi
03-21-2005, 04:58 PM
damn. going by the bank tomorrow at lunch btw ;)
505zoom
03-21-2005, 04:59 PM
damn. going by the bank tomorrow at lunch btw ;)

(yippy)
DigitalHeadShot
03-21-2005, 05:19 PM
nice...
BlkZoomZoom
03-21-2005, 05:26 PM
run it yet?
505zoom
03-21-2005, 05:38 PM
run it yet?

Bwahaha, run what?
mspeed101
03-21-2005, 05:39 PM
Great numbers. Especially on stock internals!
Kooldino
03-21-2005, 05:41 PM
Still not using the analog control, but yes I am still using the MPI for EIC and timing.:)

(birthday)

Good job, man.
505zoom
03-21-2005, 05:42 PM
Great numbers. Especially on stock internals!

Stock internals, stock head, stock TB, stock MAF, stock LSD, stock (original) clutch.... hahaha, see blk, I can still do it too.:p
mspeed101
03-21-2005, 05:44 PM
Stock internals, stock head, stock TB, stock MAF, stock LSD, stock (original) clutch.... hahaha, see blk, I can still do it too.:p(lol)
505zoom
03-21-2005, 05:46 PM
(birthday)

Good job, man.

The way to go for sure.
peepsalot
03-21-2005, 05:46 PM
Damn, you really have a stock clutch and it is not slipping, 505? Mine seems to slip every now and then, and my numbers aren't even close to yours.
505zoom
03-21-2005, 05:49 PM
Damn, you really have a stock clutch and it is not slipping, 505? Mine seems to slip every now and then, and my numbers aren't even close to yours.

Yup, just hit 30k on it too. I baby my car when it isn't on the dyno... well most of the time that is.(evil)
RyanJayG
03-21-2005, 05:50 PM
dude, Rich.... awesome news... you really need to tune out that dip, and steady up the afr's though I think you should leave it that rich up top.... for safety sake... I fear for your rods... lol... just think about how blowing it up will dissapoint your cool mom!
peepsalot
03-21-2005, 06:00 PM
Cool mom? (pics)

When you say cool, I assume you mean hot.
505zoom
03-21-2005, 06:14 PM
dude, Rich.... awesome news... you really need to tune out that dip, and steady up the afr's though I think you should leave it that rich up top.... for safety sake... I fear for your rods... lol... just think about how blowing it up will dissapoint your cool mom!

Lol, yea we can't have that now can we?


Cool mom? (pics)

When you say cool, I assume you mean hot.

Haha, no pics.(no)
BlkZoomZoom
03-21-2005, 06:15 PM
(rockon) Thats why you got that much hp. lol
mspeed101
03-21-2005, 07:29 PM
(rockon) Thats why you got that much hp. lolAlright thats it im going back to stock so I can run 12s
mazdaspeed75
03-21-2005, 07:54 PM
nice Man thanks for all the help man . Hopeing to dyno once i get the hang of this tunning .
Hypnotized
03-21-2005, 08:24 PM
Those are some damn sweet numbers!! I cant beleive your still on stock internals. Would you consider seeing how long it would last before you throw your new motor in? Im am very curious how long it will last. You said you had 30K on it right? How many miles did you have on it when you started to do some serious mods to it?
BlkZoomZoom
03-21-2005, 08:27 PM
Mine lasted 320 quarter mile passes at comparable hp levels....
Hypnotized
03-21-2005, 08:31 PM
Thats pretty damn good. Did it blow on the track?
BlkZoomZoom
03-21-2005, 08:32 PM
6000rpm in 4th gear.
505zoom
03-21-2005, 08:39 PM
Hey, can it with the talk of blown motors in this thread.(chair) You guys are gonna jinx me.:p

Those are some damn sweet numbers!! I cant beleive your still on stock internals...

Thanks, me either.:)

Would you consider seeing how long it would last before you throw your new motor in?

That's the plan.

...You said you had 30K on it right? How many miles did you have on it when you started to do some serious mods to it?

Yup. I started modding at 5k, and I guess you could say it got serious around the time of the EMS which was at about 15k. I have been running at least 220+ for my high setting since then.
jurgs01
03-21-2005, 09:12 PM
Nice numbers Rich! Can't wait till I get my MPI tuned. Only wish I had your turbo.
BOOSTR
03-21-2005, 09:25 PM
Great numbers for sure. With your tuning, your stock motor will be fine. I have 42,200 on my stock clutch.

Keep up the good work and representing the Black Mica's. (mspblack)
spike blue
03-22-2005, 08:44 PM
nice numbers
jrodhotrod
03-22-2005, 09:31 PM
Belated congrats on the nice numbers!

As the other guy said, I feel better about my ION core thanks to you. After looking at the pictures and hearing your testimony I think it's the same core, just diffrent end tanks.