View Full Version : MSP engine parts for sale
boosted protege
03-21-2005, 12:39 AM
just had to swap engines and have a several parts for sale..
all parts out of an 03 Mazdaspeed Protege with 35,000 miles
complete head minus valve cover looks like 2 intake valves stuck open $150 shipped
stock cams $75 plus shipping
intake manifold $100 plus shipping
throttle body $50 plus shipping***sold***
1 set of stock injectors $25 shipped
stock callaway turbo manifold $100 plus shipping..The 1 for $100 needs the bolts removed from the bottom of it
stock mazdaspeed clutch $50 shipped
there are more parts than this..And i will post pics when we put the motor back in this week....Need to try and recoupe some of the cost of the new motor so no resonable offers refused
brads03p5
03-21-2005, 03:47 AM
how much for a manifold and/or head?
Super Matty P
03-21-2005, 03:50 AM
I'm interested in the intake manifold without TB. shoot me a pm with an offer shipped to 35114 (B'ham, AL) thanks.
boosted protege
03-21-2005, 04:54 PM
prices added..I will be taking pics when i go to put the motor back in wed. night
thanks Jason
PaulMP3
03-21-2005, 04:56 PM
pics of the exhaust manifold with the bolts in it.
im probally interested.
dibs on the throttle body once pics get up.
anyone know what size the stock tb is?
Super Matty P
03-21-2005, 06:30 PM
55mm
boosted protege
03-22-2005, 11:02 PM
i also have the stock plastic engine cover minus the mazdaspeed emblem..and 2 stock 2003 polished protege 5 wheels i was using with my drag radials but went to 15s instead of 16s
QCMSP
03-23-2005, 12:10 AM
what about pic of all youre stuff ?????
boosted protege
03-29-2005, 01:16 AM
bump
GHOSTWHISPER
03-29-2005, 04:51 AM
http://www.msprotege.com/forum/showthread.php?t=98864
please follow the new rules, about pictures and selling. Thanks, I dont want to close the thread. Thanks again.
midnite911
03-30-2005, 08:53 PM
how about valve cover
jakemp3surfin
03-31-2005, 06:38 PM
just had to swap engines and have a several parts for sale..
all parts out of an 03 Mazdaspeed Protege with 35,000 miles
complete head minus valve cover and intake cam gear $400 plus shipping
intake manifold $100 plus shipping
throttle body $50 plus shipping
2 sets of stock injectors $50 per set shipped
2 stock callaway turbo manifolds 1 for $200 plus shipping..1 for $100 plus shipping..The 1 for $100 needs the bolts removed from the bottom of it
stock mazdaspeed clutch $100 shipped
mazdaspeed manifold heat shield $40 plus shipping
several good sensors left over
there are more parts than this..And i will post pics when we put the motor back in this week....Need to try and recoupe some of the cost of the new motor so no resonable offers refusedi'm interested in the exhaust manifold. i sent a pm
boosted protege
04-11-2005, 02:54 PM
pics and updated prices....btw below are pics of what happens when you run to much boost with not enough fuel
BlkZoomZoom
04-11-2005, 06:18 PM
pics and updated prices....btw below are pics of what happens when you run to much boost with not enough fuel
Sure looks like a rod failed to me....
$$50 shipped via paypal ?? for the throttle body.
FSDET
04-12-2005, 03:25 AM
do u have a valve cover for sale ?
boosted protege
04-12-2005, 10:17 PM
do u have a valve cover for sale ?
no the valve cover was damaged on my new motor so i had to use my old one
Doodsmack
04-12-2005, 10:33 PM
I'm interested in the Main Bearing Support Plate and oil lines.
boosted protege
04-16-2005, 10:45 AM
throttle body sold
wickedjra
04-16-2005, 11:48 AM
pm sent
boosted protege
04-23-2005, 11:11 PM
pms anwsered
PRican_Angel
05-08-2005, 01:34 PM
r u selling the whole motor?? would it fit a 2.0 motor for an automatic protege??
igdrasil
05-08-2005, 01:41 PM
whats left? im interested on the injectors, and maybe the intake manifold
boosted protege
05-09-2005, 11:24 PM
whats left? im interested on the injectors, and maybe the intake manifold
i have the intake manifold and injectors...Ill have to check on shipping when i get to my shop on tues.. but if shipping aint to much of a hassle ill do manifold, injectors and ill throw in the fuel rail for 125 plus shiping
igdrasil
05-10-2005, 08:46 AM
i have the intake manifold and injectors...Ill have to check on shipping when i get to my shop on tues.. but if shipping aint to much of a hassle ill do manifold, injectors and ill throw in the fuel rail for 125 plus shiping
sounds good.
mazdaspeed45
05-14-2005, 10:36 PM
exhaust manifold still for sale?
intake manifold for sale still? *dibs*
BirdManIDC
06-06-2005, 09:40 PM
hey do u have this?
still waiting to hear about the manifold. cash in hand
mazdaspeed45
06-06-2005, 10:18 PM
Do you still have the exhaust manifold and s pipe for sale?
just had to swap engines and have a several parts for sale..
all parts out of an 03 Mazdaspeed Protege with 35,000 miles
complete head minus valve cover looks like 2 intake valves stuck open $150 shipped
stock cams $75 plus shipping
intake manifold $100 plus shipping
throttle body $50 plus shipping***sold***
1 set of stock injectors $25 shipped
stock callaway turbo manifold $100 plus shipping..The 1 for $100 needs the bolts removed from the bottom of it
stock mazdaspeed clutch $50 shipped
there are more parts than this..And i will post pics when we put the motor back in this week....Need to try and recoupe some of the cost of the new motor so no resonable offers refused
Powered by vBulletin® Version 4.1.7 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.